Modal instability-suppressing, single-frequency photonic crystal fiber amplifier with 811 W output power.

An acoustic- and gain-tailored Yb-doped polarization-maintaining photonic crystal fiber is used to demonstrate 811 W single-frequency output power with near diffraction-limited beam quality. The fiber core is composed of 7 individually doped segments arranged to create three distinct transverse acoustic regions; including one region that is Yb-free. The utility of the Yb-free region is to reduce coupling between the LP01 and LP11 modes to mitigate the modal instability. The application of thermal gradients is utilized in conjunction with the transverse acoustic tailoring to suppress stimulated Brillouin scattering. To the best of our knowledge, the 811 W output represents the highest power ever reported from a near diffraction-limited single-frequency fiber laser.

[1]  Arlee V. Smith,et al.  Mode instability in high power fiber amplifiers. , 2011, Optics express.

[2]  Benno Willke,et al.  Lasers and optics: looking towards third generation gravitational wave detectors , 2011 .

[3]  Clint Zeringue,et al.  Pump-limited, 203 W, single-frequency monolithic fiber amplifier based on laser gain competition. , 2011, Optics letters.

[4]  Stabilized lasers for advanced gravitational wave detectors , 2010 .

[5]  A. B. Ruffin,et al.  502 Watt, single transverse mode, narrow linewidth, bidirectionally pumped Yb-doped fiber amplifier. , 2007, Optics express.

[6]  T. Eidam,et al.  Experimental observations of the threshold-like onset of mode instabilities in high power fiber amplifiers. , 2011, Optics express.

[7]  D. Kracht,et al.  Injection-locked single-frequency laser with an output power of 220 W , 2011 .

[8]  B. Ward,et al.  Origin of thermal modal instabilities in large mode area fiber amplifiers. , 2012, Optics express.

[9]  Iyad Dajani,et al.  Acoustically segmented photonic crystal fiber for single-frequency high-power laser applications. , 2011, Optics letters.

[10]  Y. Jeong,et al.  Power Scaling of Single-Frequency Ytterbium-Doped Fiber Master-Oscillator Power-Amplifier Sources up to 500 W , 2007, IEEE Journal of Selected Topics in Quantum Electronics.

[11]  John Ballato,et al.  The Brillouin gain coefficient of Yb-doped aluminosilicate glass optical fibers , 2013 .

[12]  J. Rothenberg,et al.  Low-phase-noise, single-frequency, single-mode 608 W thulium fiber amplifier. , 2009, Optics letters.

[13]  Kristian Rymann Hansen,et al.  Thermally induced mode coupling in rare-earth doped fiber amplifiers. , 2012, Optics letters.

[14]  Arlee V. Smith,et al.  Increasing mode instability thresholds of fiber amplifiers by gain saturation. , 2013, Optics express.

[15]  F. Jansen,et al.  Passive mitigation strategies for mode instabilities in high-power fiber laser systems. , 2013, Optics express.