The development of a scanning strategy for the manufacture of porous biomaterials by selective laser melting

[1]  Lewis Mullen,et al.  Selective Laser Melting: a regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[2]  J. Galante,et al.  Primary total hip arthroplasty with a porous-coated acetabular component. A concise follow-up, at a minimum of twenty years, of previous reports. , 2009, The Journal of bone and joint surgery. American volume.

[3]  T. Sercombe,et al.  Heat treatment of Ti‐6Al‐7Nb components produced by selective laser melting , 2008 .

[4]  S. Kurtz,et al.  The Potential for Bone Loss in Acetabular Structures Following THA , 2006, Clinical orthopaedics and related research.

[5]  Neil Hopkinson,et al.  Emerging Rapid Manufacturing Processes , 2006 .

[6]  Neil Hopkinson,et al.  Rapid manufacturing : an industrial revolution for the digital age , 2006 .

[7]  M. von Walter,et al.  Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming. , 2006, Biomaterials.

[8]  R. J. Lewis,et al.  Radiographic evaluation of a monoblock acetabular component: a multicenter study with 2- to 5-year results. , 2005, The Journal of arthroplasty.

[9]  Maxence Bigerelle,et al.  Topography effects of pure titanium substrates on human osteoblast long-term adhesion. , 2005, Acta biomaterialia.

[10]  Yoshiaki Toyama,et al.  Osseointegration of a hydroxyapatite-coated multilayered mesh stem. , 2004, Biomaterials.

[11]  Kozo Osakada,et al.  Microstructure and mechanical properties of pure titanium models fabricated by selective laser melting , 2004 .

[12]  J. Galante,et al.  Primary total hip arthroplasty with a porous-coated acetabular component. A concise follow-up of a previous report. , 2004, The Journal of bone and joint surgery. American volume.

[13]  S. Stulberg.  Acetabular fixation options: notes from the other side. , 2003, Orthopedics.

[14]  Michel Assad,et al.  Porous titanium-nickel for intervertebral fusion in a sheep model: part 1. Histomorphometric and radiological analysis. , 2003, Journal of biomedical materials research. Part B, Applied biomaterials.

[15]  K. Widmer,et al.  Load transfer and fixation mode of press-fit acetabular sockets. , 2002, The Journal of arthroplasty.

[16]  C. Engh,et al.  The odyssey of porous-coated fixation. , 2002, The Journal of arthroplasty.

[17]  G. Bergmann,et al.  Hip contact forces and gait patterns from routine activities. , 2001, Journal of biomechanics.

[18]  Chee Kai Chua,et al.  POWDER-BASED RAPID PROTOTYPING SYSTEMS , 2000 .

[19]  F Eckstein,et al.  Quantitative determination of joint incongruity and pressure distribution during simulated gait and cartilage thickness in the human hip joint , 1999, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[20]  Michael Tanzer,et al.  Tissue response to porous tantalum acetabular cups: a canine model. , 1999, The Journal of arthroplasty.

[21]  J. Thomsen,et al.  The hemispherical Harris-Galante acetabular cup, inserted without cement. The results of an eight to eleven-year follow-up of one hundred and sixty-eight hips. , 1999, The Journal of bone and joint surgery. American volume.

[22]  Kenneth J. A. Brookes.  Submicron carbides making the grade , 1998 .

[23]  D. Hungerford,et al.  Proximally coated ingrowth prostheses. A review. , 1997, Clinical orthopaedics and related research.

[24]  J. Galante,et al.  Cellular mediators secreted by interfacial membranes obtained at revision total hip arthroplasty. , 1995, The Journal of arthroplasty.

[25]  R. Huiskes,et al.  Load transfer across the pelvic bone. , 1995, Journal of biomechanics.

[26]  G. Bergmann,et al.  Hip joint loading during walking and running, measured in two patients. , 1993, Journal of biomechanics.

[27]  M. Mayor,et al.  Osseointegration of titanium implants in total hip arthroplasty. , 1990, Clinical orthopaedics and related research.

[28]  L. Dorr,et al.  Histologic, biochemical, and ion analysis of tissue and fluids retrieved during total hip arthroplasty. , 1990, Clinical orthopaedics and related research.

[29]  M. Wolcott.  Cellular solids: Structure and properties , 1990 .

[30]  G. Kotzar,et al.  Effects of repetitive loading on the integrity of porous coatings. , 1987, Clinical orthopaedics and related research.

[31]  J. Davidson,et al.  The effect of HIPing on the fatigue and tensile strength of a case, porous-coated Co-Cr-Mo alloy. , 1986, Journal of biomedical materials research.

[32]  R. Crowninshield,et al.  A stress analysis of acetabular reconstruction in protrusio acetabuli. , 1983, The Journal of bone and joint surgery. American volume.

[33]  R M Pilliar,et al.  The optimum pore size for the fixation of porous-surfaced metal implants by the ingrowth of bone. , 1980, Clinical orthopaedics and related research.

[34]  M. Semlitsch,et al.  Reactions of the articular capsule to wear products of artificial joint prostheses. , 1977, Journal of biomedical materials research.

[35]  J. L. Niles,et al.  Biomechanical evaluation of bone-porous material interfaces. , 1973, Journal of biomedical materials research.

[36]  Andrey V. Gusarov,et al.  Mechanisms of selective laser sintering and heat transfer in Ti powder , 2003 .

[37]  Andreas Gebhardt,et al.  Rapid prototyping , 2003 .

[38]  Michael Tanzer,et al.  Characteristics of bone ingrowth and interface mechanics of a new porous tantalum biomaterial. , 1999, The Journal of bone and joint surgery. British volume.

[39]  C. Subramanian,et al.  The role of refractory element based coatings on the tribological and biological behaviour of orthopaedic implants , 1996 .

[40]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[41]  G. Hamman.  Comparison of Measurement Methods for Characterization of Porous Coatings , 1987 .

[42]  Jack E. Lemons,et al.  Quantitative characterization and performance of porous implants for hard tissue applications : a symposium sponsored by ASTM Committee F-4 on Medical and Surgical Materials and Devices, Nashville, TN, 18-19 Nov. 1985 , 1987 .

[43]  W H Harris,et al.  Bone ingrowth into porous coated canine acetabular replacements: the effect of pore size, apposition, and dislocation. , 1985, The Hip.

[44]  E. Korostoff,et al.  Research in dental and medical materials : proceedings , 1969 .

[45]  N. Rydell.  Forces acting on the femoral head-prosthesis. A study on strain gauge supplied prostheses in living persons. , 1966, Acta orthopaedica Scandinavica.