A machine learning-based multiscale model to predict bone formation in scaffolds

[1]  G. Duda,et al.  Initial mechanical conditions within an optimized bone scaffold do not ensure bone regeneration – an in silico analysis , 2021, Biomechanics and Modeling in Mechanobiology.

[2]  Julián A. Norato,et al.  Bone Adaptation-Driven Design of Periodic Scaffolds , 2021 .

[3]  G. Duda,et al.  Mechano-Biological Computer Model of Scaffold-Supported Bone Regeneration: Effect of Bone Graft and Scaffold Structure on Large Bone Defect Tissue Patterning , 2020, Frontiers in Bioengineering and Biotechnology.

[4]  Qiang Chen,et al.  Mechanical–chemical coupled modeling of bone regeneration within a biodegradable polymer scaffold loaded with VEGF , 2020, Biomechanics and Modeling in Mechanobiology.

[5]  Qiang Chen,et al.  How does mechanical stimulus affect the coupling process of the scaffold degradation and bone formation: An in silico approach , 2020, Comput. Biol. Medicine.

[6]  Qing Li,et al.  Time-dependent topology optimization of bone plates considering bone remodeling , 2020 .

[7]  P. Wriggers,et al.  A machine learning based plasticity model using proper orthogonal decomposition , 2020, Computer Methods in Applied Mechanics and Engineering.

[8]  M Mozaffar,et al.  Deep learning predicts path-dependent plasticity , 2019, Proceedings of the National Academy of Sciences.

[9]  S. De,et al.  Integrating machine learning and multiscale modeling—perspectives, challenges, and opportunities in the biological, biomedical, and behavioral sciences , 2019, npj Digital Medicine.

[10]  Vee San Cheong,et al.  Partial Bone Formation in Additive Manufactured Porous Implants Reduces Predicted Stress and Danger of Fatigue Failure , 2019, Annals of Biomedical Engineering.

[11]  Juhyun Lee,et al.  Cardiac tissue engineering: state-of-the-art methods and outlook , 2019, Journal of Biological Engineering.

[12]  S. Hofmann,et al.  A multiscale computational fluid dynamics approach to simulate the micro-fluidic environment within a tissue engineering scaffold with highly irregular pore geometry , 2019, Biomechanics and Modeling in Mechanobiology.

[13]  Daniel A. White,et al.  Multiscale topology optimization using neural network surrogate models , 2019, Computer Methods in Applied Mechanics and Engineering.

[14]  H. Zreiqat,et al.  A Novel Bone Substitute with High Bioactivity, Strength, and Porosity for Repairing Large and Load‐Bearing Bone Defects , 2019, Advanced healthcare materials.

[15]  Qiang Chen,et al.  Mathematical modeling of bone in-growth into undegradable porous periodic scaffolds under mechanical stimulus , 2019, Journal of tissue engineering.

[16]  H. Zreiqat,et al.  Architectural Design of 3D Printed Scaffolds Controls the Volume and Functionality of Newly Formed Bone , 2018, Advanced healthcare materials.

[17]  Yujie Zhang,et al.  Deep learning–based inverse method for layout design , 2018, Structural and Multidisciplinary Optimization.

[18]  Vee San Cheong,et al.  Novel adaptive finite element algorithms to predict bone ingrowth in additive manufactured porous implants. , 2018, Journal of the mechanical behavior of biomedical materials.

[19]  James C. Weaver,et al.  Mechanobiologically optimized 3D titanium-mesh scaffolds enhance bone regeneration in critical segmental defects in sheep , 2018, Science Translational Medicine.

[20]  G. Whitesides,et al.  The development of bioresorbable composite polymeric implants with high mechanical strength. , 2018, Nature materials.

[21]  N. Pugno,et al.  Effect of rehabilitation exercise durations on the dynamic bone repair process by coupling polymer scaffold degradation and bone formation , 2017, Biomechanics and Modeling in Mechanobiology.

[22]  D. Lacroix,et al.  µ-Particle tracking velocimetry and computational fluid dynamics study of cell seeding within a 3D porous scaffold. , 2017, Journal of the mechanical behavior of biomedical materials.

[23]  L. Maslov.  Mathematical Model of Bone Regeneration in a Porous Implant , 2017, Mechanics of Composite Materials.

[24]  I. Vlahavas,et al.  Machine Learning and Data Mining Methods in Diabetes Research , 2017, Computational and structural biotechnology journal.

[25]  P Rouch,et al.  Influence of the overall stiffness of a load-bearing porous titanium implant on bone ingrowth in critical-size mandibular bone defects in sheep. , 2016, Journal of the mechanical behavior of biomedical materials.

[26]  Hala Zreiqat,et al.  Design and Fabrication of 3D printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects , 2016, Scientific Reports.

[27]  Aaron Klein,et al.  Efficient and Robust Automated Machine Learning , 2015, NIPS.

[28]  Geoffrey E. Hinton,et al.  Deep Learning , 2015, Nature.

[29]  Mark Taylor,et al.  Four decades of finite element analysis of orthopaedic devices: where are we now and what are the opportunities? , 2015, Journal of biomechanics.

[30]  Wei Li,et al.  Bone’s responses to different designs of implant-supported fixed partial dentures , 2014, Biomechanics and Modeling in Mechanobiology.

[31]  J. Ringe,et al.  Regenerative medicine: Selecting the right biological scaffold for tissue engineering , 2014, Nature Reviews Rheumatology.

[32]  Jasper Snoek,et al.  Practical Bayesian Optimization of Machine Learning Algorithms , 2012, NIPS.

[33]  Shiwei Zhou,et al.  Microstructure design of biodegradable scaffold and its effect on tissue regeneration. , 2011, Biomaterials.

[34]  Georg N Duda,et al.  Inter-species investigation of the mechano-regulation of bone healing: comparison of secondary bone healing in sheep and rat. , 2011, Journal of biomechanics.

[35]  Shiwei Zhou,et al.  Mathematical modeling of degradation for bulk-erosive polymers: applications in tissue engineering scaffolds and drug delivery systems. , 2011, Acta biomaterialia.

[36]  Qing Li,et al.  On stiffness of scaffolds for bone tissue engineering-a numerical study. , 2010, Journal of biomechanics.

[37]  M J Pearcy,et al.  A new approach for assigning bone material properties from CT images into finite element models. , 2010, Journal of biomechanics.

[38]  Qing Li,et al.  Mandibular bone remodeling induced by dental implant. , 2010, Journal of biomechanics.

[39]  Wei Li,et al.  Dental implant induced bone remodeling and associated algorithms. , 2009, Journal of the mechanical behavior of biomedical materials.

[40]  J M García-Aznar,et al.  On scaffold designing for bone regeneration: A computational multiscale approach. , 2009, Acta biomaterialia.

[41]  José Manuel García-Aznar,et al.  Micro–macro numerical modelling of bone regeneration in tissue engineering , 2008 .

[42]  Patrick J. Prendergast,et al.  A Mechanobiological Model for Tissue Differentiation that Includes Angiogenesis: A Lattice-Based Modeling Approach , 2008, Annals of Biomedical Engineering.

[43]  Jason P. Gleghorn,et al.  Microfluidic scaffolds for tissue engineering. , 2007, Nature materials.

[44]  Farshid Guilak,et al.  A biomimetic three-dimensional woven composite scaffold for functional tissue engineering of cartilage. , 2007, Nature materials.

[45]  T. Adachi,et al.  Framework for optimal design of porous scaffold microstructure by computational simulation of bone regeneration. , 2006, Biomaterials.

[46]  P J Prendergast,et al.  Mechano-regulation of stem cell differentiation and tissue regeneration in osteochondral defects. , 2005, Journal of biomechanics.

[47]  S. Hollister.  Porous scaffold design for tissue engineering , 2005, Nature materials.

[48]  A. Meunier,et al.  Tissue-engineered bone regeneration , 2000, Nature Biotechnology.

[49]  L Claes,et al.  Analysis of inter-fragmentary movement as a function of musculoskeletal loading conditions in sheep. , 1997, Journal of biomechanics.

[50]  R. Huiskes,et al.  A biomechanical regulatory model for periprosthetic fibrous-tissue differentiation , 1997, Journal of materials science. Materials in medicine.

[51]  R. Pidaparti,et al.  A uniform strain criterion for trabecular bone adaptation: do continuum-level strain gradients drive adaptation? , 1997, Journal of biomechanics.

[52]  P J Prendergast,et al.  Biophysical stimuli on cells during tissue differentiation at implant interfaces , 1997 .

[53]  A. Göpferich,et al.  Polymer Bulk Erosion , 1997 .

[54]  M.H. Hassoun,et al.  Fundamentals of Artificial Neural Networks , 1996, Proceedings of the IEEE.

[55]  H Weinans,et al.  Effects of material properties of femoral hip components on bone remodeling , 1992, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[56]  N. Kikuchi,et al.  Preprocessing and postprocessing for materials based on the homogenization method with adaptive fini , 1990 .

[57]  G S Beaupré,et al.  An approach for time‐dependent bone modeling and remodeling—theoretical development , 1990, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[58]  Ken-ichi Funahashi,et al.  On the approximate realization of continuous mappings by neural networks , 1989, Neural Networks.

[59]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .

[60]  J. Bourgat.  Numerical experiments of the homogenization method , 1979 .

[61]  A. Freiberg,et al.  WOLFFS LAW AND THE FUNCTIONAL PATHOGENESIS OF DEFORMITY , 1902 .

[62]  K. Pearson.  VII. Note on regression and inheritance in the case of two parents , 1895, Proceedings of the Royal Society of London.