Influence of ship motion on the aeroelastic response of a Froude-scaled maritime rotor system

Abstract The influence of representative ship motion in various sea states on the aeroelastic response of a Froude-scaled, flap articulated, maritime rotor system is experimentally and numerically investigated. The design and construction of the rotor system are briefly presented. The rotor system was attached to a 6 degrees-of-freedom (6DOF) Stewart motion platform, which was programmed to produce Froude-scaled ship motion representative of a generic frigate. The experimental setup and runs are described and discussed. From the experimental and numerical results, it is demonstrated that in the absence of a ship airwake, certain combinations of ship roll/pitch frequencies and rotor hub frequencies are capable of producing elastic rotor tip displacements outside the acceptable safe operating range resulting in the possibility of tunnel or tail strikes. The experimental aeroelastic response of the rotor system throughout its operation envelope on a Froude-scaled moving ship is used to validate two geometrically exact multibody dynamics models of maritime rotors, which proves their validity for studying the problem of Helicopter Ship Dynamic Interface (HSDI). The relevance of this investigation and planned future investigations to the projected increase in maritime operation of rotorcraft is also discussed.

[1]  S Newman,et al.  The phenomenon of helicopter rotor blade sailing , 1999 .

[2]  Lyle N. Long,et al.  Computational Fluid Dynamics Simulations of Ship Airwake , 2005 .

[3]  Simon Newman.  The safety of shipborne helicopter operation , 2004 .

[4]  Ronald L. Huston,et al.  Computer methods in flexible multibody dynamics , 1991 .

[5]  Carlo L. Bottasso,et al.  An Attempt at the Classification of Energy Decaying Schemes for Structural and Multibody Dynamics , 2004 .

[6]  Hao,et al.  Modeling and Simulation of Rotor Engagement and Disengagement During Shipboard Operations , 2004 .

[7]  Edward C. Smith,et al.  Validation and Application of a Transient Aeroelastic Analysis for Shipboard Engage/Disengage Operations. , 1996 .

[8]  D. Hodges.  A mixed variational formulation based on exact intrinsic equations for dynamics of moving beams , 1990 .

[9]  Edward C. Smith,et al.  Aeroelastic Analysis of Transient Blade Dynamics During Shipboard Engage/Disengage Operations , 1998 .

[10]  Peretz P. Friedmann,et al.  Aeroelastic scaling for rotary-wing aircraft with applications , 2004 .

[11]  F. Khouli.  Modelling and attenuation feasibility of the aeroelastic response of active helicopter rotor systems during the engagement/disengagement phase of maritime operation , 2009 .

[12]  Fred F. Afagh,et al.  Application of the First Order Generalized-α Method to the Solution of an Intrinsic Geometrically Exact Model of Rotor Blade Systems , 2009 .

[13]  Steven,et al.  Modelling Helicopter Blade Sailing: Model Validation Using Experimental Data , 2008 .

[14]  Dewey H. Hodges,et al.  Geometrically Exact, Intrinsic Theory for Dynamics of Curved and Twisted Anisotropic Beams , 2004 .

[15]  Alanna Wall,et al.  A discrete approach to modelling helicopter blade sailing , 2009 .

[16]  R. G. Langlois,et al.  A TUTORIAL PRESENTATION OF ALTERNATIVE SOLUTIONS TO THE FLEXIBLE BEAM ON RIGID CART PROBLEM , 2005 .