Computational fluid dynamics studies on heat generation during friction stir welding of aluminum alloy

[1]  O. C. Zienkiewicz,et al.  VISCO-PLASTICITY--PLASTICITY AND CREEP IN ELASTIC SOLIDS--A UNIFIED NUMERICAL SOLUTION APPROACH , 1974 .

[2]  T. Sheppard,et al.  Determination of flow stress: Part 1 constitutive equation for aluminium alloys at elevated temperatures , 1979 .

[3]  J. Goldak,et al.  A new finite element model for welding heat sources , 1984 .

[4]  A. Jackson,et al.  Constitutive equations for use in prediction of flow stress during extrusion of aluminium alloys , 1997 .

[5]  M. W. Mahoney,et al.  Properties of friction-stir-welded 7075 T651 aluminum , 1998 .

[6]  M. Zhou,et al.  Constitutive equations for modelling flow softening due to dynamic recovery and heat generation during plastic deformation , 1998 .

[7]  L. Murr,et al.  Flow visualization and residual microstructures associated with the friction-stir welding of 2024 aluminum to 6061 aluminum , 1999 .

[8]  S. Semiatin,et al.  The adiabatic correction factor for deformation heating during the uniaxial compression test , 2001 .

[9]  A. Reynolds,et al.  Visualization of the material flow in AA2195 friction-stir welds using a marker insert technique , 2001 .

[10]  K. Mills.  Recommended Values of Thermophysical Properties for Selected Commercial Alloys , 2001 .

[11]  Anthony P. Reynolds,et al.  Two-dimensional friction stir welding process model based on fluid mechanics , 2003 .

[12]  M. Preuss,et al.  Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds , 2003 .

[13]  Anthony P. Reynolds,et al.  Structure, Properties, and Residual Stress of 304L Stainless Steel Friction Stir Welds , 2003 .

[14]  Rajiv S. Mishra,et al.  Microstructural investigation of friction stir welded 7050-T651 aluminium , 2003 .

[15]  Jesper Henri Hattel,et al.  An analytical model for the heat generation in friction stir welding , 2004 .

[16]  P. Prangnell,et al.  Grain structure formation during friction stir welding observed by the ‘stop action technique’ , 2005 .

[17]  H. Schmidt,et al.  A local model for the thermomechanical conditions in friction stir welding , 2004 .

[18]  Paul A. Colegrove,et al.  3-Dimensional CFD modelling of flow round a threaded friction stir welding tool profile , 2005 .

[19]  Jesper Henri Hattel,et al.  Modelling heat flow around tool probe in friction stir welding , 2005 .

[20]  Alvin M. Strauss,et al.  Experimental defect analysis and force prediction simulation of high weld pitch friction stir welding , 2006 .

[21]  Young Gon Kim,et al.  Three defect types in friction stir welding of aluminum die casting alloy , 2006 .

[22]  Carl D. Sorensen,et al.  Torque based weld power model for friction stir welding , 2007 .

[23]  Thomas J. Lienert,et al.  Three-dimensional heat and material flow during friction stir welding of mild steel , 2007 .

[24]  Paul A. Colegrove,et al.  Model for predicting heat generation and temperature in friction stir welding from the material properties , 2007 .

[25]  R. Mishra,et al.  A conceptual model for the process variables related to heat generation in friction stir welding of aluminum , 2008 .

[26]  Q. Shi,et al.  Auto-Adaptive Heat Source Model for Numerical Analysis of Friction Stir Welding , 2008 .

[27]  Yuang-Cherng Chiou,et al.  Experimental study on temperature distributions within the workpiece during friction stir welding of aluminum alloys , 2008 .

[28]  Jesper Henri Hattel,et al.  Thermal modelling of friction stir welding , 2008 .

[29]  H. Bhadeshia,et al.  Recent advances in friction-stir welding : Process, weldment structure and properties , 2008 .

[30]  J. T. Chen,et al.  The simulation of material behaviors in friction stir welding process by using rate-dependent constitutive model , 2008 .

[31]  William J. Arbegast,et al.  A flow-partitioned deformation zone model for defect formation during friction stir welding , 2008 .

[32]  Mica Grujicic,et al.  Computational Investigation of Hardness Evolution During Friction-Stir Welding of AA5083 and AA2139 Aluminum Alloys , 2011 .

[33]  H. Bhadeshia,et al.  Review: Friction stir welding tools , 2011 .

[34]  Xin Lin,et al.  Periodic variation of torque and its relations to interfacial sticking and slipping during friction stir welding , 2012 .

[35]  K. An,et al.  In situ neutron diffraction analysis of grain structure during friction stir processing of an aluminum alloy , 2012 .