Fabrication of fine-grained, high strength and toughness Mg alloy by extrusion−shearing process

[1]  P. Mao,et al.  Microstructure and mechanical properties of Mg-Zn-Ca-Zr alloy fabricated by hot extrusion-shearing process , 2020 .

[2]  P. Mao,et al.  Effect of Cu on microstructure, mechanical properties, and texture evolution of ZK60 alloy fabricated by hot extrusion−shearing process , 2020, Transactions of Nonferrous Metals Society of China.

[3]  Hua-nan Liu,et al.  Potential of multi-pass ECAP on improving the mechanical properties of a high-calcium-content Mg-Al-Ca-Mn alloy , 2019 .

[4]  Q. Duan,et al.  Influence of Nd addition on microstructures and mechanical properties of a hot-extruded Mg−6.0Zn−0.5Zr (wt.%) alloy , 2019, Journal of Alloys and Compounds.

[5]  Katharina Werbach,et al.  Exceptional Strengthening of Biodegradable Mg-Zn-Ca Alloys through High Pressure Torsion and Subsequent Heat Treatment , 2019, Materials.

[6]  S. Kamado,et al.  Ultra-fine grained Mg-Zn-Ca-Mn alloy with simultaneously improved strength and ductility processed by equal channel angular pressing , 2019, Journal of Alloys and Compounds.

[7]  H. Zengin,et al.  Effect of La content and extrusion temperature on microstructure, texture and mechanical properties of Mg-Zn-Zr magnesium alloy , 2018, Materials Chemistry and Physics.

[8]  Jun Zhou,et al.  Deformation behaviors and cyclic strength assessment of AZ31B magnesium alloy based on steady ratcheting effect , 2018 .

[9]  J. Džugan,et al.  Influence of Accumulative Roll Bonding on the Texture and Tensile Properties of an AZ31 Magnesium Alloy Sheets , 2018, Materials.

[10]  K. Kainer,et al.  Recent research and developments on wrought magnesium alloys , 2017 .

[11]  Yuansheng Cheng,et al.  Influence of inner fillet radius on effective strain homogeneity in equal channel angular pressing , 2017 .

[12]  Huihui Yu,et al.  The mechanism for the high dependence of the Hall-Petch slope for twinning/slip on texture in Mg alloys , 2017 .

[13]  Dingfei Zhang,et al.  The influences of extrusion-shear process on microstructures evolution and mechanical properties of AZ31 magnesium alloy , 2017 .

[14]  E. Bagherpour,et al.  Nanostructured pure copper fabricated by simple shear extrusion (SSE): A correlation between microstructure and tensile properties , 2017 .

[15]  Yan Li,et al.  Mechanical properties and biocorrosion behaviour of deformed Mg–Gd–Nd–Zn–Zr alloy by equal channel angular pressing , 2016 .

[16]  J. Čížek,et al.  Effect of different c/a ratio on the microstructure and mechanical properties in magnesium alloys processed by ECAP , 2016 .

[17]  F. Pan,et al.  Mechanical properties and energy absorption of extruded Mg–2.0Zn–0.3Zr alloy with Y addition , 2015, Rare Metals.

[18]  Yuntian Zhu,et al.  Superior mechanical properties of ZK60 mg alloy processed by equal channel angular pressing and rolling , 2015 .

[19]  H. Jeong,et al.  Effect of Ce addition on the microstructure and tensile properties of extruded Mg–Zn–Zr alloys , 2014 .

[20]  M. Janeček,et al.  Comparison of the microstructure and the mechanical properties of AX41 magnesium alloy processed by EX-ECAP via three different routes A, Bc and C , 2014 .

[21]  K. Kaminishi,et al.  Evaluation Grain Homogeneity of Aluminium after ECAP Process by ECAP Geometry Analysis Using Taguchi Method , 2013 .

[22]  H. Miyanaji,et al.  A Modification on ECAP Process by Incorporating Twist Channel , 2013, Journal of Materials Engineering and Performance.

[23]  X. J. Wang,et al.  Dynamic recrystallization behavior during hot deformation and mechanical properties of 0.2 μm SiCp reinforced Mg matrix composite , 2013 .

[24]  K. Hono,et al.  Effect of Zr addition on the mechanical properties of as-extruded Mg–Zn–Ca–Zr alloys , 2010 .

[25]  Dingfei Zhang,et al.  Die structure optimization of equal channel angular extrusion for AZ31 magnesium alloy based on finite element method , 2010 .

[26]  T. Raghu,et al.  Equal channel angular pressing die to extrude a variety of materials , 2009 .

[27]  C. Şimşir,et al.  Investigating the effects of hardening of aluminium alloys on equal-channel angular pressing-A finite-element study , 2009 .

[28]  M. Bamberger,et al.  Trends in the Development of New Mg Alloys , 2008 .

[29]  S. Zhao,et al.  An Ultrafine-Grained AZ31 Magnesium Alloy Sheet With Enhanced Superplasticity Prepared by Accumulative Roll Bonding , 2007 .

[30]  C. L. Pérez.  On the correct selection of the channel die in ECAP processes , 2004 .

[31]  W. Kim,et al.  Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing , 2003 .

[32]  W. Kim,et al.  Mechanical properties and microstructures of an AZ61 Mg Alloy produced by equal channel angular pressing , 2002 .

[33]  B. Mordike,et al.  Magnesium: Properties — applications — potential , 2001 .

[34]  T. Langdon,et al.  Development of a multi-pass facility for equal-channel angular pressing to high total strains , 2000 .

[35]  V. Segal.  Equal channel angular extrusion: from macromechanics to structure formation , 1999 .

[36]  T. Langdon,et al.  Significance of adiabatic heating in equal-channel angular pressing , 1999 .

[37]  Chao Xu,et al.  The partial substitution of Y with Gd on microstructures and mechanical properties of as-cast and as-extruded Mg-10Zn-6Y-0.5Zr alloy , 2018 .

[38]  F. Fereshteh-Saniee,et al.  Microstructural homogeneity, texture, tensile and shear behavior of AM60 magnesium alloy produced by extrusion and equal channel angular pressing , 2013 .