Daylighting and energy implications due to shading effects from nearby buildings

Daylighting has long been recognized as a potential energy-efficient design strategy for buildings. Natural light can help reduce the electrical demand and the associated sensible cooling load due to artificial lighting. In Hong Kong, however, many buildings are constructed close to each other and hence the external environment plays a significant role in daylighting designs. This paper investigates the shading effects due to nearby obstructions when daylighting schemes are being employed. We used the computer simulation tool, EnergyPlus, to illustrate the energy performance of a generic commercial building with daylighting controls obstructed by neighbouring buildings of various heights. Analysis of electricity savings was carried out for the perimeter zones of the whole building and individual floors. Regression techniques were conducted to correlate the building energy savings and the angles of obstructions. It was found that the shading effects due to nearby obstructions strongly affect the building energy budget when daylighting designs are used. Building designers should critically consider the external environment in order to achieve energy-efficient building designs.

[1]  Danny H.W. Li,et al.  Evaluation of lighting performance in office buildings with daylighting controls , 2001 .

[2]  John A. Ballinger,et al.  Fourier-synthesized weather data for building energy use estimation , 1984 .

[3]  I. Edmonds.  Performance of laser cut light deflecting panels in daylighting applications , 1993 .

[4]  Joseph C. Lam,et al.  Regression analysis of high-rise fully air-conditioned office buildings , 1997 .

[5]  Danny H.W. Li,et al.  Daylighting and its implications to overall thermal transfer value (OTTV) determinations , 2002 .

[6]  Wan Ki Chow,et al.  Parameterization study of the overall thermal-transfer value equation for buildings , 1995 .

[7]  Joseph C. Lam,et al.  Shading effects due to nearby buildings and energy implications , 2000 .

[8]  D. Arasteh,et al.  Glazing energy performance and design optimization with daylighting , 1984 .

[9]  J. C. Lam,et al.  An analysis of daylighting and solar heat for cooling-dominated office buildings , 1999 .

[10]  Danny H.W. Li,et al.  Lighting and energy performance of solar film coating in air-conditioned cellular offices , 2004 .

[11]  Danny H.W. Li,et al.  Electricity use characteristics of purpose-built office buildings in subtropical climates , 2004 .

[12]  Daniel E. Fisher,et al.  ENERGYPLUS: AN UPDATE , 2004 .

[13]  Surapong Chirarattananon,et al.  Daylighting through light pipes in the tropics , 2000 .

[14]  Daniel E. Fisher,et al.  EnergyPlus: creating a new-generation building energy simulation program , 2001 .

[15]  Jean-Louis Scartezzini,et al.  Design and assessment of an anidolic light-duct , 1998 .

[16]  J. C. Lam,et al.  A survey of building envelope designs for commercial buildings in Hong Kong , 1994 .

[17]  Danny H.W. Li,et al.  Daylighting and its effects on peak load determination , 2005 .

[18]  Danny H.W. Li,et al.  A Review of Hong Kong Public Sector Office Building Designs and Energy and Economic Implications , 2000 .

[19]  Wan Ki Chow,et al.  Energy impact of commercial-building envelopes in the sub-tropical climate , 1998 .

[20]  Joseph C. Lam,et al.  Outdoor design conditions for HVAC system design and energy estimation for buildings in Hong Kong , 1995 .

[21]  Anca D. Galasiu,et al.  Impact of window blinds on daylight-linked dimming and automatic on/off lighting controls , 2004 .

[22]  Danny H.W. Li,et al.  Correlation between global solar radiation and its direct and diffuse components , 1996 .

[23]  R. Sullivan,et al.  A Method of Optimizing Solar Control and Daylighting Performance in Commercial Office Buildings , 1992 .

[24]  Wan Ki Chow,et al.  Simulation of energy use for single-compartment buildings in Hong Kong , 1997 .