On the Development of a Chip Breaker in a Metal-Matrix Polycrystalline Diamond Insert: Finite Element Based Design With ns-Laser Ablation and Machining Verification

[1]  C. Brecher,et al.  Laser Roughing of PCD , 2014 .

[2]  O. Gonzalo,et al.  FEM Based Design of a Chip Breaker for the Machining with PCD Tools , 2011 .

[3]  Wegener Konrad,et al.  Laser Prepared Cutting Tools , 2012 .

[4]  Sang Jo Lee,et al.  Efficient Chip Breaker Design by Predicting the Chip Breaking Performance , 2001 .

[5]  J. Billingham,et al.  Continuous trench, pulsed laser ablation for micro-machining applications , 2016 .

[6]  Fritz Klocke,et al.  3D FEM simulation of chip breakage in metal cutting , 2016 .

[7]  K. Jefimovs,et al.  Characterisation of thermal influences after laser processing polycrystalline diamond composites using long to ultrashort pulse durations , 2015 .

[8]  P Sreekala,et al.  A METHODOLOGY FOR CHIP BREAKER DESIGN AT LOW FEED TURNING OF ALLOY STEEL USING FINITE ELEMENT MODELING METHODS , 2012 .

[9]  K. Wegener,et al.  Ablation Study of WC and PCD Composites Using 10 Picosecond and 1 Nanosecond Pulse Durations at Green and Infrared Wavelengths , 2014 .

[10]  V. Konov,et al.  Effects of pulse duration in laser processing of diamond-like carbon films , 2005 .

[11]  Christian Brecher,et al.  Finishing of polycrystalline diamond tools by combining laser ablation with grinding , 2013, Production Engineering.

[12]  Li Zhou,et al.  Development of web-based machining chip breaking prediction systems , 2003 .

[13]  T. Okuchi,et al.  Pulsed laser processing of nano-polycrystalline diamond: A comparative study with single crystal diamond , 2009 .

[14]  Michael McDonald,et al.  Fundamentals of Modern Manufacturing: Materials, Processes and Systems , 2016 .

[15]  Peter J. Heath,et al.  Developments in applications of PCD tooling , 2001 .

[16]  Mohammad Lotfi,et al.  The effect of chip breaker geometry on chip shape, bending moment, and cutting force: FE analysis and experimental study , 2015 .

[17]  Abdullah Kurt,et al.  Investigation of the effects of different chip breaker forms on the cutting forces using artificial neural networks , 2012 .

[18]  I. S. Jawahir,et al.  On the Controllability of Chip Breaking Cycles and Modes of Chip Breaking in Metal Machining , 1990 .

[19]  J. Mahashar Ali,et al.  Influence of chip breaker location and angle on chip form in turning low carbon steel , 2009 .

[20]  Jae-Hyung Sim,et al.  Performance evaluation of chip breaker utilizing neural network , 2009 .

[21]  Konrad Wegener,et al.  Comparison of Ground and Laser Machined Polycrystalline Diamond (PCD) Tools in Cutting Carbon Fiber Reinforced Plastics (CFRP) for Aircraft Structures , 2012 .