Microfabricated small metal cantilevers with silicon tip for atomic force microscopy

Atomic force microscopy with small cantilevers is faster due to higher resonant frequencies and has a lower noise level. We report a new process to microfabricate small metal cantilevers with integrated silicon tips. This process is used to fabricate gold cantilevers that are 13-40-/spl mu/m long, 5-10-/spl mu/m wide, and 100-160-nm thick. The tip is first formed at the free end of a sacrificial oxide cantilever. The cantilever layer of the desired metal is then deposited on the nontip side of the sacrificial oxide cantilever. The oxide layer is removed to form the cantilevers with tips on them in a batch process. The highly stressed cantilevers are rapid thermal annealed for 60 s at 300/spl deg/C to relieve the stress. The gold cantilevers have been characterized through their thermal spectra and used to image in tapping mode. The process can be used, not only for gold, but also for any metal or compound that can withstand removal of sacrificial oxide cantilevers.

[1]  T. Yagi,et al.  A new method to fabricate metal tips for scanning probe microscopy , 1997, Proceedings IEEE The Tenth Annual International Workshop on Micro Electro Mechanical Systems. An Investigation of Micro Structures, Sensors, Actuators, Machines and Robots.

[2]  Paul K. Hansma,et al.  Characterization and optimization of the detection sensitivity of an atomic force microscope for small cantilevers , 1998 .

[3]  Deron A. Walters,et al.  Atomic force microscope for small cantilevers , 1997, Photonics West.

[4]  M. Madou.  Fundamentals of microfabrication , 1997 .

[5]  N. Amer,et al.  Optical‐beam‐deflection atomic force microscopy: The NaCl (001) surface , 1990 .

[6]  Gerber,et al.  Atomic Force Microscope , 2020, Definitions.

[7]  T. Ravi,et al.  Oxidation sharpening of silicon tips , 1991 .

[8]  New technique for nanocantilever fabrication based on local electrochemical etching: Applications to scanning force microscopy , 1997 .

[9]  Paul K. Hansma,et al.  Fast imaging and fast force spectroscopy of single biopolymers with a new atomic force microscope designed for small cantilevers , 1999 .

[10]  Ole Hansen,et al.  Fabrication of an all-metal atomic force microscope probe , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[11]  P. Hansma,et al.  A nondestructive method for determining the spring constant of cantilevers for scanning force microscopy , 1993 .

[12]  J. Sader,et al.  Method for the calibration of atomic force microscope cantilevers , 1995 .

[13]  Mohammed Mateen Farooqui,et al.  Silicon sensors with integral tips for atomic force microscopy: a novel single-mask fabrication process , 1993 .

[14]  M. Schmidt,et al.  Microfabrication of oxidation-sharpened silicon tips on silicon nitride cantilevers for atomic force microscopy , 1997 .

[15]  Juergen Brugger,et al.  Silicon cantilevers and tips for scanning force microscopy , 1992 .

[16]  M. Viani,et al.  Small cantilevers for force spectroscopy of single molecules , 1999 .

[17]  Calvin F. Quate,et al.  Microfabrication of cantilever styli for the atomic force microscope , 1990 .

[18]  P. Hansma,et al.  Atomic force microscopy , 1990, Nature.