Optimum Design Criteria for Maximum Torque and Efficiency of a Line-Start Permanent-Magnet Motor Using Response Surface Methodology and Finite Element Method

This paper deals with optimum design criteria for maximum torque density and efficiency of a single phase line-start permanent-magnet motor (LSPMM) using response surface methodology (RSM) and finite element method (FEM). The focus of this paper is to find a design solution through the comparison of maximum torque density and efficiency resulting from rotor shape variations. Then, a central composite design (CCD) mixed resolution is introduced, and the motor parameters meeting the required efficiency and maximum torque are determined by the characteristic map obtained by the d-q axis equivalent circuit analysis. Then the geometric shape design satisfying the motor parameters are performed. In the end, the improved LSPMM is fabricated and tested in order to measure the maximum torque and efficiency.

[1]  Hyung-Woo Lee,et al.  A Study on the Optimal Rotor Design of LSPM Considering the Starting Torque and Efficiency , 2009, IEEE Transactions on Magnetics.

[2]  Hyun-Kyo Jung,et al.  Hybrid Optimization Strategy using Response Surface Methodology and Genetic Algorithm for reducing Cogging Torque of SPM , 2011 .

[3]  Hyeong-Seok Kim,et al.  Optimum Design Criteria for Maximum Torque Density and Minimum Torque Ripple of SynRM According to the Rated Wattage Using Response Surface Methodology , 2008, IEEE Transactions on Magnetics.

[4]  Gyu-Hong Kang,et al.  A study on iron loss analysis method considering the harmonics of the flux density waveform using iron loss curves tested on Epstein samples , 2003 .

[5]  Sang-Ho Lee,et al.  Parametric Design for Superconducting Synchronous Motor With 3D Equivalent Magnetic Circuit Network Model , 2007, IEEE Transactions on Applied Superconductivity.

[6]  최윤철,et al.  Optimum Design Criteria for Maximum Torque Density & Minimum Torque Ripple of SynRM according to the Rated Wattage using Response Surface Methodology , 2008 .

[7]  Timothy J. E. Miller.  Single-Phase Permanent-Magnet Motor Analysis , 1985, IEEE Transactions on Industry Applications.

[8]  T. Miller,et al.  Line start permanent magnet motor: single-phase starting performance analysis , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[9]  Jung Ho Lee,et al.  Rotor Design on Torque Ripple Reduction for a Synchronous Reluctance Motor With Concentrated Winding Using Response Surface Methodology , 2006, IEEE Transactions on Magnetics.

[10]  M.A. Jabbar,et al.  Design optimization for cogging torque minimization using response surface methodology , 2004, IEEE Transactions on Magnetics.

[11]  Abdel Ghani Aissaoui,et al.  Parameter Identification of Induction Motors using Variable-weighted Cost Function of Genetic Algorithms , 2010 .

[12]  C. Cossar,et al.  Line-start permanent magnet motor-single-phase steady-state performance analysis , 2003, 38th IAS Annual Meeting on Conference Record of the Industry Applications Conference, 2003..