Lifetime Comparison of Power Semiconductors in Three-Level Converters for 10-MW Wind Turbine Systems

The power electronic converter, especially the power semiconductor, is a major contributor to the failure rates of the wind turbine drivetrain. As the temperature is a major driving factor behind the failure mechanisms of these power semiconductors, the choice of topology and switching strategy can have a significant effect on the reliability of the converter. This paper presents a detailed comparison of several three-level converter topologies and switching strategies on the basis of loss distribution, thermal, and lifetime performance. This investigation is done through simulations on a 10-MW direct drive permanent magnet drivetrain. The study shows that overrating in the form of using overrated topologies, or the use of overrated components can result in large gains in lifetime expectancy and quantifies these gains. It concludes that the improvements offered by overrated topologies and overrated components are comparable and this use of the overrated topologies do not offer a significant advantage over the use of topologies with overrated components.

[1]  Pedro Rodriguez,et al.  Medium voltage three-level converters for the grid connection of a multi-MW wind turbine , 2009, 2009 13th European Conference on Power Electronics and Applications.

[2]  Ke Ma.  Electro-Thermal Model of Power Semiconductors Dedicated for Both Case and Junction Temperature Estimation , 2015 .

[3]  H. Polinder,et al.  10 MW Wind Turbine Direct-Drive Generator Design with Pitch or Active Speed Stall Control , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[4]  A. Hernandez,et al.  Design of a Back-to-Back NPC Converter Interface for Wind Turbines With Squirrel-Cage Induction Generator , 2008, IEEE Transactions on Energy Conversion.

[5]  Dehong Xu,et al.  Power devices loading in multilevel converters for 10 MW wind turbines , 2011, 2011 IEEE International Symposium on Industrial Electronics.

[6]  Joao P. S. Catalao,et al.  Power converter topologies for wind energy conversion systems: Integrated modeling, control strategy and performance simulation , 2010 .

[7]  B. Backlund,et al.  Topologies, voltage ratings and state of the art high power semiconductor devices for medium voltage wind energy conversion , 2009, 2009 IEEE Power Electronics and Machines in Wind Applications.

[8]  F. Blaabjerg,et al.  Transient modelling of loss and thermal dynamics in power semiconductor devices , 2014, 2014 IEEE Energy Conversion Congress and Exposition (ECCE).

[9]  Francisco Antunes,et al.  Losses comparison among carrier-based PWM modulation strategies in three-level neutral-point-clamped inverter , 2011 .

[10]  H. Ohsaki,et al.  Back-to-back converter design and control for synchronous generator-based wind turbines , 2012, 2012 International Conference on Renewable Energy Research and Applications (ICRERA).

[11]  Tore Undeland,et al.  Multilevel converters for a 10 MW, 100 kV transformer-less offshore wind generator system , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[12]  Johann W. Kolar,et al.  Comparative Evaluation of Advanced Three-Phase Three-Level Inverter/Converter Topologies Against Two-Level Systems , 2013, IEEE Transactions on Industrial Electronics.

[13]  Peter Tavner,et al.  Reliability of wind turbine subassemblies , 2009 .

[14]  Nabeel A. O. Demerdash,et al.  Application and losses analysis of ANPC converters in doubly-fed induction generator wind energy conversion system , 2013, 2013 International Electric Machines & Drives Conference.

[15]  Sidney Gierschner,et al.  Lifetime Estimation of the BIGT in ANPC Converter and T-Type Converter for Wind Energy Application , 2016 .

[16]  Frede Blaabjerg,et al.  Evaluation and Design Tools for the Reliability of Wind Power Converter System , 2015 .

[17]  Josef Lutz,et al.  Model for Power Cycling lifetime of IGBT Modules - various factors influencing lifetime , 2008 .

[18]  D. Floricau,et al.  Natural doubling of the apparent switching frequency using three-level ANPC converter , 2008, 2008 International School on Nonsinusoidal Currents and Compensation.

[19]  Bin Wu,et al.  Recent Advances and Industrial Applications of Multilevel Converters , 2010, IEEE Transactions on Industrial Electronics.

[20]  M. Liserre,et al.  Power electronics converters for wind turbine systems , 2011, 2011 IEEE Energy Conversion Congress and Exposition.

[21]  Ke Ma.  Thermal " Loading " and " Lifetime " Estimation " for " Power " Device " Considering " Mission " Profiles " in " Wind " Power " Converter " , 2014 .

[22]  Frede Blaabjerg,et al.  A review of failure mechanisms in wind turbine generator systems , 2015, 2015 17th European Conference on Power Electronics and Applications (EPE'15 ECCE-Europe).

[23]  Frede Blaabjerg,et al.  Multilevel converters for 10 MW Wind Turbines , 2011, Proceedings of the 2011 14th European Conference on Power Electronics and Applications.

[24]  Fang Zheng Peng,et al.  Multilevel converters-a new breed of power converters , 1995, IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting.

[25]  Pedro Rodriguez,et al.  A New PWM Strategy for Grid-Connected Half-Bridge Active NPC Converters With Losses Distribution Balancing Mechanism , 2015, IEEE Transactions on Power Electronics.

[26]  Marco Liserre,et al.  Overview of Multi-MW Wind Turbines and Wind Parks , 2011, IEEE Transactions on Industrial Electronics.

[27]  Jan Wenske,et al.  Converter Lifetime Assessment for Doubly-Fed Induction Generators Considering Derating Control Strategies at Low Rotor Frequencies , 2016 .

[28]  Ke Ma.  Promising Topologies and Power Devices for Wind Power Converter , 2015 .