System reliability as a surrogate measure of safety for horizontal curves: methodology and case studies

Reliability analysis has been advocated to account for the uncertainty in geometric design and to evaluate the risk associated with various design options. Most of the previous studies using reliability-analysis in highway design evaluated only one-mode of noncompliance. This study assesses the performance of horizontal curves using a system of multi-modal noncompliance (insufficient sight distance, vehicle skidding, and vehicle rollover). Five case studies of a highway in British Columbia are considered. Two approaches were used: (1) second-order reliability-bounds with FORM analysis (First-Order Reliability Method), (2) Monte-Carlo Simulation (MCS). A calibrated design chart that accommodates heavy-trucks on horizontal-curves with sharp-radii is provided. The results show that the differences in the system probability of noncompliance between one-mode and system of multi-modes of noncompliance are more pronounced for heavy-trucks. Results also show that the probability of noncompliance associated with vehicle rollover is significantly affected by the stability-ratio compared to height-ratio and roll-rate.

[1]  Changqing Gong,et al.  Importance sampling-based system reliability analysis of corroding pipelines considering multiple failure modes , 2018, Reliab. Eng. Syst. Saf..

[2]  Eric T. Donnell,et al.  Stopping Sight Distance and Available Sight Distance: New Model and Reliability Analysis Comparison , 2017 .

[3]  Tarek Sayed,et al.  Developing safety performance functions incorporating reliability-based risk measures. , 2011, Accident; analysis and prevention.

[4]  Ikjin Lee,et al.  Reliability analysis and reliability-based design optimization of roadway horizontal curves using a first-order reliability method , 2015 .

[5]  Fred Moses,et al.  A method of structural optimization based on structural system reliability , 1986 .

[6]  Yasser Hassan,et al.  Three-Dimensional, Probabilistic Highway Design , 2008 .

[7]  Tarek Sayed,et al.  Risk and Reliability Analysis of Geometric Design Criteria: A Critical Synthesis , 2019 .

[8]  Feng Yuan-sheng.  A method for computing structural system reliability with high accuracy , 1989 .

[9]  L Richl,et al.  Evaluating the Safety Risk of Narrow Medians Using Reliability Analysis , 2006 .

[10]  Tarek Sayed,et al.  Risk-optimal highway design: Methodology and case studies , 2012 .

[11]  Nataliya V Malyshkina,et al.  Empirical assessment of the impact of highway design exceptions on the frequency and severity of vehicle accidents. , 2009, Accident; analysis and prevention.

[12]  L Richl,et al.  Effect of speed prediction models and perceived radius on design consistency , 2005 .

[13]  Tarek Sayed,et al.  Predicting the safety performance associated with highway design decisions: A case study of the Sea to Sky Highway , 2005 .

[14]  Antoine G. Hobeika,et al.  Assessing the Risk in the Design of Passing Sight Distances , 2007 .

[15]  Terje Haukaas,et al.  Computer Program for Multimodel Reliability and Optimization Analysis , 2013, J. Comput. Civ. Eng..

[16]  Tarek Sayed,et al.  Risk-Based Highway Design , 2010 .

[17]  Zongze Wu,et al.  Optimal tracking control of flow velocity in a one-dimensional magnetohydrodynamic flow , 2019 .

[18]  Tarek Sayed,et al.  Methodology for safety optimization of highway cross-sections for horizontal curves with restricted sight distance. , 2012, Accident; analysis and prevention.

[19]  Yong Cang Zhang.  High-order reliability bounds for series systems and application to structural systems , 1993 .

[20]  Taehyun Shim,et al.  Understanding the limitations of different vehicle models for roll dynamics studies , 2007 .

[21]  Lu Sun,et al.  Reliability-Based Risk Analysis of Roadway Horizontal Curves , 2012 .

[22]  Lu Wang,et al.  Reliability-Based Specification on Critical Length of Highway Sections with Near-Maximum Grade , 2018 .

[23]  Yasser Hassan,et al.  Reliability-Based Design of Horizontal Curves on Two-Lane Rural Highways , 2016 .

[24]  Alain Pagès,et al.  System Reliability , 1986 .

[25]  Tarek Sayed,et al.  Multi-mode reliability-based design of horizontal curves. , 2016, Accident; analysis and prevention.

[26]  Tang-Hsien Chang.  EFFECT OF VEHICLES' SUSPENSION ON HIGHWAY HORIZONTAL CURVE DESIGN. TECHNICAL NOTE , 2001 .

[27]  Tarek Sayed,et al.  Calibrating Road Design Guides Using Risk-Based Reliability Analysis , 2013 .

[28]  Tarek Sayed,et al.  Risk-based framework for accommodating uncertainty in highway geometric design , 2009 .

[29]  Ikjin Lee,et al.  Reliability-Based Vehicle Safety Assessment and Design Optimization of Roadway Radius and Speed Limit in Windy Environments , 2014 .

[30]  S. Emerson,et al.  AASHTO (American Association of State Highway and Transportation Officials). 2001. A Policy on Geometric Design of Highways and Streets. Fourth Edition. Washington, D.C. , 2007 .

[31]  S. Easa.  Reliability Approach to Intersection Sight Distance Design , 2000 .

[32]  Sankaran Mahadevan,et al.  Ductile structural system reliability analysis using adaptive importance sampling , 1998 .

[33]  Hamid Farhad Mollashahi,et al.  Safety Evaluation and Adjustment of Superelevation Design Guides for Horizontal Curves Based on Reliability Analysis , 2017 .

[34]  Eric T. Donnell,et al.  Speed Prediction Models for Trucks on Two-Lane Rural Highways , 2001 .

[35]  Moshe E. Ben-Akiva,et al.  Probabilistic and Economic Factors in Highway Geometric Design , 1985, Transp. Sci..

[36]  Junho Song,et al.  Bounds on System Reliability by Linear Programming , 2003 .

[37]  Paolo Gardoni,et al.  Matrix-based system reliability method and applications to bridge networks , 2008, Reliab. Eng. Syst. Saf..

[38]  Joel P Leisch,et al.  New concepts in design-speed application , 1977 .

[39]  Eric T. Donnell,et al.  Reliability Approach to Horizontal Curve Design , 2014 .