Effect of temperature and relative humidity on the development of the compressive strength of surface-layer cement mortar

[1]  Xiaojian Gao,et al.  Influence of silica fume, metakaolin & SBR latex on strength and durability performance of pervious concrete , 2021 .

[2]  Xiaojian Gao,et al.  Thermal and mechanical properties of ultra-high performance concrete incorporated with microencapsulated phase change material , 2020 .

[3]  Xiaojian Gao,et al.  Mechanical performances and microstructures of metakaolin contained UHPC matrix under steam curing conditions , 2020 .

[4]  T. Noguchi,et al.  Prediction of early compressive strength of mortars at different curing temperature and relative humidity by a modified maturity method , 2020, Structural Concrete.

[5]  K. Khayat,et al.  Variations in surface quality of self-consolidation and highly workable concretes with formwork material , 2020 .

[6]  M. H. Nguyen,et al.  Early evaluation of cover concrete quality utilizing water intentional spray tests , 2020 .

[7]  Yimin Tang,et al.  Experimental and theoretical analysis on coupled effect of hydration, temperature and humidity in early-age cement-based materials , 2020 .

[8]  W. Yao,et al.  Coupled effects of carbonation and bio-deposition in concrete surface treatment , 2019, Cement and Concrete Composites.

[9]  Lin Li,et al.  Effect of curing temperature and relative humidity on the hydrates and porosity of calcium sulfoaluminate cement , 2019, Construction and Building Materials.

[10]  Yu Hu,et al.  Maturity model for fracture properties of concrete considering coupling effect of curing temperature and humidity , 2019, Construction and Building Materials.

[11]  Ki-Bong Park,et al.  Analysis of the compressive strength development of concrete considering the interactions between hydration and drying , 2017 .

[12]  Parameshwar N. Hiremath,et al.  Effect of different curing regimes and durations on early strength development of reactive powder concrete , 2017 .

[13]  C. Fu,et al.  Modeling moisture transport at the surface layer of fatigue-damaged concrete , 2017 .

[14]  M. Wyrzykowski,et al.  Effect of relative humidity decrease due to self-desiccation on the hydration kinetics of cement , 2016 .

[15]  Adil Hafidi Alaoui,et al.  Prediction of compressive strength at early age of concrete – Application of maturity , 2016 .

[16]  B. Dong,et al.  Study on water sorptivity of the surface layer of concrete , 2014 .

[17]  Seung Hee Kwon,et al.  Prediction of concrete compressive strength considering humidity and temperature in the construction of nuclear power plants , 2014 .

[18]  Luc Taerwe,et al.  fib model code for concrete structures 2010 , 2013 .

[19]  J. Bullard,et al.  Why alite stops hydrating below 80% relative humidity , 2011 .

[20]  Falk K. Wittel,et al.  Contraction gradient induced microcracking in hardened cement paste , 2011, 1509.04964.

[21]  Samir N. Shoukry,et al.  Effect of Moisture and Temperature on the Mechanical Properties of Concrete , 2011 .

[22]  Takafumi Noguchi,et al.  Effects of simulated environmental conditions on the internal relative humidity and relative moisture content distribution of exposed concrete , 2011 .

[23]  T. Scherer,et al.  Protective or damage promoting effect of calcium carbonate layers on the surface of cement based materials in aqueous environments , 2010 .

[24]  Shaopeng Wu,et al.  Influence of silica fume on the interfacial bond between aggregate and matrix in near-surface layer of concrete , 2009 .

[25]  B. J. Lee,et al.  A humidity-adjusted maturity function for the early age strength prediction of concrete , 2008 .

[26]  Adrian Long,et al.  EFFECT OF RELATIVE HUMIDITY AND AIR PERMEABILITY ON PREDICTION OF THE RATE OF CARBONATION OF CONCRETE , 2001 .

[27]  Husain Al-Khaiat,et al.  Effect of initial curing on early strength and physical properties of a lightweight concrete , 1998 .

[28]  P. F. Hansen,et al.  MATURITY COMPUTER FOR CONTROLLED CURING AND HARDENING OF CONCRETE , 1977 .

[29]  A. G. A. Saul,et al.  Principles underlying the steam curing of concrete at atmospheric pressure , 1951 .