Three-phase current-fed zero current switching phase-shift PWM DC-DC converter

A new topology of current-fed zero current switching (ZCS) three-phase DC-DC converter is proposed in this paper. The converter architecture is composed of a current-fed three-phase three-leg IGBT bridge, three single-phase high frequency transformers with star-connected primary, and three single-phase rectifier bridges with paralleled outputs. Primary IGBTs of the proposed modular phase converter are controlled with constant frequency phase-shift pulse width modulation technique. ZCS for all primary IGBTs is realized using transformer leakage inductance and small auxiliary AC capacitors connected in parallel to secondary side of single-phase transformers. The proposed converter is well-suited for current-fed high voltage alternative energy systems. Interval by interval analysis of steady state operation of the converter is discussed. Digital simulation and experimental test results are presented to investigate the converter design and operation.

[1]  Issa Batarseh,et al.  Full bridge ZCS PWM converter for high-voltage high-power applications , 2002 .

[2]  P. K. Jain,et al.  A Novel ZVZCS Full-Bridge DC/DC Converter Used for Electric Vehicles , 2012, IEEE Transactions on Power Electronics.

[3]  Xu Yang,et al.  Analysis and Design of a High Step-up Current-Fed Multiresonant DC–DC Converter With Low Circulating Energy and Zero-Current Switching for All Active Switches , 2012, IEEE Transactions on Industrial Electronics.

[4]  Jiann-Fuh Chen,et al.  Study and Implementation of a Single-Stage Current-Fed Boost PFC Converter With ZCS for High Voltage Applications , 2008, IEEE Transactions on Power Electronics.

[5]  Fred C. Lee,et al.  New start-up schemes for isolated full-bridge boost converters , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).

[6]  Ivo Barbi,et al.  A ZVS-PWM Three-Phase Current-Fed Push–Pull DC–DC Converter , 2013, IEEE Transactions on Industrial Electronics.

[7]  M. Popat,et al.  A Novel Decoupled Interconnecting Method for Current-Source Converter-Based Offshore Wind Farms , 2012, IEEE Transactions on Power Electronics.

[8]  A. K. Rathore,et al.  Novel Interleaved Bidirectional Snubberless Soft-Switching Current-Fed Full-Bridge Voltage Doubler for Fuel-Cell Vehicles , 2013, IEEE Transactions on Power Electronics.

[9]  Akshay Kumar Rathore,et al.  Extended Range ZVS Active-Clamped Current-Fed Full-Bridge Isolated DC/DC Converter for Fuel Cell Applications: Analysis, Design, and Experimental Results , 2013, IEEE Transactions on Industrial Electronics.

[10]  Ali Davoudi,et al.  Automated system identification and controller tuning for digitally controlled dc-dc converters , 2012 .

[11]  G. Moschopoulos,et al.  A Comparative Study of a New ZCS DC–DC Full-Bridge Boost Converter With a ZVS Active-Clamp Converter , 2012, IEEE Transactions on Power Electronics.

[12]  Michael A. E. Andersen,et al.  High-Efficiency Isolated Boost DC–DC Converter for High-Power Low-Voltage Fuel-Cell Applications , 2010, IEEE Transactions on Industrial Electronics.

[13]  Dehong Xu,et al.  Current-fed DC/DC converter with reverse block IGBT for fuel cell distributing power system , 2005, Fourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005..

[14]  Jung-Min Kwon,et al.  High-Efficiency Fuel Cell Power Conditioning System With Input Current Ripple Reduction , 2009, IEEE Transactions on Industrial Electronics.

[15]  A.M. Khambadkone,et al.  Analysis and Implementation of a High Efficiency, Interleaved Current-Fed Full Bridge Converter for Fuel Cell System , 2007, IEEE Transactions on Power Electronics.

[16]  P. Thounthong,et al.  Fuel cell high-power applications , 2009, IEEE Industrial Electronics Magazine.

[17]  Leila Parsa,et al.  Interleaved multi-phase ZCS isolated DC-DC converter for sub-sea power distribution , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[18]  Drazen Dujic,et al.  Characterization of 6.5 kV IGBTs for High-Power Medium-Frequency Soft-Switched Applications , 2014, IEEE Transactions on Power Electronics.