A Study on the Detection Algorithm of an Advanced Ultrasonic Signal for Hydro-acoustic Releaser
暂无分享,去创建一个
Methods used for exploring marine resources and spaces include positioning a probe under water and then recalling it after a specified time. Hydro-acoustic Releasers are commonly used for positioning and retrieving of such exploration equipment. The most important factor in this kind of system is the reliability for recalling the instruments. The frequently used ultrasonic signal detection method can detect ultrasonic signals using a fixed comparator, but because of increased rates of errors due to outside interferences, information is repetitively acquired. This study presents an effective ultrasonic signal detection algorithm using the characteristics of a resonance and adaptive comparator Combined with the FSK+ASK modulator. As a result, approximately 8.8% of ultrasonic wave communication errors caused by background noise and transmission losses were reduced for effectively detecting ultrasonic waves. Furthermore, the resonance circuit's quality factor was enhanced (Q = 120 to 160). As such, the bias voltage of the transistor (Vb= 3.3 to 6.8V) was increased thereby enhancing the frequency's selectivity.
[1] Peng Shi,et al. New Upper Matrix Bounds for the Solution of the Continuous Algebraic Riccati Matrix Equation , 2008 .
[2] R. Alksne. Rapidly Deployable Systems (RDS) Underwater Acoustic Telemetry Trials Report , 2000 .
[3] Lei Guo,et al. Robust H∞ Control for Uncertain Two-Dimensional Discrete Systems Described by the General Model via Output Feedback Controllers , 2008 .
[4] 이외형,et al. Experimental Results of an Underwater Acoustic Communications using BFSK Modulation , 2003 .