A particle scale model for municipal solid waste and refuse-derived fuels pyrolysis

Abstract The solid phase decomposition during pyrolysis of municipal solid waste (MSW) and refuse-derived fuels (RDF) is modelled on particle scale accounting for heat and mass transfer. Waste pyrolysis is expressed as a linear combination of pyrolysis of its components. The novel characterization method used expresses waste composition in terms of three reference species. The selected species are a mixture of cellulose and hemicellulose, a mixture of polystyrene and polyethylene terephthalate, and a mixture of polyethylene and polypropylene. The pyrolysis kinetics models for these components are taken from the literature. The fractions of the components in the mixtures are optimized to fit the model to non-isothermal mass loss curves from selected experimental reports. The particle scale model has been evaluated against experimental transient temperature profiles at the centre of a large waste pellet during pyrolysis. The model is able to predict the main trend, but shows a more fluctuating temperature curve.

[1]  Andreas Hornung,et al.  Kinetic study on the thermal degradation of polypropylene and polyethylene , 1999 .

[2]  Hans Schulz,et al.  Classification of Volatile Products from the Temperature-Programmed Pyrolysis of Low- and High-Density Polyethylene , 1998 .

[3]  Aloke Kumar Ghoshal,et al.  Thermal degradation kinetics of poly(ethylene terephthalate) from waste soft drinks bottles , 2005 .

[4]  H. Baum,et al.  Experimental and theoretical investigation of heat and mass transfer processes during wood pyrolysis , 2010 .

[5]  Flavio Manenti,et al.  Kinetic modeling of the thermal degradation and combustion of biomass , 2014 .

[6]  Xiaoqian Ma,et al.  Thermogravimetric analysis of the thermal decomposition of MSW in N2, CO2 and CO2/N2 atmospheres , 2012 .

[7]  Stefania Casu,et al.  Refuse derived fuels pyrolysis , 2005 .

[8]  Bernhard Wunderlich,et al.  The ATHAS database on heat capacities of polymers , 1995 .

[9]  J. Hustad,et al.  Pyrolysis characteristics and kinetics of municipal solid wastes , 2001 .

[10]  Paul J. Dauenhauer,et al.  The role of sample dimension and temperature in cellulose pyrolysis , 2013 .

[11]  Raf Dewil,et al.  Polymeric Cracking of Waste Polyethylene Terephthalate to Chemicals and Energy , 2011, Journal of the Air & Waste Management Association.

[12]  G. Sakellaropoulos,et al.  Pyrolysis kinetics and combustion characteristics of waste recovered fuels , 2009 .

[13]  Gyungmin Choi,et al.  Application of refuse fuels in a direct carbon fuel cell system , 2013 .

[14]  Jürn W. P. Schmelzer,et al.  Heat capacity measurements and modeling of polystyrene glass transition in a wide range of cooling rates , 2015 .

[15]  N. Miskolczi,et al.  Comparision of real waste (MSW and MPW) pyrolysis in batch reactor over different catalysts. Part I: product yields, gas and pyrolysis oil properties. , 2013, Bioresource technology.

[16]  Weihong Yang,et al.  Effect of heat transfer model on the prediction of refuse-derived fuel pyrolysis process , 2015 .

[17]  Alessio Frassoldati,et al.  Pyrolysis of Centimeter-Scale Woody Biomass Particles: Kinetic Modeling and Experimental Validation , 2014 .

[18]  L. Helsen,et al.  Pyrolysis characteristics of excavated waste material processed into refuse derived fuel , 2014 .

[19]  Piero Salatino,et al.  A Thermogravimetric Study of Nonfossil Solid Fuels. 1. Inert Pyrolysis , 2002 .

[20]  İlknur Kayacan,et al.  Pyrolysis of Low and High Density Polyethylene. Part I: Non-isothermal Pyrolysis Kinetics , 2008 .

[21]  Sibel Başakçılardan Kabakcı,et al.  Pyrolysis of olive pomace and copyrolysis of olive pomace with refuse derived fuel , 2014 .