A review of digital manufacturing-based hybrid additive manufacturing processes

From Germany’s Industry 4.0 mission to Made in China 2025 and Make in India mission to British Factory of the Future in 2050, digital manufacturing (DM) is promoting in the world’s major industrial countries as a technology foundation of the future manufacturing. At the same time, in the different segments of the DM realm, different forms of information technologies (IT) are flourishing such as the following: computer-aided manufacturing, robotics control in manufacturing, and process simulation. This paper is aimed to review the latest initiatives of DM in the leading universities and major industrial countries. Along with, a critical literature review of various initiatives in the area of DM-assisted hybrid additive manufacturing (DM-HAM) has also been carried out. DM-HAM seems to be very promising for next generation multi-operational manufacturing as it is time saving and economical. The highlights of this review will provide a guide for the upcoming research activities in the area of DM-HAM.

[1]  Paul Witherell,et al.  Additive Manufacturing: A Trans-disciplinary Experience , 2017 .

[2]  Dazhong Wu,et al.  TOWARDS A CLOUD-BASED DESIGN AND MANUFACTURING PARADIGM: LOOKING BACKWARD, LOOKING FORWARD , 2012 .

[3]  S. H. Choi,et al.  A virtual prototyping system for rapid product development , 2004, Comput. Aided Des..

[4]  Judy M. Vance,et al.  Coupling of interactive manufacturing operations simulation and immersive virtual reality , 2010, Virtual Reality.

[5]  Mika Liukkonen,et al.  Toward decentralized intelligence in manufacturing: recent trends in automatic identification of things , 2016 .

[6]  Lin Zhang,et al.  Development of a Collaborative 3D Virtual Monitoring System through Integration of Cloud Computing and Multiagent Technology , 2015 .

[7]  Songhao Wang,et al.  Digital denture manufacturing-An integrated technologies of abrasive computer tomography, CNC machining and rapid prototyping , 2006 .

[8]  Berend Denkena,et al.  Knowledge Management in Process Planning , 2007 .

[9]  Colm Connaughton,et al.  Hybrid additive manufacturing of 3D electronic systems , 2016 .

[10]  Stefan Bornhofen,et al.  3D Interaction in Virtual Environments for Systems Engineering , 2016 .

[11]  Engelbert Westkämper,et al.  Strategic development of factories under the influence of emergent technologies , 2007 .

[12]  Y. Song,et al.  Experimental investigations into rapid prototyping of composites by novel hybrid deposition process , 2006 .

[13]  Dimitris Mourtzis,et al.  Digital manufacturing: History, perspectives, and outlook , 2009 .

[14]  Drakoulis Martakos,et al.  Supplier selection in electronic marketplaces using satisficing and fuzzy AHP , 2010, Expert Syst. Appl..

[15]  Alain Bernard,et al.  Weld bead modeling and process optimization in Hybrid Layered Manufacturing , 2011, Comput. Aided Des..

[16]  Harry Bikas,et al.  Additive manufacturing methods and modelling approaches: a critical review , 2015, The International Journal of Advanced Manufacturing Technology.

[17]  Ralph R. Martin,et al.  Algorithms for reverse engineering boundary representation models , 2001, Comput. Aided Des..

[18]  David Upton,et al.  A Flexible Structure for Computer-Controlled Manufacturing Systems , 1992 .

[19]  Vincent Cheng-Siong Lee,et al.  A new multi-agent system framework for tacit knowledge management in manufacturing supply chains , 2009, J. Intell. Manuf..

[20]  Ian Gibson,et al.  Curved Layer Fused Deposition Modeling in Conductive Polymer Additive Manufacturing , 2011 .

[21]  Rivka Oxman,et al.  Materializing design: the implications of rapid prototyping in digital design , 2006 .

[22]  David Taylor,et al.  Supply Chains: A Manager's Guide , 2003 .

[23]  Sunpreet Singh,et al.  Material issues in additive manufacturing: A review , 2017 .

[24]  T. Srivatsan,et al.  Additive Manufacturing of Materials: Viable Techniques, Metals, Advances, Advantages, and Applications , 2015 .

[25]  Gianluca Spina,et al.  Advanced manufacturing technologies and strategically flexible production , 2000 .

[26]  Soundar R. T. Kumara,et al.  An agent-based recommender system for developing customized families of products , 2009, J. Intell. Manuf..

[27]  Peter Fox,et al.  Developing Ontologies and Web-based Data Management System for Additive Manufacturing Processes , 2017, WebSci.

[28]  Xiaobo Peng,et al.  Haptic Interface Technique in Large-Scale Virtual Environment , 2014 .

[29]  Rodrigo Pérez Fernández,et al.  Virtual Reality in a shipbuilding environment , 2015, Adv. Eng. Softw..

[30]  Lei Ren,et al.  Architecture of Hybrid Cloud for Manufacturing Enterprise , 2012 .

[31]  S M Giannitelli,et al.  Combined additive manufacturing approaches in tissue engineering. , 2015, Acta biomaterialia.

[32]  J. Jeng,et al.  Mold fabrication and modification using hybrid processes of selective laser cladding and milling , 2001 .

[33]  Vasilis Kostakis,et al.  Commons-based peer production and digital fabrication: The case of a RepRap-based, Lego-built 3D printing-milling machine , 2014, Telematics Informatics.

[34]  Suphunnika Ibbotson,et al.  Direct digital manufacturing: definition, evolution, and sustainability implications , 2015 .

[35]  Fabio Nonino,et al.  Impact of additive manufacturing on business competitiveness: a multiple case study , 2017 .

[36]  K. P. Karunakaran,et al.  Low cost integration of additive and subtractive processes for hybrid layered manufacturing , 2010 .

[37]  Andrés Díaz Lantada,et al.  Rapid prototyping of multi-scale biomedical microdevices by combining additive manufacturing technologies , 2014, Biomedical microdevices.

[38]  Eckhard Beyer,et al.  Integrated laser cell for combined laser cladding and milling , 2010 .

[39]  P. V. M. Rao,et al.  Computer Aided Design and Manufacturing , 2014 .

[40]  Jay Lee,et al.  Recent advances and trends in predictive manufacturing systems in big data environment , 2013 .

[41]  Vimal Dhokia,et al.  Process planning for additive and subtractive manufacturing technologies , 2015 .

[42]  Jay Lee.  Smart Factory Systems , 2015, Informatik-Spektrum.

[43]  Thomas Reuding,et al.  Predictive Value of Assessing Vehicle Interior Design Ergonomics in a Virtual Environment , 2004, J. Comput. Inf. Sci. Eng..

[44]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[45]  Ross J. Friel,et al.  Ultrasonic Additive Manufacturing – A Hybrid Production Process for Novel Functional Products , 2013 .

[46]  Dominic Cuiuri,et al.  A tool-path generation strategy for wire and arc additive manufacturing , 2014, The International Journal of Advanced Manufacturing Technology.

[47]  Christian Kreiner,et al.  Integrated design for tackling safety and security challenges of smart products and digital manufacturing , 2017 .

[48]  Jay Lee,et al.  A Cyber-Physical Systems architecture for Industry 4.0-based manufacturing systems , 2015 .

[49]  C. R. Ramakrishnan,et al.  Modeling and analysis of interactions in virtual enterprises , 1999, Proceedings Ninth International Workshop on Research Issues on Data Engineering: Information Technology for Virtual Enterprises. RIDE-VE'99.

[50]  Michele Lanzetta,et al.  Shape deposition manufacturing of biologically inspired hierarchical microstructures , 2008 .

[51]  Philippe Fuchs,et al.  Virtual Reality: Concepts and Technologies , 2011 .

[52]  Jean-Yves Hascoët,et al.  A new DFM approach to combine machining and additive manufacturing , 2011, ArXiv.

[53]  Frank W. Liou,et al.  Three Dimensional Die Repair Using a Hybrid Manufacturing System , 2006 .

[54]  Pascal Mognol,et al.  A first approach to choose between HSM, EDM and DMLS processes in hybrid rapid tooling , 2007 .

[55]  Antonio Jimeno,et al.  State of the art of the virtual reality applied to design and manufacturing processes , 2007 .

[56]  Ming C. Lin.  EIC Farewell and New EIC Introduction , 2015, IEEE Trans. Vis. Comput. Graph..

[57]  Engelbert Westkämper,et al.  Digital Manufacturing In The Global Era , 2007 .

[58]  Manfred Walter,et al.  Rapid manufacturing in the spare parts supply chain: Alternative approaches to capacity deployment , 2010 .

[59]  Jerry Y. H. Fuh,et al.  Product lifecycle modelling, analysis and management , 2008, Comput. Ind..

[60]  Ang Jin.  Implementing Internet/ Web- Based Rapid Prototyping Tele- Manufacturing Service , 2000 .

[61]  H. Van Dyke Parunak,et al.  The RAPPID Project: Symbiosis between Industrial Requirements and MAS Research , 1999, Autonomous Agents and Multi-Agent Systems.

[62]  Ming-Chuan Leu,et al.  Progress in Additive Manufacturing and Rapid Prototyping , 1998 .

[63]  R. Hague *,et al.  Material and design considerations for rapid manufacturing , 2004 .

[64]  Yong Huang,et al.  Additive Manufacturing: Current State, Future Potential, Gaps and Needs, and Recommendations , 2015 .

[65]  Ian Gibson,et al.  Additive manufacturing technologies : 3D printing, rapid prototyping, and direct digital manufacturing , 2015 .

[66]  K.K.B. Hon,et al.  Optimising build parameters for improved surface finish in stereolithography , 1998 .

[67]  K. Osakada,et al.  Rapid Manufacturing of Metal Components by Laser Forming , 2006 .

[68]  A. Rubenchik,et al.  Laser powder-bed fusion additive manufacturing: Physics of complex melt flow and formation mechanisms of pores, spatter, and denudation zones , 2015, 1512.02593.

[69]  Dazhong Wu,et al.  Enhancing the Product Realization Process With Cloud-Based Design and Manufacturing Systems , 2013, J. Comput. Inf. Sci. Eng..

[70]  Mohsen Seifi,et al.  Metal Additive Manufacturing: A Review of Mechanical Properties , 2016 .

[71]  Ralph R. Martin,et al.  Reverse engineering of geometric models - an introduction , 1997, Comput. Aided Des..

[72]  W. D. Li,et al.  An adaptive process planning approach of rapid prototyping and manufacturing , 2013 .

[73]  Hongbo Lan,et al.  Web-based rapid prototyping and manufacturing systems: A review , 2009, Comput. Ind..

[74]  Roger Frost,et al.  International Organization for Standardization (ISO) , 2004 .

[75]  Stanley A. Brown.  Customer Relationship Management: A Strategic Imperative in the World of e-Business , 1999 .

[76]  Shuichi Fukuda,et al.  TeleRP - an Internet web-based solution for remote rapid prototyping service and maintenance , 2001, Int. J. Comput. Integr. Manuf..

[77]  Bahattin Koc,et al.  Geometric algorithms for rapidly reconfigurable mold manufacturing of free-form objects , 2005, Comput. Aided Des..

[78]  Judy M. Vance,et al.  Virtual Training: Learning Transfer of Assembly Tasks , 2015, IEEE Transactions on Visualization and Computer Graphics.

[79]  R. Merz,et al.  Shape Deposition Manufacturing , 1994 .

[80]  Zhang Lin,et al.  Further discussion on cloud manufacturing , 2011 .

[81]  K. P. Karunakaran,et al.  Retrofitment of a CNC machine for hybrid layered manufacturing , 2009 .

[82]  Jun Hong,et al.  Development of a teleservice system for RP service bureaus , 2005 .

[83]  Bharat Bhushan,et al.  An overview of additive manufacturing (3D printing) for microfabrication , 2017 .

[84]  Camelia Chira,et al.  An agent-based approach to knowledge management in distributed design , 2006, J. Intell. Manuf..

[85]  Zude Zhou,et al.  Fundamentals of Digital Manufacturing Science , 2011 .

[86]  Cheng-Tao Wang,et al.  Digital manufacture of titanium prosthesis for cranioplasty , 2006 .

[87]  Frank W. Liou,et al.  Automatic Process Planning and Toolpath Generation of a Multiaxis Hybrid Manufacturing System , 2005 .

[88]  K. P. Karunakaran,et al.  Hybrid adaptive layer manufacturing: An Intelligent art of direct metal rapid tooling process , 2006 .

[89]  Enver Yücesan,et al.  The impact of ERP on supply chain management: Exploratory findings from a European Delphi study , 2003, Eur. J. Oper. Res..

[90]  Daniel A. Finke,et al.  Discrete simulation development for a proposed shipyard steel processing facility , 2001, Proceeding of the 2001 Winter Simulation Conference (Cat. No.01CH37304).

[91]  Aydin Nassehi,et al.  A review of hybrid manufacturing processes – state of the art and future perspectives , 2013, Int. J. Comput. Integr. Manuf..

[92]  Cecil Armstrong,et al.  Optimization of Aircraft Fuselage Assembly Process Using Digital Manufacturing , 2007, J. Comput. Inf. Sci. Eng..

[93]  David W. Rosen,et al.  A Brief History of Additive Manufacturing and the 2009 Roadmap for Additive Manufacturing: Looking Back and Looking Ahead , 2009 .

[94]  Paul G. Ranky.  A real‐time manufacturing/assembly system performance evaluation and control model with integrated sensory feedback processing and visualization , 2004 .

[95]  Wei Sun,et al.  Direct slicing of STEP based NURBS models for layered manufacturing , 2005, Comput. Aided Des..

[96]  Shalin Hai-Jew.  Virtual Immersive and 3D Learning Spaces: Emerging Technologies and Trends , 2010 .

[97]  Kaufui Wong,et al.  A Review of Additive Manufacturing , 2012 .

[98]  Wang Guilan,et al.  Hybrid plasma deposition and milling for an aeroengine double helix integral impeller made of superalloy , 2010 .

[99]  A. Erman Tekkaya,et al.  Hybrid processes in manufacturing , 2014 .

[100]  Lei Ren,et al.  Cloud manufacturing: key characteristics and applications , 2017, Int. J. Comput. Integr. Manuf..

[101]  R. P. Jones,et al.  A good practice model for implementation of computer-aided engineering analysis in product development , 2003 .

[102]  Ren C. Luo,et al.  Desktop rapid prototyping system with supervisory control and monitoring through Internet , 2001 .

[103]  Frank W. Liou,et al.  Integrated Process Planning for a Multiaxis Hybrid Manufacturing System , 2010 .

[104]  Bo-Sung Shin,et al.  Development of a direct metal freeform fabrication technique using CO2 laser welding and milling technology , 2001 .

[105]  D. Zhu,et al.  Abrasive Polishing Assisted Nickel Electroforming Process , 2006 .

[106]  Choon Seong Leem,et al.  PDM and ERP integration methodology using digital manufacturing to support global manufacturing , 2011 .

[107]  Jun Hong,et al.  An integrated manufacturing system for rapid tooling based on rapid prototyping , 2004 .

[108]  Dieter Roller,et al.  3D Printing Process Pipeline on the Internet , 2016, ZEUS.

[109]  Vimal Dhokia,et al.  Application of a hybrid process for high precision manufacture of difficult to machine prismatic parts , 2014 .

[110]  Daniel Roy Eyers,et al.  E-commerce channels for additive manufacturing: an exploratory study , 2015 .

[111]  Botond Kádár,et al.  Towards adaptive and digital manufacturing , 2010, Annu. Rev. Control..

[112]  Hasse Nylund,et al.  Digital Virtual Holons — An Approach to Digital Manufacturing Systems , 2008 .

[113]  C. E. Duty,et al.  Direct digital additive manufacturing technologies: Path towards hybrid integration , 2012, 2012 Future of Instrumentation International Workshop (FIIW) Proceedings.

[114]  A. G. Cooper,et al.  Automated fabrication of complex molded parts using Mold Shape Deposition Manufacturing , 1999 .

[115]  Lalit Patil,et al.  Digital manufacturing market: a semantic web-based framework for agile supply chain deployment , 2010, Journal of Intelligent Manufacturing.

[116]  Kim Cheng Tan,et al.  Distributed rapid prototyping – a framework for Internet prototyping and manufacturing , 2001 .

[117]  Zahir Irani,et al.  Enhancing simulation software for use in manufacturing , 2000 .

[118]  Thomas R. Kramer,et al.  A feature-based inspection and machining system , 2001, Comput. Aided Des..

[119]  Pulak M. Pandey,et al.  Advances in 3D Printing & Additive Manufacturing Technologies , 2017 .

[120]  Ajay Kumar,et al.  Cloud computing - An emerging trend in information technology , 2014, 2014 International Conference on Issues and Challenges in Intelligent Computing Techniques (ICICT).

[121]  Dazhong Wu,et al.  Cloud-based design and manufacturing: A new paradigm in digital manufacturing and design innovation , 2015, Comput. Aided Des..

[122]  Yanping Gao,et al.  Vrps-I: an Internet-Based Virtual Rapid Prototyping System , 2005, Trans. SDPS.

[123]  Deyi Xue,et al.  Recent research on developing Web-based manufacturing systems: a review , 2003 .

[124]  Gheorghe Oancea,et al.  Digital manufacturing of air-cooled single-cylinder engine block , 2015, The International Journal of Advanced Manufacturing Technology.

[125]  Ren C. Luo,et al.  The development of an intelligent Web-based rapid prototyping manufacturing system , 2004, IEEE Transactions on Automation Science and Engineering.

[126]  Ali Siadat,et al.  Integrated product-process design to suggest appropriate manufacturing technology: a review , 2017 .

[127]  Asli Yagmur Akbulut,et al.  The role of ERP tools in supply chain information sharing, cooperation, and cost optimization , 2005 .