Experimental Interrogations on Morphologies and Mechanical Delineation of Silicon Nitride Fortified Mg-Al-Zn alloy Composites

[1]  Necip Fazil Yilmaz,et al.  Manufacturing and Characterization of Al–xMg–xMgO Composites Using Stir Casting Process , 2023, International Journal of Metalcasting.

[2]  Shujing Li,et al.  Novel magnesium borate ceramic matrix composites with glass fiber reinforcement , 2022, Ceramics International.

[3]  R. El-sherif,et al.  Effect of pH fluctuations on the biodegradability of nanocomposite Mg-alloy in simulated bodily fluids , 2022, Chemical Papers.

[4]  N. Senthilkumar,et al.  Study on the influence of manganese and silicon carbide in Al7075 metal matrix composite produced by P/M route , 2022, Materials Today: Proceedings.

[5]  N. Sathyanarayana,et al.  Impact of Silicon Carbide Particles Weight Percentage on the Microstructure, Mechanical Behaviour, and Fractography of Al2014 Alloy Composites , 2022, Advances in Materials Science and Engineering.

[6]  Vinayak R. Malik,et al.  Significance of Alloying Elements on the Mechanical Characteristics of Mg-Based Materials for Biomedical Applications , 2022, Crystals.

[7]  F. Cao,et al.  Hardness and corrosion behavior of an Al-2Mn alloy with both microstructural and chemical gradients , 2022, npj Materials Degradation.

[8]  Yi He,et al.  Silicon Nitride Nanoparticles Reinforced the Corrosion Resistance of Ni-Cu Composite Coating in Simulated Seawater Solution , 2022, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[9]  E. Balaji,et al.  Investigation on Mechanical and Wear Properties of ZE43 Magnesium Composites Reinforced with Silicon Nitride by Friction Stir Processing , 2022, Silicon.

[10]  Guoqun Zhao,et al.  Effects of artificial aging on precipitation behavior, mechanical properties and corrosion resistance of Si3N4/6061Al composite fabricated by sintering and hot extrusion processes , 2022, Journal of Materials Processing Technology.

[11]  J. Pradeep Kumar,et al.  Effect of TaC/Ti/Si3N4 Hard Ceramics on Mechanical and Microstructural Behaviour of AA7075 Processed through Stir Casting Process , 2022, Advances in Materials Science and Engineering.

[12]  Song-Jeng Huang,et al.  Effect of SiC Nanoparticles on AZ31 Magnesium Alloy , 2022, Materials.

[13]  M. Stănescu,et al.  A Study of the Mechanical Properties in Composite Materials with a Dammar Based Hybrid Matrix and Reinforcement from Crushed Shells of Sunflower Seeds , 2022, Polymers.

[14]  H. Adarsha,et al.  Microstructure and Nanoindentation response of Si3N4-Reinforced Magnesium-based Composite Synthesized by Powder Metallurgy Route , 2022, Journal of The Institution of Engineers (India): Series D.

[15]  B. Deepanraj,et al.  Abrasive wear and corrosion behavior of hybrid AMMCS reinforced with solid lubricant and ceramic particulates , 2022, RECENT TRENDS IN SCIENCE AND ENGINEERING.

[16]  S. Mandal,et al.  A comprehensive review on biocompatible Mg-based alloys as temporary orthopaedic implants: Current status, challenges, and future prospects , 2021, Journal of Magnesium and Alloys.

[17]  S. Singh,et al.  A review on the corrosion process in magnesium , 2021 .

[18]  R. Heimann.  Silicon Nitride, a Close to Ideal Ceramic Material for Medical Application , 2021, Ceramics.

[19]  G. Goller,et al.  Phase analysis, mechanical properties and in vitro bioactivity of graphene nanoplatelet-reinforced silicon nitride-calcium phosphate composites , 2021 .

[20]  R. Pugazhenthi,et al.  Synthesis and Characterization of Silicon Nitride Reinforced Al–Mg–Zn Alloy Composites , 2021, Metals and Materials International.

[21]  Madeva Nagaral,et al.  Synthesis and mechanical characterization of Si3N4 reinforced copper-tin matrix composites , 2021, Journal of the Mechanical Behavior of Materials.

[22]  O. Popoola,et al.  The Appraisal of the thermal properties, electrical response, and corrosion resistance performance of AA8011 reinforced Nano Si3N4 for automobile application , 2021, Journal of Alloys and Compounds.

[23]  K. Palanikumar,et al.  Implications on the influence of mica on the mechanical properties of cast hybrid (Al+10%B4C+Mica) metal matrix composite , 2020 .

[24]  G. Anbuchezhiyan,et al.  An investigation on microstructure and mechanical behaviour of copper-nickel coated carbon fibre reinforced aluminium composites , 2020, Materials Research Express.

[25]  M. Gupta,et al.  Strengthening and toughening mechanisms of Mg matrix composites reinforced with specific spatial arrangement of in-situ TiB2 nanoparticles , 2020, Composites Part B: Engineering.

[26]  C. K. Dhinakarraj,et al.  Vibration and Damping Behavior of Si3N4 Reinforced Magnesium Alloy Composite for Structural Applications , 2020 .

[27]  K. P. Rao,et al.  Thermomechanical Processing of AZ31-3Ca Alloy Prepared by Disintegrated Melt Deposition (DMD) , 2020, Crystals.

[28]  Z. Ahmad,et al.  Microstructural characterization and evaluation of mechanical properties of silicon nitride reinforced LM 25 composite , 2020 .

[29]  R. Radha,et al.  Mechanical and corrosion behaviour of hydroxyapatite reinforced Mg-Sn alloy composite by squeeze casting for biomedical applications , 2020 .

[30]  Neera Singh,et al.  Formation of fine Mg2Si phase in Mg–Si alloy via solid-state sintering using high energy ball milling , 2020 .

[31]  N. Anand,et al.  Microstructural, mechanical and tribological characterization of vacuum stir cast Mg-4Zn/Si3N4 magnesium matrix nanocomposite , 2020 .

[32]  K. Shin,et al.  Formulation of corrosion rate of magnesium alloys using microstructural parameters , 2020 .

[33]  V. Mohanavel,et al.  Mechanical and Tribological Behavior of Mg-Matrix Composites Manufactured by Stir Casting , 2019, International Journal of Vehicle Structures and Systems.

[34]  G. Kumar,et al.  Assessment of mechanical and tribological characteristics of Silicon Nitride reinforced aluminum metal matrix composites , 2019, Composites Part B: Engineering.

[35]  Zhihua Yang,et al.  Preparation and anisotropic properties of textured structural ceramics: A review , 2019, Journal of Advanced Ceramics.

[36]  E. Koç,et al.  Fabrication and characterization of aluminum hybrid composites reinforced with silicon nitride/graphene nanoplatelet binary particles , 2019, Journal of Composite Materials.

[37]  M. Surappa,et al.  Effects of processing conditions on solidification characteristics and mechanical properties of in situ magnesium metal matrix composites derived from polysilazane precursor , 2019, Journal of Composite Materials.

[38]  F. Ren,et al.  Electrochemical Investigations on AZ Series Magnesium Alloys as Anode Materials in a Sodium Chloride Solution , 2019, Journal of Materials Engineering and Performance.

[39]  Houman Kazemzadeh,et al.  Corrosion behavior and in-vitro bioactivity of porous Mg/Al2O3 and Mg/Si3N4 metal matrix composites fabricated using microwave sintering process , 2019, Materials Chemistry and Physics.

[40]  M. Derradji,et al.  Mechanical and gamma rays shielding properties of a novel fiber-metal laminate based on a basalt/phthalonitrile composite and an Al-Li alloy , 2019, Composite Structures.

[41]  N. Senthilkumar,et al.  Evaluation of mechanical properties of aluminium alloy (LM25) reinforced with fused silica metal matrix composite , 2019 .

[42]  S. Kant,et al.  Porosity Study of Developed Al–Mg–Si/Bauxite Residue Metal Matrix Composite Using Advanced Stir Casting Process , 2018, Arabian Journal for Science and Engineering.

[43]  Anilesh Kumar,et al.  Introduction to magnesium alloy processing technology and development of low-cost stir casting process for magnesium alloy and its composites , 2018, Journal of Magnesium and Alloys.

[44]  Y. Xu,et al.  Properties and characterization of an aluminium–silicon nitride fibre powder metal composite , 2018, SN Applied Sciences.

[45]  S. Sahu,et al.  Corrosion Behavior of ECAP-Processed AM90 Magnesium Alloy , 2018 .

[46]  Xin Lu,et al.  Effects of Porosity on Mechanical Properties and Corrosion Resistances of PM-Fabricated Porous Ti-10Mo Alloy , 2018 .

[47]  J. Kubásek,et al.  AZ31 and WE43 Alloys for Biomedical Applications , 2017 .

[48]  D. Khanduja,et al.  Production and some properties of Si3N4 reinforced aluminium alloy composites , 2015 .

[49]  P. Pieśko,et al.  The Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Aircraft Brackets Produced by a New Forging Technology , 2015 .

[50]  M. Herrmann.  Corrosion of Silicon Nitride Materials in Aqueous Solutions , 2013 .

[51]  F. Riley.  Silicon Nitride and Related Materials , 2004 .

[52]  Manoj Gupta,et al.  Effect of limited matrix–reinforcement interfacial reaction on enhancing the mechanical properties of aluminium–silicon carbide composites , 2001 .