Class—A Canadian land surface scheme for GCMS. I. Soil model

A new GCM land surface scheme is introduced, incorporating three soil layers with physically based calculations of heat and moisture transfers at the surface and across the layer boundaries. Snow-covered and snow-free areas are treated separately. The energy balance equation is solved iteratively for the surface temperature; the surface infiltration rate is calculated using a simplified theoretical analysis allowing for surface ponding. Snow cover is modelled as a discrete ‘soil’ layer. The results generated by CLASS are compared with those of an older model incorporating the force-restore method for the calculation of surface temperature and a bucket-type formulation for the ground moisture. Several month-long test runs are carried out in stand-alone mode. It is shown that the surface temperature in the old scheme responds more slowly to diurnal forcing and more quickly to longer term forcing than that modelled by CLASS, while its one-layer representation of soil moisture proves incapable of reproducing changes in the surface fluxes owing to surface variations of moisture content. Finally, the lumped treatment of snow and soil in the old scheme results in an extremely fast disappearance of the snow pack under certain conditions.

[1]  J. Blanchet,et al.  The Canadian Climate Centre Second-Generation General Circulation Model and Its Equilibrium Climate , 1992 .

[2]  A. V. D. Griend,et al.  Water and surface energy balance model with a multilayer canopy representation for remote sensing purposes , 1989 .

[3]  J. Kutzbach,et al.  Effects of soil moisture on the sensitivity of a climate model to earth orbital forcing at 9000 yr BP , 1989 .

[4]  Mojib Latif,et al.  The Effect of Eurasian Snow Cover on Regional and Global Climate Variations , 1989 .

[5]  S. Planton,et al.  A Simple Parameterization of Land Surface Processes for Meteorological Models , 1989 .

[6]  K. Yamazaki.  A study of the impact of soil moisture and surface albedo changes on global climate using the MRI-GCM-I , 1989 .

[7]  Robert E. Dickinson,et al.  The Force–Restore Model for Surface Temperatures and Its Generalizations , 1988 .

[8]  C. Rosenzweig,et al.  Improved Ground Hydrology Calculations for Global Climate Models (GCMs): Soil Water Movement and Evapotranspiration , 1988 .

[9]  G. Meehl,et al.  A Comparison of Soil-Moisture Sensitivity in Two Global Climate Models , 1988 .

[10]  Samuel Y. K. Yee.  The force-restore method revisited , 1988 .

[11]  J. Mitchell,et al.  Summer dryness in northern mid-latitudes due to increased CO2 , 1987, Nature.

[12]  G. Meehl,et al.  General circulation model CO2 sensitivity experiments: Snow-sea ice albedo parameterizations and globally averaged surface air temperature , 1986 .

[13]  A. Dalcher,et al.  A Simple Biosphere Model (SIB) for Use within General Circulation Models , 1986 .

[14]  Ann Henderson-Sellers,et al.  Biosphere-atmosphere Transfer Scheme (BATS) for the NCAR Community Climate Model , 1986 .

[15]  E. Aguado,et al.  Radiation Balances of Melting Snow Covers at an Open Site in the Central Sierra Nevada, California , 1985 .

[16]  B. Hunt.  A model study of some aspects of soil hydrology relevant to climatic modelling , 1985 .

[17]  A. Henderson‐sellers,et al.  A global archive of land cover and soils data for use in general circulation climate models , 1985 .

[18]  David A. Robinson,et al.  Albedo of a Dissipating Snow Cover , 1984 .

[19]  G. Hornberger,et al.  A Statistical Exploration of the Relationships of Soil Moisture Characteristics to the Physical Properties of Soils , 1984 .

[20]  H. Pan,et al.  A two-layer model of soil hydrology , 1984 .

[21]  Thomas J. Schmugge,et al.  A soil and atmospheric boundary layer model for evapotranspiration and soil moisture studies , 1983 .

[22]  Peter H. Stone,et al.  Efficient Three-Dimensional Global Models for Climate Studies: Models I and II , 1983 .

[23]  R. Pielke,et al.  Simulation of the effects of surface fluxes of heat and moisture in a mesoscale numerical model: 1. Soil layer , 1981 .

[24]  Omar T. Farouki,et al.  The thermal properties of soils in cold regions , 1981 .

[25]  J. D. Lin.  On the force-restore method for prediction of ground surface temperature , 1980 .

[26]  G. Hornberger,et al.  Empirical equations for some soil hydraulic properties , 1978 .

[27]  J. Deardorff.  Efficient prediction of ground surface temperature and moisture, with inclusion of a layer of vegetation , 1978 .

[28]  O. Johansen.  Thermal Conductivity of Soils , 1977 .

[29]  Thomas C. Grenfell,et al.  The Optical Properties of Ice and Snow in the Arctic Basin , 1977, Journal of Glaciology.

[30]  M. Mellor.  Engineering Properties of Snow , 1977, Journal of Glaciology.

[31]  Y. Mualem.  A New Model for Predicting the Hydraulic Conductivity , 1976 .

[32]  S. P. Neuman,et al.  Wetting front pressure head in the infiltration model of Green and Ampt , 1976 .

[33]  Frank D. Eaton,et al.  Some Characteristics of the Albedo of Snow , 1975 .

[34]  F. S. Nakayama,et al.  The Dependence of Bare Soil Albedo on Soil Water Content. , 1975 .

[35]  Bruce R. Barkstrom,et al.  Theory of the optical properties of snow , 1974 .

[36]  Curtis L. Larson,et al.  Modeling infiltration during a steady rain , 1973 .

[37]  Herman Bouwer,et al.  Rapid field measurement of air entry value and hydraulic conductivity of soil as significant parameters in flow system analysis , 1966 .

[38]  Charles W. Thomas.  On the Transfer of Visible Radiation through Sea Ice and Snow , 1963 .

[39]  R. Longley.  Snow Depth and Snow Density at Resolute, Northwest Territories , 1960, Journal of Glaciology.

[40]  L. W. Gold.  Changes in a Shallow Snow Cover Subject to a Temperate Climate , 1958, Journal of Glaciology.

[41]  W. Green,et al.  Studies on Soil Phyics. , 1911, The Journal of Agricultural Science.