Using PQ Monitoring and Substation Relays for Fault Location on Distribution Systems

Fault location is of considerable interest for utilities to improve their reliability and speed storm restorations. Power quality recorders, relays, and other monitors can provide information to help locate faults. In this paper, some basic impedance-based fault-location methods are evaluated on utility measurement data with known fault locations. The main finding is that reasonably accurate fault locations are possible on a wide range of distribution circuits with either feeder-level or bus-level substation monitoring. Another important finding described is how monitoring can be used to estimate the parameters of the fault arc. This can improve fault locations and help with accident investigations, equipment failure forensics, and other hazards related to the power and energy created by the arc

[1]  J. Burke,et al.  Characteristics of Fault Currents on Distribution Systems , 1984, IEEE Transactions on Power Apparatus and Systems.

[2]  Z.M. Radojevic,et al.  Numerical algorithm for fault distance calculation and blocking unsuccessful reclosing onto permanent faults , 2005, IEEE Power Engineering Society General Meeting, 2005.

[3]  D. Costello,et al.  Impedance-Based Fault Location Experience , 2006, 2006 IEEE Rural Electric Power Conference.

[4]  Vladimir Terzija,et al.  Numerical algorithm for overhead lines arcing faults detection and distance and directional protection , 2000 .

[5]  Murari Mohan Saha,et al.  An Accurate Fault Locator with Compensation for Apparent Reactance in the Fault Resistance Resulting from Remote-End Infeed , 1985, IEEE Power Engineering Review.

[6]  M. S. Sachdev,et al.  A technique for estimating transmission line fault locations from digital impedance relay measurements , 1988 .

[7]  G.C. Lampley,et al.  Estimation of Fault Location on Distribution Feeders using PQ Monitoring Data , 2007, 2007 IEEE Power Engineering Society General Meeting.

[8]  M.E. Baran,et al.  A classifier for distribution feeder overcurrent analysis , 2006, IEEE Transactions on Power Delivery.

[9]  Surya Santoso,et al.  Distance estimation technique for single line-to-ground faults in a radial distribution system , 2000, 2000 IEEE Power Engineering Society Winter Meeting. Conference Proceedings (Cat. No.00CH37077).

[10]  Z.M. Radojevic,et al.  A novel approach to the distance protection, fault location and arcing faults recognition , 2004, IEEE PES Power Systems Conference and Exposition, 2004..

[11]  G. C. Lampley.  Fault detection and location on electrical distribution system , 2002, 2002 Rural Electric Power Conference. Papers Presented at the 46th Annual Conference (Cat. No. 02CH37360).

[12]  T. Takagi,et al.  Development of a New Type Fault Locator Using the One-Terminal Voltage and Current Data , 1982, IEEE Power Engineering Review.

[13]  G. S. Peele.  Using monitoring to improve the utility system , 2001, 2001 Power Engineering Society Summer Meeting. Conference Proceedings (Cat. No.01CH37262).

[14]  A. Sundaram,et al.  RMS voltage variation statistical analysis for a survey of distribution system power quality performance , 1999, IEEE Power Engineering Society. 1999 Winter Meeting (Cat. No.99CH36233).

[15]  Adly A. Girgis,et al.  A fault location technique for rural distribution feeders , 1991, [Proceedings] 1991 Rural Electric Power Conference. Papers presented at the 35th Annual Conference.