Improved Virtual Synchronous Generator Control of DFIG to Ride-Through Symmetrical Voltage Fault

This article presents an improved virtual synchronous generator (VSG) control strategy of doubly-fed induction generator (DFIG) during symmetrical voltage fault. Based on VSG control, DFIG can behave like a conventional synchronous generator (SG), which can support frequency and voltage in grid-connected mode. Moreover, when microgrid disconnects from grid, DFIG can provide voltage and power for local loads. However, during symmetrical voltage fault, the transient components in DFIG cannot be controlled properly by VSG. To solve this problem, the air-gap flux feedback is designed in VSG control to accelerate the decay of transient components, and rotor current limiting method is also introduced in the article. In the proposed method, there is no need to switch the control structure or control targets. DFIG always works in the VSG control. Therefore, DFIG can operate in the standalone mode when the connection to grid is cut off. The decay time constant, the voltage control, current limiting control and parameter variation of the improved VSG control are analyzed in detail. Finally, the simulation and experimental results in both normal and fault grid condition are given to validate the effectiveness of proposed VSG control strategy.