Ti-6Al-4V/SUS316L dissimilar joints with ultrahigh joint efficiency fabricated by a novel pressure-controlled joule heat forge welding method

[1]  K. Ushioda,et al.  Principle for obtaining high joint quality in dissimilar friction welding of Ti-6Al-4V alloy and SUS316L stainless steel , 2020 .

[2]  H. Fujii,et al.  Linear Friction Stir Welding of Medium Carbon Steel at Low Temperature , 2019, ISIJ International.

[3]  P. Li,et al.  Inhomogeneous interface structure and mechanical properties of rotary friction welded TC4 titanium alloy/316L stainless steel joints , 2018, Journal of Manufacturing Processes.

[4]  Min-Ku Lee,et al.  Microstructure and mechanical behavior of a titanium-to-stainless steel dissimilar joint brazed with Ag-Cu alloy filler and an Ag interlayer , 2017 .

[5]  Jinglong Li,et al.  Microstructure evolution and mechanical properties of rotary friction welded TC4/SUS321 joints at various rotation speeds , 2016 .

[6]  Mostafa Ghayour,et al.  Analysis of the Vibrational Stress Relief for Reducing the Residual Stresses Caused by Machining , 2016, Experimental Techniques.

[7]  Wenya Li,et al.  Linear and rotary friction welding review , 2016 .

[8]  M. Balasubramanian,et al.  Experimental investigation of Ti–6Al–4V titanium alloy and 304L stainless steel friction welded with copper interlayer , 2015 .

[9]  Jinglong Li,et al.  Effect of friction time on mechanical and metallurgical properties of continuous drive friction welded Ti6Al4V/SUS321 joints , 2014 .

[10]  S. Chatterjee,et al.  Evaluation of interface microstructure and mechanical properties of the diffusion bonded joints of Ti–6Al–4V alloy to micro-duplex stainless steel , 2011 .

[11]  Shusen Zhao,et al.  Numerical simulation and experimental investigation of laser overlap welding of Ti6Al4V and 42CrMo , 2011 .

[12]  S. Chatterjee,et al.  On the Direct Diffusion Bonding of Titanium Alloy to Stainless Steel , 2010 .

[13]  B. Mishra,et al.  The effect of intermetallics on the strength properties of diffusion bonds formed between Ti–5.5Al–2.4V and 304 stainless steel , 2003 .

[14]  M. Eroglu,et al.  Diffusion Bonding of a Microduplex Stainless Steel to Ti-6Al-4V , 2001 .

[15]  J. F. Liu,et al.  Residual Stress Modeling in Electric Discharge Machining (EDM) by Incorporating Massive Random Discharges , 2016 .

[16]  A. Yonezu,et al.  Estimation method of residual stress and plastic strain in austenitic stainless steel by single indentation test , 2015 .

[17]  Jihua Huang,et al.  Microstructures and mechanical property of laser butt welding of titanium alloy to stainless steel , 2014 .

[18]  I. S. Jawahir,et al.  Analysis of residual stresses induced by dry turning of difficult-to-machine materials , 2008 .