An axisymmetric guided wave encoded system for flood detection of oil rig cross-beams

A novel and completely autonomous guided wave system for flood detection in the hollow cross-beam members of offshore steel oil rigs is presented. Underwater non-destructive testing methods such as ultrasound have been used to inspect for the presence of seawater in these applications, often in conjunction with remote operating vehicles. Alternatively, a monolithic PZT guided wave transducer which can be permanently attached to a sub-sea installation and that can be powered by the action of the seawater is now being developed. Upon activation, the transducer transmits an ultrasound-encoded signal to a receiver, in the form of a real-time digital signal processing system at the surface level. Experiments have been carried out using a jointed steel pipe structure, 10 m in length, 0.5 m in diameter and 16 mm in thickness, completely immersed in seawater. The transmitter was attached to the inner wall of a spur pipe and configured to generate narrow bandwidth, low frequency ultrasonic chirp signals, coupled to the pipe as an axisymmetric mode. Results confirmed that although some attenuation occurs, the system signal processing system successfully identified the signals above the background noise.

[1]  Shin,et al.  Guided waves by axisymmetric and non-axisymmetric surface loading on hollow cylinders , 1999, Ultrasonics.

[2]  M. Lowe,et al.  Defect detection in pipes using guided waves , 1998 .

[3]  Joseph L. Rose,et al.  A guided wave inspection technique for nuclear steam generator tubing , 1994 .

[4]  H. Ermert,et al.  Chirp signal matching and signal power optimization in pulse-echo mode ultrasonic nondestructive testing , 1994, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[5]  D. C. Gazis,et al.  Errata: Three‐Dimensional Investigation of the Propagation of Waves in Hollow Circular Cylinders. II [J. Acoust. Soc. Am. 31, 573–578 (1959)] , 1960 .

[6]  R. Long,et al.  Acoustic wave propagation in buried iron water pipes , 2003, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[7]  Patrick Gaydecki,et al.  Permanently Attached Single PZT Guided Wave Encoded Sensor for Flood Detection of Oil Rig Crossbeams , 2005 .

[8]  Mohamed A. El-Reedy.  Optimization Study For The Offshore Platform Inspection Strategy , 2002 .

[9]  Peter Cawley,et al.  Practical long range guided wave testing: applications to pipes and rails , 2003 .

[10]  Peter Cawley,et al.  Guided waves in fluid-filled pipes surrounded by different fluids , 2001 .

[11]  P. Cawley,et al.  The use of Lamb waves for the long range inspection of large structures , 1996 .

[12]  D. Gazis.  Three‐Dimensional Investigation of the Propagation of Waves in Hollow Circular Cylinders. I. Analytical Foundation , 1959 .

[13]  Paul D. Wilcox,et al.  Lamb and SH wave transducer arrays for the inspection of large areas of thick plates , 2000 .

[14]  Paul D. Wilcox,et al.  An EMAT array for the rapid inspection of large structures using guided waves , 2003 .

[15]  M. Silk,et al.  The propagation in metal tubing of ultrasonic wave modes equivalent to Lamb waves , 1979 .