Creep crack growth in high temperature ductile materials

Abstract In the past 15 years, considerable advancements have occurred in the area of time-dependent fracture mechanics (TDFM) for predicting crack growth in the presence of creep strains. These concepts and the supporting experimental data are reviewed in this paper with particular emphasis on ductile high temperature steels such as Cr-Mo and Cr-Mo-V ferritic steels and the stainless steels. Three crack tip parameters, C ∗ (t) , C ( t ) and C t , are identified and discussed in detail for characterizing the creep crack growth rate at elevated temperatures in ductile materials. In the extensive creep regime all three parameters are identical. In the small-scale and the transition creep region, C ∗ is not valid and C ( t ) ≠ C t . In this paper, these parameters, their mechanics basis and their abilities to correlate creep crack growth rates in high temperature steels are discussed in detail. The areas which need further work are also outlined.

[1]  John W. Hutchinson,et al.  Fully plastic crack problems: The center-cracked strip under plane strain , 1975 .

[2]  A. Saxena,et al.  Creep crack growth behavior in 316 stainless steel at 594°C (1100°F) , 1983 .

[3]  John W. Hutchinson,et al.  Singular behaviour at the end of a tensile crack in a hardening material , 1968 .

[4]  Frank A. McClintock,et al.  Creep relaxation of stress around a crack tip , 1981 .

[5]  John R. Rice,et al.  Mechanics of Crack Growth , 1976 .

[6]  Chung-Yuen Hui,et al.  The asymptotic stress and strain field near the tip of a growing crack under creep conditions , 1981 .

[7]  Consideration of primary creep at a stationary crack tip: Implications for the Ct parameter , 1988 .

[8]  John L. Bassani,et al.  Transient crack growth under creep conditions , 1986 .

[9]  H. Riedel,et al.  Creep crack growth in ductile, creep-resistant steels , 1987 .

[10]  A. Yokobori,et al.  The crack initiation and growth under high temperature creep, fatigue and creep-fatigue multiplication , 1988 .

[11]  J. T. Staley,et al.  Mechanisms of creep crack growth in 1 wt% antimony-copper: Implications for fracture parameters , 1990 .

[12]  Albert S. Kobayashi,et al.  Elastic-Plastic Fracture , 1979 .

[13]  J. Rice,et al.  Plane strain deformation near a crack tip in a power-law hardening material , 1967 .

[14]  Hermann Riedel,et al.  Creep deformation at crack tips in elastic-viscoplastic solids , 1981 .

[15]  Ashok Saxena,et al.  Creep Crack Growth Behavior in Power Plant Boiler and Steam Pipe Steels , 1988 .