Study on coupling diffusion of composite dust and cloud-mist dedust technology in fully mechanized driving face of mixed coal-rock roadway

[1]  Qi Zhang,et al.  A review of physical and chemical methods to improve the performance of water for dust reduction , 2022, Process Safety and Environmental Protection.

[2]  B. Qin,et al.  Coal dust suppression based on water mediums: A review of technologies and influencing factors , 2021 .

[3]  Zhiyong Zhou,et al.  Efficient capture of fine particulate matters by ultrasonic atomization , 2021, Journal of Environmental Chemical Engineering.

[4]  Jian Sun,et al.  Experimental synthesis and performance comparison analysis of high-efficiency wetting enhancers for coal seam water injection , 2021 .

[5]  Guo-rui Feng,et al.  Experimental study of the dust-removal performance of a wet scrubber , 2021, International Journal of Coal Science & Technology.

[6]  Shimin Liu,et al.  Respirable nano-particulate generations and their pathogenesis in mining workplaces: a review , 2021, International Journal of Coal Science & Technology.

[7]  Gang Zhou,et al.  CFD comparative analysis on the pollution characteristics of coal dust under turbulent airflow from coal cutting in the fully mechanized mining face , 2021 .

[8]  Xinfa Chen,et al.  Numerical analysis on spatial distribution for concentration and particle size of particulate pollutants in dust environment at fully mechanized coal mining face , 2021 .

[9]  S. Ramakrishna,et al.  Electrospun nanofibers for personal protection in mines , 2021 .

[10]  Gang Zhou,et al.  CFD simulation of multi-phase and multi-component diffusion of air-dust-gas in a fully mechanized mining face , 2021, Environmental Science and Pollution Research.

[11]  Gang Zhou,et al.  Numerical simulation investigation on optimal dust-exhausting airflow volume in fully mechanized caving face of high-gas coal mine , 2020 .

[12]  Wenjing Jiang,et al.  Synthesis and self-healing properties of composite microcapsule based on sodium alginate/melamine-phenol–formaldehyde resin , 2020 .

[13]  Wenjing Jiang,et al.  Molecular dynamics simulation and experimental characterization of anionic surfactant: Influence on wettability of low-rank coal , 2020 .

[14]  Xianhang Yang,et al.  Multiscale simulation of atomization process and droplet particles diffusion of pressure-swirl nozzle , 2020 .

[15]  Gang Zhou,et al.  Numerical simulation and engineering application of multistage atomization dustfall at a fully mechanized excavation face , 2020 .

[16]  W. Nie,et al.  The dust diffusion modeling and determination of optimal airflow rate for removing the dust generated during mine tunneling , 2020 .

[17]  Gang Zhou,et al.  CFD investigation on dust dispersion pollution of down/upwind coal cutting and relevant countermeasures for spraying dustfall in fully mechanized mining face , 2020 .

[18]  Gang Zhou,et al.  Synthesis and performance characteristics of a new ecofriendly crust-dust suppressant extracted from waste paper for surface mines , 2020, Journal of Cleaner Production.

[19]  Dong Liu,et al.  Synthesis and performance of a novel high-efficiency coal dust suppressant based on self-healing gel. , 2020, Environmental science & technology.

[20]  Wenjing Jiang,et al.  Preparation and performance characteristics of an environmentally-friendly agglomerant to improve the dry dust removal effect for filter material. , 2020, Journal of hazardous materials.

[21]  W. Nie,et al.  Effect of wind curtain on dust extraction in rock tunnel working face: CFD and field measurement analysis , 2020 .

[22]  Qingtao Zhang,et al.  Experimental study on modification of physicochemical characteristics of acidified coal by surfactants and ionic liquids , 2020 .

[23]  Yanchuan Li,et al.  Three-dimensional spatial and temporal distributions of dust in roadway tunneling , 2020, International Journal of Coal Science & Technology.

[24]  Pengfei Wang,et al.  Optimization of structural parameters and installation position of the wall-mounted air cylinder in the fully mechanized excavation face based on CFD and orthogonal design , 2019, Process Safety and Environmental Protection.

[25]  Jihe Chen,et al.  Study of high-pressure air curtain and combined dedusting of gas water spray in multilevel ore pass based on CFD-DEM , 2019, Advanced Powder Technology.

[26]  Guo-rui Feng,et al.  Investigation on the design of atomization device for coal dust suppression in underground roadways , 2019, Process Safety and Environmental Protection.

[27]  Guo-rui Feng,et al.  Numerical study of gas-solid two-phase flow around road-header drivers in a fully mechanized excavation face , 2019, Powder Technology.

[28]  W. R. Reed,et al.  Laboratory results of a 3rd generation roof bolter canopy air curtain for respirable coal mine dust control , 2019, International Journal of Coal Science & Technology.

[29]  Gang Zhou,et al.  Synthesis and Properties of a Conglomeration–Wetting Spray Agent for Dust Suppression , 2018, Industrial & Engineering Chemistry Research.

[30]  Weimin Cheng,et al.  Effects of atomization parameters of dust removal nozzles on the de-dusting results for different dust sources , 2016 .

[31]  W. Nie,et al.  The diffusion and pollution mechanisms of airborne dusts in fully-mechanized excavation face at mesoscopic scale based on CFD-DEM , 2016 .

[32]  Fan Geng,et al.  Numerical study on dust movement and dust distribution for hybrid ventilation system in a laneway of coal mine , 2015 .

[33]  Lidia Morawska,et al.  Particle deposition rates in residential houses , 2005 .

[34]  Qingtao Zhang,et al.  Dust removal effect of negatively-pressured spraying collector for advancing support in fully mechanized coal mining face: Numerical simulation and engineering application , 2020 .

[35]  Zhou Gan.  Influence regulations analysis of high-pressure atomization dust-settling to dust particle's microscopic parameters in fully mechanized caving coal face , 2014 .

[36]  Javier Toraño,et al.  Auxiliary ventilation in mining roadways driven with roadheaders: Validated CFD modelling of dust behaviour , 2011 .