论文信息 - A finite element analysis of bending stresses induced in external and internal involute spur gears

A finite element analysis of bending stresses induced in external and internal involute spur gears

Abstract This paper describes the use of the finite element method for predicting the fillet stress distribution experienced by loaded spur gears. The location of the finite element model boundary and the element mesh density are investigated. Fillet stresses predicted by the finite element model are compared with the results of photoelastic experiments. Both external and internal spur gear tooth forms are considered.

John Andrews

[1] G. Chabert,et al. An Evaluation of Stresses and Deflection of Spur Gear Teeth Under Strain , 1974 .

[2] E. Buckingham. Analytical mechanics of gears , 1949 .

[3] R. B. Heywood. Tensile Fillet Stresses in Loaded Projections , 1948 .

[4] E. J. Hearn,et al. An automatic design optimization procedure to minimize fillet bending stresses in involute spur gears , 1987 .

[5] J. W. Polder. Overcut, a new theory for tip interference in internal gears , 1969 .

[6] M. A. Jacobson. Bending Stresses in Spur Gear Teeth: Proposed New Design Factors Based on a Photo-elastic Investigation: , 1955 .

[7] B. A. Shotter. A New Approach to Gear Tooth Root Stresses , 1974 .