Constitutive and microstructural characteristics of Ti-5Al-2.5Sn alloy during isothermal and non-isothermal multi-stage hot deformation across different phase regions

[1]  G. Requena,et al.  Interface‐Mediated Twinning‐Induced Plasticity in a Fine Hexagonal Microstructure Generated by Additive Manufacturing , 2021, Advanced materials.

[2]  D. Fu,et al.  Revealing the decomposition mechanisms of dislocations and metastable α' phase and their effects on mechanical properties in a Ti-6Al-4V alloy , 2021, Journal of Materials Science & Technology.

[3]  S. Yamasaki,et al.  In situ EBSD study of deformation behavior of primary α phase in a bimodal Ti-6Al-4V alloy during uniaxial tensile tests , 2020 .

[4]  F. Mücklich,et al.  New insights into the microstructural evolution of Ti-5Al-5Mo-5V-3Cr alloy during hot working , 2020, Materials Characterization.

[5]  J. Jonas,et al.  Post-dynamic α to β phase transformation and reverse transformation of Ti-5Al-3V alloy after hot deformation in two phase region , 2020 .

[6]  J. Jonas,et al.  Accelerated flow softening and dynamic transformation of Ti-6Al-4V alloy in two-phase region during hot deformation via coarsening α grain , 2020 .

[7]  K. Alaneme,et al.  Microstructural evolution during hot forming of Ti-6Al-4V alloy with complex initial microstructure , 2019, The International Journal of Advanced Manufacturing Technology.

[8]  Sushil K. Mishra,et al.  Flow stress constitutive relationship between lamellar and equiaxed microstructure during hot deformation of Ti-6Al-4V , 2019, Journal of Materials Processing Technology.

[9]  Hyoung-Wook Kim,et al.  Hot deformation behavior and microstructure evolution of annealed Al-7.9Zn-2.7Mg-2.0Cu (wt%) alloy , 2018, Journal of Alloys and Compounds.

[10]  L. Yingying,et al.  Elevated Temperature Deformation Behavior of TA7 Titanium Alloy , 2018, Rare Metal Materials and Engineering.

[11]  S. Suwas,et al.  Two-pass friction stir welding of aluminum alloy to titanium alloy: A simultaneous improvement in mechanical properties , 2018, Materials Science and Engineering: A.

[12]  J. Jonas,et al.  Effect of multipass deformation at elevated temperatures on the flow behavior and microstructural evolution in Ti-6Al-4V , 2018, Materials Science and Engineering: A.

[13]  Hui Zhang,et al.  A Correction to the Stress–Strain Curve During Multistage Hot Deformation of 7150 Aluminum Alloy Using Instantaneous Friction Factors , 2018, Journal of Materials Engineering and Performance.

[14]  J. Jonas,et al.  Dynamic transformation of Ti–6Al–4V during torsion in the two-phase region , 2018, Journal of Materials Science.

[15]  M. Zhan,et al.  Acceleration of globularization during interrupted compression of a two-phase titanium alloy , 2018 .

[16]  J. Jonas,et al.  Opposing and Driving Forces Associated with the Dynamic Transformation of Ti-6Al-4V , 2018, Metallurgical and Materials Transactions A.

[17]  Khalid Rahman,et al.  Effect of laser welding process on the microstructure, mechanical properties and residual stresses in Ti-5Al-2.5Sn alloy , 2017 .

[18]  A. Minor,et al.  In situ TEM observation of FCC Ti formation at elevated temperatures , 2017 .

[19]  T. Langdon,et al.  An evaluation of the hexagonal close-packed to face-centered cubic phase transformation in a Ti-6Al-4V alloy during high-pressure torsion , 2017 .

[20]  J. Jonas,et al.  Reverse Transformation Behavior of Ti-6Al-4V After Deformation in the Two-Phase Region , 2017, Metallurgical and Materials Transactions A.

[21]  Hui Zhang,et al.  Constitutive characteristics and microstructure evolution of 7150 aluminum alloy during isothermal and non-isothermal multistage hot compression , 2015 .

[22]  J. Jonas,et al.  Effect of Interpass Time on the Dynamic Transformation of a Plain C–Mn and a Nb Microalloyed Steel , 2015 .

[23]  J. Jonas,et al.  Effect of Mn and Si on the dynamic transformation of austenite above the Ae3 temperature , 2015 .

[24]  Q. Chao,et al.  Variant selection and intervariant crystallographic planes distribution in martensite in a Ti-6Al-4V alloy , 2014 .

[25]  V. Uthaisangsuk,et al.  Modeling of flow behavior of Ti–6Al–4V alloy at elevated temperatures , 2014 .

[26]  J. Yeom,et al.  The origins of flow softening during high-temperature deformation of a Ti–6Al–4V alloy with a lamellar microstructure , 2014 .

[27]  Sung-Hwan Lim,et al.  Stress-induced hexagonal close-packed to face-centered cubic phase transformation in commercial-purity titanium under cryogenic plane-strain compression , 2013 .

[28]  J. Jonas,et al.  Transformation of Deformed Austenite at Temperatures above the Ae3 , 2012 .

[29]  H. Yang,et al.  Deformation behavior and microstructure evolution in multistage hot working of TA15 titanium alloy: on the role of recrystallization , 2011 .

[30]  Xianghua Liu,et al.  On the Plastic Flow Behavior of Ti-6Al-4V Alloy during Multi-Stand Tandem Hot Rolling , 2010 .

[31]  M. Tan,et al.  High temperature deformation in Ti–5Al–2.5Sn alloy , 2007 .

[32]  S. Semiatin,et al.  Prediction of the kinetics of static globularization of Ti-6Al-4V , 2005 .

[33]  J. Kim,et al.  Constitutive analysis of the high-temperature deformation mechanisms of Ti-6Al-4V and Ti-6.85Al-1.6V alloys , 2005 .

[34]  S. Semiatin,et al.  Flow behavior and globularization kinetics during hot working of Ti–6Al–4V with a colony alpha microstructure , 1999 .

[35]  Jung-Min Kim,et al.  Microstructural analysis on boundary sliding and its accommodation mode during superplastic deformation of Ti–6Al–4V alloy , 1999 .

[36]  Ji Sik Kim,et al.  Quantitative analysis on boundary sliding and its accommodation mode during superplastic deformation of two-phase Ti-6Al-4V alloy , 1998 .

[37]  D. Josell,et al.  The formation of f.c.c. titanium in titanium-aluminum multilayers , 1996 .

[38]  T. Sheppard,et al.  Deformation characteristics of Ti–6Al–4V , 1988 .