论文信息 - Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process - 字舞流文

Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process

Georg Schlick | Volker Schulze | Alexander Ladewig | Maximilian Fisser | Uwe Glatzel | A. Ladewig | V. Schulze | U. Glatzel | Maximilian Fisser | G. Schlick

[1] R. Hague,et al. Aspects of the Process and Material Relationships in the Selective Laser Melting of Aluminium Alloys , 2015 .

[2] Brent Stucker,et al. The Effects of Processing Parameters on Defect Regularity in Ti-6Al-4V Parts Fabricated by Selective Laser Melting and Electron Beam Melting , 2013 .

[3] M. Gasch. Ein Modell des Lasersintermechanismus von metallischen Pulvern , 2013 .

[4] I. Yadroitsava,et al. Factor analysis of selective laser melting process parameters and geometrical characteristics of synthesized single tracks , 2012 .

[5] Christopher J. Sutcliffe,et al. Gas flow effects on selective laser melting (SLM) manufacturing performance , 2012 .

[6] M. Rethmeier,et al. Vapor–plasma plume investigation during high-power fiber laser welding , 2012 .

[7] T. Kuo,et al. Effects of Different Shielding Gases and Power Waveforms on Penetration Characteristics and Porosity Formation in Laser Welding of Inconel 690 Alloy , 2007 .

[8] John C. Ion,et al. Laser Processing of Engineering Materials: Principles, Procedure and Industrial Application , 2005 .

[9] Fritz Klocke,et al. Untersuchungen zum selektiven Lasersintern von Metallen , 2003 .

[10] W. Meiners,et al. Direktes selektives Laser-Sintern einkomponentiger metallischer Werkstoffe , 1999 .

[11] Peter Berger,et al. The effect of plasma formation on beam focusing in deep penetration welding with CO2 lasers , 1995 .