Assessment of natural crack initiation and its propagation in slow speed bearings

Monitoring of bearings is an essential part of most condition monitoring programmes in rotating machinery. This paper demonstrates the use of acoustic emission (AE) measurements to detect, monitor and locate natural defect initiation and propagation in a thrust rolling element bearing. To undertake this task a special purpose test-rig was built that allowed for accelerated natural degradation of a bearing race. It is concluded that sub-surface initiation and subsequent crack propagation can be detected using a range of time and frequency domain analysis techniques on AE's generated from natural degrading bearings. The paper also investigates the source characterisation of AE signals associated with a defective bearing whilst in operation.

[1]  D Mba,et al.  Bearing defect diagnosis and acoustic emission , 2003 .

[2]  L. D. Hall.  Acoustic emissions diagnosis of rotor-stator rubs using the KS statistic , 2004 .

[3]  B. Samanta,et al.  Gear fault diagnosis using energy-based features of acoustic emission signals , 2002 .

[4]  T. Yoshioka,et al.  Detection of rolling contact sub-surface fatigue cracks using acoustic emission technique , 1993 .

[5]  Khamis Rajab Nasser Al-Balushi.  The use of high frequency stress waves for monitoring gears , 1995 .

[6]  Amiya R Mohanty,et al.  Application of KS test in ball bearing fault diagnosis , 2004 .

[7]  T. A. Harris,et al.  Rolling Bearing Analysis , 1967 .

[8]  N. Tandon,et al.  Application of acoustic emission technique for the detection of defects in rolling element bearings , 2000 .

[9]  David Mba,et al.  Development of Acoustic Emission Technology for Condition Monitoring andDiagnosis of Rotating Machines; Bearings, Pumps, Gearboxes, Engines and RotatingStructures. , 2006 .

[10]  A. Palmgren.  Ball and roller bearing engineering , 1945 .

[11]  David Mba,et al.  Observations and Location of Acoustic Emissions for a Naturally Degrading Rolling Element Thrust Bearing , 2008 .

[12]  L. D. Hall,et al.  Acoustic Emission Signal Classification in Condition Monitoring Using theKolmogorov-Smirnov Statistic. , 2001 .

[13]  D Mba,et al.  Condition monitoring of slow-speed rolling element bearings using stress waves , 2001 .

[14]  Ibrahim Esat,et al.  A NEW APPROACH TO TIME-DOMAIN VIBRATION CONDITION MONITORING: GEAR TOOTH FATIGUE CRACK DETECTION AND IDENTIFICATION BY THE KOLMOGOROV–SMIRNOV TEST , 2001 .

[15]  David,et al.  A comparative experimental study on the use of acoustic emission and vibration analysis for bearing defect identification and estimation of defect size , 2006 .

[16]  Arthur W. Lees,et al.  Detection of severe sliding and pitting fatigue wear regimes through the use of broadband acoustic emission , 2005 .