Mechanical performance of innovative GFRP-bamboo-wood sandwich beams: Experimental and modelling investigation

Abstract Innovative GFRP-bamboo-wood sandwich beams were developed and investigated experimentally and by modeling. The effects of the thickness of the GFRP and bamboo layers on the overall structural performance in bending were clarified. It was shown that an increase of thickness of the bamboo and GFRP layers could significantly increase the flexural stiffness and ultimate load of the sandwich beams. ANSYS was used to parametrically analyze the material efficiency and to obtain optimal solutions for the thickness of the GFRP, wood, and bamboo layers. The total depth of 60 mm and the thickness of 6 mm for bamboo and of 4.5 mm for GFRP presented the best material efficiency in terms of stiffness enhancement. A simplified model based on Timoshenko beam theory was proposed to predict the load-deflection behavior of the sandwich beams, where the section transformation method was used to calculate the stress distribution along the depth of the sandwich beams. The calculated results showed good correlation with the experimental and numerical results. Design optimization in terms of self-weight and cost of the proposed sandwich beam was conducted using MATLAB and ANSYS, and the optimized thicknes was obtained with minimized self-weight, cost, and acceptable mechanical performance.

[1]  M. B. Ioannidis,et al.  A new hybrid concept for sandwich structures , 2008 .

[2]  Yu Bai,et al.  Combination of Bamboo Filling and FRP Wrapping to Strengthen Steel Members in Compression , 2013 .

[3]  Yan Xiao,et al.  Flexural behavior of FRP reinforced glubam beams , 2011 .

[4]  Erol Sancaktar,et al.  Design, analysis, and optimization of composite leaf springs for light vehicle applications , 1999 .

[5]  Sung-Woo Lee,et al.  Current and Future Applications of Glass-Fibre-Reinforced Polymer Decks in Korea , 2010 .

[6]  Salim Belouettar,et al.  Experimental investigation of static and fatigue behaviour of composites honeycomb materials using four point bending tests , 2009 .

[7]  Yu Bai,et al.  Effects of ultraviolet radiation and associated elevated temperature on mechanical performance of steel/CFRP double strap joints , 2012 .

[8]  Simon Collins,et al.  Advanced Composite Bridge Decking System—Project ASSET , 2002 .

[9]  T. Keller,et al.  Plate bending behavior of a pultruded GFRP bridge deck system , 2004 .

[10]  Y. Amino.  Bamboo-precocious wood composite beams: bending capacity for long-term loading , 2005 .

[11]  H. G. Allen.  Analysis and design of structural sandwich panels , 1969 .

[12]  Sermet Demir,et al.  Optimization of design parameters for Turkish Tirkeş (war) bow , 2014 .

[13]  Jai Moo Kim,et al.  Design optimization framework for tiltrotor composite wings considering whirl flutter stability , 2010 .

[14]  Thomas Keller,et al.  GFRP-Balsa Sandwich Bridge Deck: Concept, Design, and Experimental Validation , 2014 .

[15]  P. Qiao,et al.  Impact analysis of fiber reinforced polymer honeycomb composite sandwich beams , 2007 .

[16]  Anastasios P. Vassilopoulos,et al.  FRP-Balsa Composite Sandwich Bridge Deck with Complex Core Assembly , 2013 .

[17]  João Paulo Davim,et al.  Optimization of machining parameters at high speed drilling of carbon fiber reinforced plastic (CFRP) laminates , 2012 .

[18]  Julio F. Davalos,et al.  Modeling and characterization of fiber-reinforced plastic honeycomb sandwich panels for highway bridge applications , 2001 .

[19]  Yan Xiao,et al.  Long-Term Loading Behavior of a Full-Scale Glubam Bridge Model , 2014 .

[20]  Anastasios P. Vassilopoulos,et al.  Structural limits of FRP-balsa sandwich decks in bridge construction , 2014 .

[21]  Sindu Satasivam,et al.  Adhesively bonded modular GFRP web-flange sandwich for building floor construction , 2014 .

[22]  Thiru Aravinthan,et al.  Flexural behaviour of glue-laminated fibre composite sandwich beams , 2010 .

[23]  Ricardo Perera,et al.  Application of artificial intelligence techniques to predict the performance of RC beams shear strengthened with NSM FRP rods. Formulation of design equations , 2014 .