Robust decentralized fast-output sampling technique based power system stabilizer for a multi-machine power system

Power-system stabilizers (PSSs) are added to excitation systems to enhance the damping during low-frequency oscillations. In this paper, the design of robust decentralized PSS for four machines with a 10-bus system using fast-output sampling feedback is proposed. The nonlinear model of a multimachine system is linearized at different operating points, and 16 linear state space models are obtained. For all of these plants, a common stabilizing state feedback gain, F, is obtained. A robust decentralized fast-output sampling feedback gain which realizes this state feedback gain is obtained using LMI approach. This method does not require all the states of the system for feedback and is easily implementable. This robust decentralized fast-output sampling control is applied to a nonlinear plant model of several machines at different operating (equilibrium) points. This method yields encouraging results for the design of power-system stabilizers.

[1]  Ferber R. Schleif,et al.  Alinement and Modeling of Hanford Excitation Control for System Damping , 1971 .

[2]  M. Aldeen,et al.  Multimachine power system stabiliser design based on new LQR approach , 1995 .

[3]  Yao-nan Yu,et al.  Stabilization and Optimal Control Signals for a Power System , 1971 .

[4]  Herbert Werner.  Multimodel robust control by fast output sampling-an LMI approach , 1998, Proceedings of the 1998 American Control Conference. ACC (IEEE Cat. No.98CH36207).

[5]  E.V. Larsen,et al.  Applying Power System Stabilizers Part II: Performance Objectives and Tuning Concepts , 1981, IEEE Transactions on Power Apparatus and Systems.

[6]  Charles Concordia,et al.  Concepts of Synchronous Machine Stability as Affected by Excitation Control , 1969 .

[7]  Albert B. Chammas,et al.  Pole assignment by piecewise constant output feedback , 1979 .

[8]  E. Larsen,et al.  IEEE Transactions on Power Apparatus and Systems, Vol. PAS-100, No. 6 June 1981 APPLYING POWER SYSTEM STABILIZERS PART I: GENERAL CONCEPTS , 2006 .

[9]  T. L. Huang,et al.  Power system output feedback stabilizer design via optimal subeigenstructure assignment , 1991 .

[10]  Chaouki T. Abdallah,et al.  Static output feedback: a survey , 1994, Proceedings of 1994 33rd IEEE Conference on Decision and Control.

[11]  P. Shrikant Rao,et al.  Robust Pole Placement Stabilizer Design Using Linear Matrix Inequalities , 2004 .

[12]  Y.-N. Yu,et al.  Pole-placement power system stabilizers design of an unstable nine-machine system , 1990 .

[13]  K. R. Padiyar,et al.  Power system dynamics : stability and control , 1996 .

[14]  T. Hillesland,et al.  Power System Stabilizer: Field Testing and Digital Simulation , 1971 .

[15]  Herbert Werner.  Multimodel Robust Control by Fast Output Sampling - An LMI Approach , 1998, Autom..

[16]  E.V. Larsen,et al.  Applying Power System Stabilizers Part III: Practical Considerations , 1981, IEEE Transactions on Power Apparatus and Systems.

[17]  R.J. Fleming,et al.  Selection of Parameters of Stabilizers in Multimachine Power Systems , 1981, IEEE Transactions on Power Apparatus and Systems.

[18]  Ferber R. Schleif,et al.  Control of Rotating Exciters for Power System Damping: Pilot Applications and Experience , 1969 .

[19]  Katsuhisa Furuta,et al.  Simultaneous stabilization based on output measurement , 1995, Kybernetika.

[20]  Yao-nan Yu,et al.  Application of an Optimal Control Theory to a Power System , 1970 .

[21]  Ferber R. Schleif,et al.  Damping for the Northwest - Southwest Tieline Oscillations - An Analog Study , 1966 .

[22]  Ferber R. Schleif,et al.  Damping of System Oscillations with a Hydrogenerating Unit , 1967 .