Intense pulsed light induced crystallization of a liquid-crystalline polymer semiconductor for efficient production of flexible thin-film transistors.

Here we demonstrated the split-second crystallization of a liquid-crystalline conjugated polymer semiconductor induced by irradiation with intense pulsed white light (IPWL) for the efficient improvement of electrical properties of flexible thin film transistors. A few seconds of IPWL irradiation of poly(didodecylquaterthiophene-alt-didodecylbithiazole) (PQTBTz-C12) thin films generated heat energy through the photo-thermal effect, leading to the crystallization of PQTBTz-C12 and formation of nodule-like nanostructures. The IPWL-induced crystallization of PQTBTz-C12 resulted in a threefold improvement in the field-effect mobility of thin film transistors compared to as-prepared devices. The conformational change of the PQTBTz-C12 chains was found to be strongly related to the irradiation fluence. As a proof-of-concept, the IPWL treatment was successfully applied to the PQTBTz-C12 layer in flexible transistors based on plastic substrates. The performance of these flexible devices was significantly improved after only 0.6 s of IPWL treatment, without deformation of the plastic substrate.

[1]  Hung Phan,et al.  High‐Mobility Field‐Effect Transistors Fabricated with Macroscopic Aligned Semiconducting Polymers , 2014, Advanced materials.

[2]  Tae Whan Kim,et al.  Split-second nanostructure control of a polymer:fullerene photoactive layer using intensely pulsed white light for highly efficient production of polymer solar cells. , 2014, ACS applied materials & interfaces.

[3]  K. Shinozaki,et al.  Cu salt ink formulation for printed electronics using photonic sintering. , 2013, Langmuir : the ACS journal of surfaces and colloids.

[4]  Yong-Won Song,et al.  Cu ion ink for a flexible substrate and highly conductive patterning by intensive pulsed light sintering. , 2013, ACS applied materials & interfaces.

[5]  F. Krebs,et al.  Rapid flash annealing of thermally reactive copolymers in a roll-to-roll process for polymer solar cells , 2012 .

[6]  Markus Hösel,et al.  Large-scale roll-to-roll photonic sintering of flexo printed silver nanoparticle electrodes , 2012 .

[7]  Wi Hyoung Lee,et al.  Molecular Weight‐Induced Structural Transition of Liquid‐Crystalline Polymer Semiconductor for High‐Stability Organic Transistor , 2011 .

[8]  Samson A. Jenekhe,et al.  Effects of Side Chains on Thiazolothiazole‐Based Copolymer Semiconductors for High Performance Solar Cells , 2011 .

[9]  S. Jenekhe,et al.  Benzobisthiazole-Based Donor–Acceptor Copolymer Semiconductors for Photovoltaic Cells and Highly Stable Field-Effect Transistors , 2011 .

[10]  Bertram Batlogg,et al.  Calculating the trap density of states in organic field-effect transistors from experiment: A comparison of different methods , 2009, 0912.4106.

[11]  Rodolfo Cruz-Silva,et al.  Flash reduction and patterning of graphite oxide and its polymer composite. , 2009, Journal of the American Chemical Society.

[12]  Wi Hyoung Lee,et al.  Liquid-crystalline semiconducting copolymers with intramolecular donor-acceptor building blocks for high-stability polymer transistors. , 2009, Journal of the American Chemical Society.

[13]  K. Nakayama,et al.  Mesophase semiconductors in field effect transistors , 2007 .

[14]  Do Hwan Kim,et al.  Low-voltage polymer thin-film transistors with a self-assembled monolayer as the gate dielectric , 2005 .

[15]  Burak Temelkuran,et al.  External Reflection from Omnidirectional Dielectric Mirror Fibers , 2002, Science.

[16]  Zakya H. Kafafi,et al.  Indium tin oxide thin films grown on flexible plastic substrates by pulsed-laser deposition for organic light-emitting diodes , 2001 .

[17]  S. Yun,et al.  Low-Temperature Deposition of Aluminum Oxide on Polyethersulfone Substrate Using Plasma-Enhanced Atomic Layer Deposition , 2004 .

[18]  Robert A. Street,et al.  Pentacene thin film transistors on inorganic dielectrics: Morphology, structural properties, and electronic transport , 2003 .