Indentation damage detection in glass/epoxy composite laminates with electrically tailored conductive nanofiller

Laminated fiber-reinforced polymer composites are known for excellent in-plane strength and stiffness per unit density, but variable susceptibility to out-of-plane impact and indentation loading on account of their relatively low interlaminar strength. Methods of monitoring damage caused by out-of-plane loads are therefore sought. This investigation aims to demonstrate the two-dimensional electrical resistance mapping method using co-cured carbon fiber electrodes, a glass fiber-reinforced composite system, and electrically tailored carbon black filler networks for sensing indentation damage. It is shown that damage sensing accuracy is improved by increasing the electrical conductivity of the carbon black network in the through-thickness direction. The anisotropic tailoring of conductivity is accomplished by using alternating-current dielectrophoresis, which entails the application of an electric field to polarize and chain the carbon black particles preferentially through the thickness during liquid processing of the composite. Co-cured carbon fiber tows arranged in a perpendicular array on the top and bottom surfaces of the laminate provide a qualitative assessment of the size and severity of the indentation damage via a two-dimensional resistance change map.

[1]  Karl Schulte,et al.  Non-destructive testing of FRP by d.c. and a.c. electrical methods , 2001 .

[2]  Dong Wang,et al.  Assessment of transverse impact damage in GF/EP laminates of conductive nanoparticles using electrical resistivity tomography , 2012 .

[3]  Daniel J. Inman,et al.  Frequency Range Selection for Impedance-Based Structural Health Monitoring , 2007 .

[4]  A. Naghashpour,et al.  A technique for real-time detection, location and quantification of damage in large polymer composite structures made of electrically non-conductive fibers and carbon nanotube networks , 2013, Nanotechnology.

[5]  Anand Asundi,et al.  Structural health monitoring of smart composite materials by using EFPI and FBG sensors , 2003 .

[6]  Akira Todoroki,et al.  Multi-prove electric potential change method for delamination monitoring of graphite/epoxy composite plates using normalized response surfaces , 2004 .

[7]  Karl Schulte,et al.  Load and failure analyses of CFRP laminates by means of electrical resistivity measurements , 1989 .

[8]  Marino Quaresimin,et al.  Glass-fibre-reinforced composites with enhanced mechanical and electrical properties – Benefits and limitations of a nanoparticle modified matrix , 2006 .

[9]  A. Skordos,et al.  The use of an electric field in the preparation of glass fibre/epoxy composites containing carbon nanotubes , 2012 .

[10]  M. Miyayama,et al.  Foreseeing of Fracture in CFGFRP Composites by the Measurement of Residual Change in Electrical Resistance , 1992 .

[11]  Anindya Ghoshal,et al.  Initial evaluation of an active/passive structural neural system for health monitoring of composite materials , 2006 .

[12]  K. W. Wang,et al.  Enhanced health monitoring of fibrous composites with aligned carbon nanotube networks and electrical impedance tomography , 2012, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[13]  Suli Wang,et al.  Effect of carbon black additive in Pt black cathode catalyst layer on direct methanol fuel cell performance , 2010 .

[14]  Karl Schulte,et al.  Load and health monitoring in glass fibre reinforced composites with an electrically conductive nanocomposite epoxy matrix , 2008 .

[15]  Shiv P. Joshi,et al.  Damage detection in CFRP by electrical conductivity mapping , 2001 .

[16]  Karl Schulte,et al.  Damage mapping of GFRP via electrical resistance measurements using nanocomposite epoxy matrix systems , 2014 .

[17]  Jaycee H. Chung,et al.  Sensitivity of the two-dimensional electric potential/resistance method for damage monitoring in carbon fiber polymer-matrix composite , 2006 .

[18]  K. Loh,et al.  Evaluation of the Damage Detection Characteristics of Electrical Impedance Tomography , 2013 .

[19]  Damage Detection , 2003, Science's STKE.

[20]  T. Chou,et al.  Carbon Nanotube Networks: Sensing of Distributed Strain and Damage for Life Prediction and Self Healing , 2006 .

[21]  Charles E. Bakis,et al.  Anisotropic networking of carbon black in glass/epoxy composites using electric field , 2015 .