A High-Efficiency Step-Up Current-Fed Push–Pull Quasi-Resonant Converter With Fewer Components for Fuel Cell Application
暂无分享,去创建一个
Qin Wang | Lan Xiao | Jialin Xu | Hongxu Li | Qunfang Wu | Qunfang Wu | Qin Wang | Lan Xiao | Jialin Xu | Hongxu Li
[1] Pertti Silventoinen,et al. Design of 10 kW resonant push-pull DC-DC converter for solid oxide fuel cell applications , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.
[2] C. Chu,et al. Analysis and design of a current-fed zero-voltage-switching and zero-current-switching CL-resonant push-pull dc-dc converter , 2009 .
[3] M. Mangal,et al. 18 kW DC-DC converter using push-pull inverter with lossless snubber circuits , 1996, Proceedings of International Conference on Power Electronics, Drives and Energy Systems for Industrial Growth.
[4] Bin Wu,et al. Interleaved ZVS Flyback-Forward converter with reduced output voltage stress on secondary rectifier diodes , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).
[5] D.J. Thrimawithana,et al. Analysis of Split-Capacitor Push–Pull Parallel-Resonant Converter in Boost Mode , 2008, IEEE Transactions on Power Electronics.
[6] Yisheng Yuan,et al. One zero-voltage-switching three-transistor push-pull converter , 2013 .
[7] A. H. Weinberg,et al. A new zero voltage and zero current power-switching technique , 1989 .
[8] A. Mertens,et al. Current-fed full bridge converter for fuel cell systems , 2008, 2008 IEEE Power Electronics Specialists Conference.
[9] A.M. Khambadkone,et al. Analysis and Implementation of a High Efficiency, Interleaved Current-Fed Full Bridge Converter for Fuel Cell System , 2007, IEEE Transactions on Power Electronics.
[10] Akshay Kumar Rathore,et al. Naturally Clamped Zero-Current Commutated Soft-Switching Current-Fed Push–Pull DC/DC Converter: Analysis, Design, and Experimental Results , 2015, IEEE Transactions on Power Electronics.
[11] Esteban Sanchis-Kilders,et al. High-Efficiency Regulation Method for a Zero-Current and Zero-Voltage Current-Fed Push–Pull Converter , 2011, IEEE Transactions on Power Electronics.
[12] Akshay Kumar Rathore,et al. Impulse Commutated Zero-Current Switching Current-Fed Push–Pull Converter: Analysis, Design, and Experimental Results , 2015, IEEE Transactions on Industrial Electronics.
[13] F.Z. Peng,et al. Low cost fuel cell converter system for residential power generation , 2004, IEEE Transactions on Power Electronics.
[14] Sewan Choi,et al. An Improved Current-Fed ZVS Isolated Boost Converter for Fuel Cell Applications , 2010, IEEE Transactions on Power Electronics.
[15] Sewan Choi,et al. An improved current-fed ZVS isolated boost converter for fuel cell applications , 2010, 2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition.
[16] Akshay Kumar Rathore,et al. Extended Range ZVS Active-Clamped Current-Fed Full-Bridge Isolated DC/DC Converter for Fuel Cell Applications: Analysis, Design, and Experimental Results , 2013, IEEE Transactions on Industrial Electronics.
[17] Jung-Min Kwon,et al. High-Efficiency Fuel Cell Power Conditioning System With Input Current Ripple Reduction , 2009, IEEE Transactions on Industrial Electronics.
[18] Michael A. E. Andersen,et al. High-Efficiency Isolated Boost DC–DC Converter for High-Power Low-Voltage Fuel-Cell Applications , 2010, IEEE Transactions on Industrial Electronics.
[19] I. Barbi,et al. A single-switch flyback-current-fed DC-DC converter , 1998 .
[20] Yi Zhao,et al. High-Step-Up and High-Efficiency Fuel-Cell Power-Generation System With Active-Clamp Flyback–Forward Converter , 2012, IEEE Transactions on Industrial Electronics.
[21] Yong-Chae Jung,et al. Soft-Switching Current-Fed Push–Pull Converter for 250-W AC Module Applications , 2014, IEEE Transactions on Power Electronics.
[22] Yong Zhao,et al. Zero-voltage-switching dual-boost converter with multi-functional inductors and improved symmetrical rectifier for distributed generation systems , 2012 .
[23] Akshay Kumar Rathore,et al. Comparison of soft-switching voltage-fed and current-fed bi-directional isolated Dc/Dc converters for fuel cell vehicles , 2012, 2012 IEEE International Symposium on Industrial Electronics.
[24] Jung-Min Kwon,et al. High Step-Up Active-Clamp Converter With Input-Current Doubler and Output-Voltage Doubler for Fuel Cell Power Systems , 2009, IEEE Transactions on Power Electronics.
[25] Kamon Jirasereeamornkul,et al. Analysis and Implementation of a Half Bridge Class-DE Rectifier for Front-End ZVS Push-Pull Resonant Converters , 2013 .
[26] Stephen J. Finney,et al. Energy recovery snubber circuit for a dc-dc push-pull converter , 2012 .
[27] M. Mohr,et al. Voltage Fed and Current Fed Full Bridge Converter for the Use in Three Phase Grid Connected Fuel Cell Systems , 2006, 2006 CES/IEEE 5th International Power Electronics and Motion Control Conference.
[28] Takashi Yamashita,et al. Stability in high-output-voltage push-pull current-fed converters , 1993 .
[29] Akshay Kumar Rathore,et al. Analysis, Design and Experimental Results of Wide Range ZVS Active-Clamped L-L Type Current-Fed DC/DC Converter for Fuel Cells to Utility Interface , 2012, IEEE Transactions on Industrial Electronics.
[30] D.S.L. Simonetti,et al. An isolated DC-DC boost converter using two cascade control loops , 1997, ISIE '97 Proceeding of the IEEE International Symposium on Industrial Electronics.
[31] Ivo Barbi,et al. Isolated DC-DC converters with high-output voltage for TWTA telecommunication satellite applications , 2003 .
[32] Zhe Zhang,et al. Soft-Switched Dual-Input DC–DC Converter Combining a Boost-Half-Bridge Cell and a Voltage-Fed Full-Bridge Cell , 2013, IEEE Transactions on Power Electronics.
[33] Akshay Kumar Rathore,et al. Hybrid Modulated Extended Secondary Universal Current-Fed ZVS Converter for Wide Voltage Range: Analysis, Design, and Experimental Results , 2015, IEEE Transactions on Industrial Electronics.
[34] Prasad Enjeti,et al. Development of a low cost fuel cell inverter system with DSP control , 2002, 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289).
[35] Bret Whitaker,et al. Extending the operational limits of the push-pull converter with SiC devices and an active energy recovery clamp circuit , 2015, 2015 IEEE Applied Power Electronics Conference and Exposition (APEC).
[36] I. Barbi,et al. A ZVS clamping mode-current-fed push-pull DC-DC converter , 1998, IEEE International Symposium on Industrial Electronics. Proceedings. ISIE'98 (Cat. No.98TH8357).
[37] Yi Zhao,et al. Analysis, Design, and Experimentation of an Isolated ZVT Boost Converter With Coupled Inductors , 2011, IEEE Transactions on Power Electronics.
[38] Chung-Yuen Won,et al. Fuel Cell Generation System With a New Active Clamping Current-Fed Half-Bridge Converter , 2007, IEEE Transactions on Energy Conversion.
[39] Yu-Kang Lo,et al. Zero-voltage switching current-fed flyback converter for power factor correction application , 2013 .
[40] Hui Li,et al. A Soft Switching Three-phase Current-fed Bidirectional DC-DC Converter With High Efficiency Over a Wide Input Voltage Range , 2012, IEEE Transactions on Power Electronics.
[41] A. Mertens,et al. Analysis of a Voltage-fed Full Bridge DC-DC Converter in Fuel Cell Systems , 2007, 2007 IEEE Power Electronics Specialists Conference.
[42] Eugene H. Kim,et al. High step-up resonant push-pull converter with high efficiency , 2009 .
[43] Alessandro Pisano,et al. Observer-Based Air Excess Ratio Control of a PEM Fuel Cell System via High-Order Sliding Mode , 2015, IEEE Transactions on Industrial Electronics.
[44] Sewan Choi,et al. A three-phase current-fed push-pull DC-DC converter with active clamp for fuel cell applications , 2011, 2010 Twenty-Fifth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).