A Review of 3D Printing Technologies for Soft Polymer Materials

[1]  Geoffrey M Spinks,et al.  Three-dimensional printing fiber reinforced hydrogel composites. , 2014, ACS applied materials & interfaces.

[2]  D. Floreano,et al.  Soft Robotic Grippers , 2018, Advanced materials.

[3]  Colleen L Flanagan,et al.  Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering. , 2005, Biomaterials.

[4]  Jungho Hwang,et al.  Drop-on-demand hybrid printing using a piezoelectric MEMS printhead at various waveforms, high voltages and jetting frequencies , 2013 .

[5]  Hongbo Lan,et al.  A theoretical model for predicting the feature size printed by electrohydrodynamic jet printing , 2018 .

[6]  Jacqueline Kort-Mascort,et al.  Extrusion bioprinting of soft materials: An emerging technique for biological model fabrication , 2019, Applied Physics Reviews.

[7]  Roberto Parra-Saldivar,et al.  Digitally Tunable Microfluidic Bioprinting of Multilayered Cannular Tissues , 2018, Advanced materials.

[8]  Z. Suo,et al.  Highly stretchable and tough hydrogels , 2012, Nature.

[9]  D. Rus,et al.  Design, fabrication and control of soft robots , 2015, Nature.

[10]  Jianzhong Fu,et al.  All‐Printed Flexible and Stretchable Electronics with Pressing or Freezing Activatable Liquid‐Metal–Silicone Inks , 2019, Advanced Functional Materials.

[11]  Wuyi Zhou,et al.  Bioactive and Biocompatible Macroporous Scaffolds with Tunable Performances Prepared Based on 3D Printing of the Pre‐Crosslinked Sodium Alginate/Hydroxyapatite Hydrogel Ink , 2019, Macromolecular Materials and Engineering.

[12]  T. Hanemann,et al.  Influence of Al2O3 Nanoparticle Addition on a UV Cured Polyacrylate for 3D Inkjet Printing , 2019, Polymers.

[13]  Amir Hosein Sakhaei,et al.  Highly Stretchable and UV Curable Elastomers for Digital Light Processing Based 3D Printing , 2017, Advanced materials.

[14]  Frederik L. Giesel,et al.  3D printing based on imaging data: review of medical applications , 2010, International Journal of Computer Assisted Radiology and Surgery.

[15]  Y. Li,et al.  Deterministically patterned biomimetic human iPSC-derived hepatic model via rapid 3D bioprinting , 2016, Proceedings of the National Academy of Sciences.

[16]  F. Klocke,et al.  Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[17]  Ralph Müller,et al.  Tunable hydrogel composite with two-step processing in combination with innovative hardware upgrade for cell-based three-dimensional bioprinting. , 2014, Acta biomaterialia.

[18]  Xuanhe Zhao,et al.  Multi-scale multi-mechanism design of tough hydrogels: building dissipation into stretchy networks. , 2014, Soft matter.

[19]  J. Rogers,et al.  Mechanisms, Capabilities, and Applications of High-Resolution Electrohydrodynamic Jet Printing. , 2015, Small.

[20]  R. Liska,et al.  The formulator's guide to anti-oxygen inhibition additives , 2014 .

[21]  R. Ritchie,et al.  Bioinspired structural materials. , 2014, Nature Materials.

[22]  S. Magdassi,et al.  Conductive nanomaterials for 2D and 3D printed flexible electronics. , 2019, Chemical Society reviews.

[23]  Ningbin Zhang,et al.  Fast‐Response, Stiffness‐Tunable Soft Actuator by Hybrid Multimaterial 3D Printing , 2019, Advanced Functional Materials.

[24]  Biqiong Chen,et al.  A self-healing, adaptive and conductive polymer composite ink for 3D printing of gas sensors , 2018 .

[25]  Jianzhong Fu,et al.  Evaluation of carbon fiber-embedded 3D printed structures for strengthening and structural-health monitoring , 2017 .

[26]  J. Cesarano,et al.  Directed colloidal assembly of 3D periodic structures , 2002 .

[27]  Yang Guo,et al.  Inkjet and inkjet-based 3D printing: connecting fluid properties and printing performance , 2017 .

[28]  Chee Kai Chua,et al.  Melt flow behaviour of poly-ε-caprolactone in fused deposition modelling , 2008 .

[29]  Doyoung Byun,et al.  3D printing of high-resolution PLA-based structures by hybrid electrohydrodynamic and fused deposition modeling techniques , 2016 .

[30]  Sheng Xu,et al.  Materials and Structures toward Soft Electronics , 2018, Advanced materials.

[31]  Julie L. P. Jessop,et al.  Decreased oxygen inhibition in photopolymerized acrylate/epoxide hybrid polymer coatings as demonstrated by Raman spectroscopy , 2006 .

[32]  Thomas J. Wallin,et al.  3D printing antagonistic systems of artificial muscle using projection stereolithography , 2015, Bioinspiration & biomimetics.

[33]  Rebecca K. Kramer,et al.  Direct Writing of Gallium‐Indium Alloy for Stretchable Electronics , 2014 .

[34]  O. Velev,et al.  3D‐Printed Silicone Soft Architectures with Programmed Magneto‐Capillary Reconfiguration , 2019, Advanced Materials Technologies.

[35]  Jianzhong Fu,et al.  Printing 3D microfluidic chips with a 3D sugar printer , 2015 .

[36]  J. Lewis,et al.  3D Bioprinting of Vascularized, Heterogeneous Cell‐Laden Tissue Constructs , 2014, Advanced materials.

[37]  Vladimir Mironov,et al.  Review: bioprinting: a beginning. , 2006, Tissue engineering.

[38]  W. Gregory Sawyer,et al.  Self-assembled micro-organogels for 3D printing silicone structures , 2017, Science Advances.

[39]  W. Cong,et al.  Additive manufacturing of carbon fiber reinforced thermoplastic composites using fused deposition modeling , 2015 .

[40]  Daniel Therriault,et al.  Processing parameters investigation for the fabrication of self-supported and freeform polymeric microstructures using ultraviolet-assisted three-dimensional printing , 2014 .

[41]  S. Yao,et al.  Nanomaterial‐Enabled Stretchable Conductors: Strategies, Materials and Devices , 2015, Advanced materials.

[42]  Yifan Guo,et al.  A general strategy of 3D printing thermosets for diverse applications , 2019, Materials Horizons.

[43]  B. Derby,et al.  Manufacture of 3-dimensional objects by reactive inkjet printing , 2008 .

[44]  Michael C. McAlpine,et al.  3D Printed Stem‐Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds , 2018, Advanced functional materials.

[45]  Liliang Ouyang,et al.  3D printing of photocurable poly(glycerol sebacate) elastomers , 2016, Biofabrication.

[46]  Z. Suo,et al.  Fatigue-Resistant elastomers , 2020 .

[47]  Joon Hyung Park,et al.  Three-dimensional printing of complex biological structures by freeform reversible embedding of suspended hydrogels , 2015, Science Advances.

[48]  Zhifeng Ren,et al.  Flexible Electronics: Stretchable Electrodes and Their Future , 2018, Advanced Functional Materials.

[49]  Chor Yen Yap,et al.  Review of selective laser melting : materials and applications , 2015 .

[50]  Shawn A. Chester,et al.  Printing ferromagnetic domains for untethered fast-transforming soft materials , 2018, Nature.

[51]  Yong Huang,et al.  Self-Supporting Nanoclay as Internal Scaffold Material for Direct Printing of Soft Hydrogel Composite Structures in Air. , 2017, ACS applied materials & interfaces.

[52]  J. Lewis,et al.  Architected Polymer Foams via Direct Bubble Writing , 2019, Advanced materials.

[53]  Manuel Schaffner,et al.  3D printing of robotic soft actuators with programmable bioinspired architectures , 2018, Nature Communications.

[54]  D J Mooney,et al.  Alginate hydrogels as synthetic extracellular matrix materials. , 1999, Biomaterials.

[55]  Liang Hou,et al.  Additive manufacturing and its societal impact: a literature review , 2013 .

[56]  K. McDonnell,et al.  Fabrication of Continuous Carbon, Glass and Kevlar fibre reinforced polymer composites using Additive Manufacturing , 2017 .

[57]  M. Layani,et al.  UV crosslinkable emulsions with silver nanoparticles for inkjet printing of conductive 3D structures , 2013 .

[58]  Jung Woo Lee,et al.  Soft network composite materials with deterministic and bio-inspired designs , 2015, Nature Communications.

[59]  Matteo Cianchetti,et al.  Soft robotics: Technologies and systems pushing the boundaries of robot abilities , 2016, Science Robotics.

[60]  Jeffrey Bokor,et al.  Maskless lithography using drop-on-demand inkjet printing method , 2004, SPIE Advanced Lithography.

[61]  Xiaofeng Cui,et al.  Inkjet-bioprinted acrylated peptides and PEG hydrogel with human mesenchymal stem cells promote robust bone and cartilage formation with minimal printhead clogging. , 2015, Biotechnology journal.

[62]  Suwan N Jayasinghe,et al.  Electrohydrodynamic jet processing: an advanced electric-field-driven jetting phenomenon for processing living cells. , 2006, Small.

[63]  Thomas J. Wallin,et al.  Highly Elastic, Transparent, and Conductive 3D‐Printed Ionic Composite Hydrogels , 2017 .

[64]  L. Love,et al.  Highly oriented carbon fiber–polymer composites via additive manufacturing , 2014 .

[65]  L. Gibson.  The hierarchical structure and mechanics of plant materials , 2012, Journal of The Royal Society Interface.

[66]  L. Froyen,et al.  Binding Mechanisms in Selective Laser Sintering and Selective Laser Melting , 2004 .

[67]  Kai Li,et al.  3D Printing of Free‐Standing Stretchable Electrodes with Tunable Structure and Stretchability , 2017 .

[68]  Z. Suo,et al.  Printing Hydrogels and Elastomers in Arbitrary Sequence with Strong Adhesion , 2019, Advanced Functional Materials.

[69]  Krassimir Dotchev,et al.  Recycling of polyamide 12 based powders in the laser sintering process , 2009 .

[70]  Jordan S. Miller,et al.  Open-Source Selective Laser Sintering (OpenSLS) of Nylon and Biocompatible Polycaprolactone , 2016, PloS one.

[71]  S. Ramakrishna,et al.  Melt-Electrospun Fibers for Advances in Biomedical Engineering, Clean Energy, Filtration, and Separation , 2011 .

[72]  M. Buehler,et al.  Tough Composites Inspired by Mineralized Natural Materials: Computation, 3D printing, and Testing , 2013 .

[73]  Gideon Levy,et al.  RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING (LM) TECHNOLOGIES, STATE OF THE ART AND FUTURE PERSPECTIVES , 2003 .

[74]  Thomas Braschler,et al.  Microdrop Printing of Hydrogel Bioinks into 3D Tissue‐Like Geometries , 2012, Advanced materials.

[75]  Noshir A. Langrana,et al.  Structural quality of parts processed by fused deposition , 1996 .

[76]  Brian N. Turner,et al.  A review of melt extrusion additive manufacturing processes: II. Materials, dimensional accuracy, and surface roughness , 2015 .

[77]  Qifa Zhou,et al.  Biomimetic Anisotropic Reinforcement Architectures by Electrically Assisted Nanocomposite 3D Printing , 2017, Advanced materials.

[78]  Yanqiu Chen,et al.  3D printing of a mechanically durable superhydrophobic porous membrane for oil–water separation , 2017 .

[79]  Steven A Soper,et al.  Thermoplastic nanofluidic devices for biomedical applications. , 2017, Lab on a chip.

[80]  J. E. Fromm,et al.  Numerical calculation of the fluid dynamics of drop-on-demand jets , 1984 .

[81]  Animesh Agrawal,et al.  Strong fiber-reinforced hydrogel. , 2013, Acta biomaterialia.

[82]  Daniel M. Vogt,et al.  Soft Somatosensitive Actuators via Embedded 3D Printing , 2018, Advanced materials.

[83]  Yanlin Song,et al.  Controllable Printing Droplets for High‐Resolution Patterns , 2014, Advanced materials.

[84]  Maxim Shusteff,et al.  Volumetric additive manufacturing via tomographic reconstruction , 2019, Science.

[85]  Heinrich M. Jaeger,et al.  Universal robotic gripper based on the jamming of granular material , 2010, Proceedings of the National Academy of Sciences.

[86]  Xuanhe Zhao,et al.  Ferromagnetic soft continuum robots , 2019, Science Robotics.

[87]  WangDong,et al.  High-Efficiency High-Resolution Multimaterial Fabrication for Digital Light Processing-Based Three-Dimensional Printing , 2018 .

[88]  D. Fang,et al.  Hydrophilic/Hydrophobic Composite Shape-Shifting Structures. , 2018, ACS applied materials & interfaces.

[89]  C. Chu,et al.  Synthesis, characterization and controlled drug release of thermosensitive IPN-PNIPAAm hydrogels. , 2004, Biomaterials.

[90]  S. Kotha,et al.  Micromechanical model of nacre tested in tension , 2001 .

[91]  M. Mehrali,et al.  A review on powder-based additive manufacturing for tissue engineering: selective laser sintering and inkjet 3D printing , 2015, Science and technology of advanced materials.

[92]  Sebastien G M Uzel,et al.  Biomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels , 2019, Science Advances.

[93]  Zachary W. Ulissi,et al.  Active learning across intermetallics to guide discovery of electrocatalysts for CO2 reduction and H2 evolution , 2018, Nature Catalysis.

[94]  A. Todoroki,et al.  Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation , 2016, Scientific Reports.

[95]  Shintaroh Iwanaga,et al.  Three-dimensional inkjet biofabrication based on designed images , 2011, Biofabrication.

[96]  B. Derby.  Inkjet Printing of Functional and Structural Materials: Fluid Property Requirements, Feature Stability, and Resolution , 2010 .

[97]  S. Yoo,et al.  Creating perfused functional vascular channels using 3D bio-printing technology. , 2014, Biomaterials.

[98]  P. Calvert.  Inkjet Printing for Materials and Devices , 2001 .

[99]  Jinsong Leng,et al.  CNT-based electro-responsive shape memory functionalized 3D printed nanocomposites for liquid sensors , 2019 .

[100]  S. Weiner,et al.  Lamellar bone: structure-function relations. , 1999, Journal of structural biology.

[101]  X. Duan,et al.  Two-photon polymerization microfabrication of hydrogels: an advanced 3D printing technology for tissue engineering and drug delivery. , 2015, Chemical Society reviews.

[102]  Gareth H. McKinley,et al.  Anti-fatigue-fracture hydrogels , 2018, Science Advances.

[103]  A. Khademhosseini,et al.  Microfluidic Bioprinting of Heterogeneous 3D Tissue Constructs Using Low‐Viscosity Bioink , 2016, Advanced materials.

[104]  Ryan P. Adams,et al.  Design of efficient molecular organic light-emitting diodes by a high-throughput virtual screening and experimental approach. , 2016, Nature materials.

[105]  E. Zolotoyabko,et al.  Microstructure of natural plywood-like ceramics: a study by high-resolution electron microscopy and energy-variable X-ray diffraction , 2003 .

[106]  Qifa Zhou,et al.  Three dimensional printing of high dielectric capacitor using projection based stereolithography method , 2016 .

[107]  Ryan Wicker,et al.  Multiprocess 3D printing for increasing component functionality , 2016, Science.

[108]  Duc Truong Pham,et al.  A comparison of rapid prototyping technologies , 1998 .

[109]  J. Lewis,et al.  3D‐Printing of Lightweight Cellular Composites , 2014, Advanced materials.

[110]  Andrew G. Alleyne,et al.  A multimaterial electrohydrodynamic jet (E-jet) printing system , 2012 .

[111]  Jian Zhang,et al.  Effect of core–shell composite particles on the sintering behavior and properties of nano-Al2O3/polystyrene composite prepared by SLS , 2006 .

[112]  W. Świȩszkowski,et al.  Microfluidic-enhanced 3D bioprinting of aligned myoblast-laden hydrogels leads to functionally organized myofibers in vitro and in vivo. , 2017, Biomaterials.

[113]  Randall M. Erb,et al.  Actuating Soft Matter with Magnetic Torque , 2016 .

[114]  D. Hutmacher,et al.  Biologically Inspired Scaffolds for Heart Valve Tissue Engineering via Melt Electrowriting. , 2019, Small.

[115]  Sung Kyu Park,et al.  Recent Progress of Textile-Based Wearable Electronics: A Comprehensive Review of Materials, Devices, and Applications. , 2018, Small.

[116]  T. Dvir,et al.  3D Printing of Personalized Thick and Perfusable Cardiac Patches and Hearts , 2019, Advanced science.

[117]  Francesco Barbieri,et al.  Preparation of an aqueous graphitic ink for thermal drop-on-demand inkjet printing , 2016 .

[118]  Ibrahim T. Ozbolat,et al.  Bioprinting functional tissues. , 2019, Acta biomaterialia.

[119]  André R Studart,et al.  Additive manufacturing of biologically-inspired materials. , 2016, Chemical Society reviews.

[120]  C. Macosko,et al.  Oxygen inhibition in differential scanning calorimetry of free radical polymerization , 1990 .

[121]  Shannon E Bakarich,et al.  3D Printing of Transparent and Conductive Heterogeneous Hydrogel–Elastomer Systems , 2017, Advanced materials.

[122]  J. Lewis,et al.  Acoustophoretic printing , 2018, Science Advances.

[123]  Marcel A. Heinrich,et al.  Rapid Continuous Multimaterial Extrusion Bioprinting , 2017, Advanced materials.

[124]  Garrett W. Melenka,et al.  Evaluation and prediction of the tensile properties of continuous fiber-reinforced 3D printed structures , 2016 .

[125]  Min Wang,et al.  Selective laser sintering of porous tissue engineering scaffolds from poly(l-lactide)/carbonated hydroxyapatite nanocomposite microspheres , 2008, Journal of materials science. Materials in medicine.

[126]  Michael C. McAlpine,et al.  3D Printed Electrically-Driven Soft Actuators. , 2018, Extreme Mechanics Letters.

[127]  Jiankang He,et al.  Micro/nanoscale electrohydrodynamic printing: from 2D to 3D. , 2016, Nanoscale.

[128]  K. Costa,et al.  3D Printing a Mechanically-Tunable Acrylate Resin on a Commercial DLP-SLA Printer. , 2018, Additive manufacturing.

[129]  Christian Decker,et al.  UV-radiation curing of acrylate/epoxide systems , 2001 .

[130]  L. Mathias,et al.  Synthesis and Thermal Behavior of Polyamide 12,T Random and Block Copolymers , 2012 .

[131]  Jianzhong Fu,et al.  Sacrificial microgel-laden bioink-enabled 3D bioprinting of mesoscale pore networks , 2020 .

[132]  R. Hassan,et al.  Reinforcement of poly(vinyl alcohol) hydrogel with halloysite nanotubes as potential biomedical materials , 2017 .

[133]  Jianzhong Fu,et al.  4D Printing of High Performance Thermal Responsive Liquid Metal Elastomers Driven by Embedded Micro Liquid Chambers. , 2020, ACS applied materials & interfaces.

[134]  E. Duoss,et al.  3D printed cellular solid outperforms traditional stochastic foam in long-term mechanical response , 2016, Scientific Reports.

[135]  Pengfei Zhu,et al.  4D Printing of Complex Structures with a Fast Response Time to Magnetic Stimulus. , 2018, ACS applied materials & interfaces.

[136]  Samuel Rosset,et al.  Inkjet 3D printing of UV and thermal cure silicone elastomers for dielectric elastomer actuators , 2017 .

[137]  Jae Hwan Jeong,et al.  Electrically Conducting and Mechanically Strong Graphene-Polylactic Acid Composites for 3D Printing. , 2019, ACS applied materials & interfaces.

[138]  Hyeongjin Lee,et al.  A New Approach for Fabricating Collagen/ECM‐Based Bioinks Using Preosteoblasts and Human Adipose Stem Cells , 2015, Advanced healthcare materials.

[139]  D. Drummer,et al.  Development of a characterization approach for the sintering behavior of new thermoplastics for selective laser sintering , 2010 .

[140]  Mark A. Skylar-Scott,et al.  Three-dimensional bioprinting of thick vascularized tissues , 2016, Proceedings of the National Academy of Sciences.

[141]  Robert J. Wood,et al.  An integrated design and fabrication strategy for entirely soft, autonomous robots , 2016, Nature.

[142]  Feng Zhou,et al.  3D Printing of Photocuring Elastomers with Excellent Mechanical Strength and Resilience. , 2019, Macromolecular rapid communications.

[143]  J. Vacanti,et al.  Tissue engineering. , 1993, Science.

[144]  Yuri Estrin,et al.  Enhanced Mechanical Performance of Bio-Inspired Hybrid Structures Utilising Topological Interlocking Geometry , 2016, Scientific Reports.

[145]  Gabriel Popescu,et al.  High‐Resolution Projection Microstereolithography for Patterning of Neovasculature , 2016, Advanced healthcare materials.

[146]  Yuhao Liu,et al.  Lab-on-Skin: A Review of Flexible and Stretchable Electronics for Wearable Health Monitoring. , 2017, ACS nano.

[147]  Jianzhong Fu,et al.  3D Bioprinting of Low-Concentration Cell-Laden Gelatin Methacrylate (GelMA) Bioinks with a Two-Step Cross-linking Strategy. , 2018, ACS applied materials & interfaces.

[148]  M Paturzo,et al.  Dispensing nano-pico droplets and liquid patterning by pyroelectrodynamic shooting. , 2010, Nature nanotechnology.

[149]  J. Lewis,et al.  Printing soft matter in three dimensions , 2016, Nature.

[150]  Z. Suo,et al.  Stretchable materials of high toughness and low hysteresis , 2019, Proceedings of the National Academy of Sciences.

[151]  Jongseung Yoon,et al.  Bioinspired Functional Surfaces Enabled by Multiscale Stereolithography , 2019, Advanced Materials Technologies.

[152]  N. Moszner,et al.  New Photocleavable Structures. Diacylgermane-Based Photoinitiators for Visible Light Curing , 2008 .

[153]  Yonggang Huang,et al.  Materials and Mechanics for Stretchable Electronics , 2010, Science.

[154]  Christopher Saldana,et al.  Porous polymeric materials by 3D printing of photocurable resin , 2017 .

[155]  D. Therriault,et al.  3D Printing of Highly Conductive Nanocomposites for the Functional Optimization of Liquid Sensors. , 2016, Small.

[156]  Christopher B. Williams,et al.  Functional siloxanes with photo-activated, simultaneous chain extension and crosslinking for lithography-based 3D printing , 2018, Polymer.

[157]  Michael C. McAlpine,et al.  3D Printed Bionic Ears , 2013, Nano letters.

[158]  John R. Tumbleston,et al.  Continuous liquid interface production of 3D objects , 2015, Science.

[159]  P. Dalton,et al.  Dimension-Based Design of Melt Electrowritten Scaffolds. , 2018, Small.

[160]  J. R. Raney,et al.  Rotational 3D printing of damage-tolerant composites with programmable mechanics , 2018, Proceedings of the National Academy of Sciences.

[161]  Simon W. Jones,et al.  Suspended Manufacture of Biological Structures , 2017 .

[162]  J. Lewis,et al.  3D Printing of Interdigitated Dielectric Elastomer Actuators , 2019, Advanced Functional Materials.

[163]  Geoffrey Ingram Taylor,et al.  Disintegration of water drops in an electric field , 1964, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[164]  F. Barthelat,et al.  On the mechanics of mother-of-pearl: a key feature in the material hierarchical structure , 2007 .

[165]  Jamie M. Messman,et al.  3D Printing Amorphous Polysiloxane Terpolymers via Vat Photopolymerization , 2019, Macromolecular Chemistry and Physics.

[166]  Daining Fang,et al.  Grayscale digital light processing 3D printing for highly functionally graded materials , 2019, Science Advances.

[167]  Pulak M. Pandey,et al.  Influence of building strategies on the accuracy of parts in selective laser sintering , 2009 .

[168]  Li Wen,et al.  Hydrodynamic function of biomimetic shark skin: effect of denticle pattern and spacing , 2015, Bioinspiration & biomimetics.

[169]  Youlun Xiong,et al.  Electrohydrodynamic direct-writing. , 2013, Nanoscale.

[170]  Yong He,et al.  Multi-Material 3D Printing of Highly Stretchable Silicone Elastomer. , 2019, ACS applied materials & interfaces.

[171]  Daniel M. Vogt,et al.  Embedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers , 2014, Advanced materials.

[172]  Yingguang Li,et al.  Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing , 2016 .

[173]  Qiang Zhu,et al.  Predicting phase behavior of grain boundaries with evolutionary search and machine learning , 2017, Nature Communications.

[174]  J. Greener,et al.  Three-dimensional shape transformations of hydrogel sheets induced by small-scale modulation of internal stresses , 2013, Nature Communications.

[175]  Xin Wang,et al.  3D printing of polymer matrix composites: A review and prospective , 2017 .

[176]  J. Malda,et al.  Simultaneous Micropatterning of Fibrous Meshes and Bioinks for the Fabrication of Living Tissue Constructs , 2018, Advanced healthcare materials.

[177]  Krishnendu Roy,et al.  A digital micro-mirror device-based system for the microfabrication of complex, spatially patterned tissue engineering scaffolds. , 2006, Journal of biomedical materials research. Part A.

[178]  Mark A. Skylar-Scott,et al.  Voxelated soft matter via multimaterial multinozzle 3D printing , 2019, Nature.

[179]  Jun Yeob Song,et al.  High‐Resolution Printing of 3D Structures Using an Electrohydrodynamic Inkjet with Multiple Functional Inks , 2015, Advanced materials.

[180]  Paolo Dario,et al.  Biomedical applications of soft robotics , 2018, Nature Reviews Materials.

[181]  Qifa Zhou,et al.  Recent Progress in Biomimetic Additive Manufacturing Technology: From Materials to Functional Structures , 2018, Advanced materials.

[182]  James V. Crivello,et al.  Complex triarylsulfonium salt photoinitiators. I. The identification, characterization, and syntheses of a new class of triarylsulfonium salt photoinitiators , 1980 .

[183]  Sijun Liu,et al.  Ultrastretchable and Self-Healing Double-Network Hydrogel for 3D Printing and Strain Sensor. , 2017, ACS applied materials & interfaces.

[184]  Suman Das,et al.  Mechanical and microstructural properties of Nylon-12/carbon black composites: Selective laser sintering versus melt compounding and injection molding , 2011 .

[185]  G. Spinks,et al.  4D Printing of Reversible Shape Morphing Hydrogel Structures , 2017 .

[186]  Amir Hosein Sakhaei,et al.  Highly stretchable hydrogels for UV curing based high-resolution multimaterial 3D printing. , 2018, Journal of materials chemistry. B.

[187]  Nicholas X. Fang,et al.  Projection micro-stereolithography using digital micro-mirror dynamic mask , 2005 .

[188]  H. Kodama.  Automatic method for fabricating a three‐dimensional plastic model with photo‐hardening polymer , 1981 .

[189]  Terry S. Creasy,et al.  Selective laser sintering characteristics of nylon 6/clay-reinforced nanocomposite , 2004 .

[190]  Liang Ma,et al.  Coaxial nozzle-assisted 3D bioprinting with built-in microchannels for nutrients delivery. , 2015, Biomaterials.

[191]  Hon Fai Chan,et al.  3D Printing of Highly Stretchable and Tough Hydrogels into Complex, Cellularized Structures , 2015, Advanced materials.

[192]  Won-Gun Koh,et al.  Biomimetic strain hardening in interpenetrating polymer network hydrogels , 2007 .

[193]  Hui Lin,et al.  Why choose 3D bioprinting? Part II: methods and bioprinters , 2020, Bio-Design and Manufacturing.

[194]  Gabriel Villar,et al.  A Tissue-Like Printed Material , 2013, Science.

[195]  Nancy R. Sottos,et al.  Multidimensional Vascularized Polymers using Degradable Sacrificial Templates , 2015 .

[196]  Pierre-Emile Duhamel,et al.  Progress in the development of interpenetrating polymer network hydrogels. , 2008, Polymers for advanced technologies.

[197]  Shi Yusheng,et al.  A Nanosilica/Nylon-12 Composite Powder for Selective Laser Sintering , 2009 .

[198]  Matthias P Lutolf,et al.  3D Inkjet Printing of Complex, Cell-Laden Hydrogel Structures , 2018, Scientific Reports.

[199]  Damien Loterie,et al.  Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds , 2019, Advanced materials.

[200]  Thomas J Ober,et al.  Microfluidic Printheads for Multimaterial 3D Printing of Viscoelastic Inks , 2015, Advanced materials.

[201]  M. Mickle,et al.  Formulation and processing of novel conductive solution inks in continuous inkjet printing of 3-D electric circuits , 2005, IEEE Transactions on Electronics Packaging Manufacturing.

[202]  F. Melchels,et al.  Proposal to assess printability of bioinks for extrusion-based bioprinting and evaluation of rheological properties governing bioprintability , 2017, Biofabrication.

[203]  Eneko Axpe,et al.  Applications of Alginate-Based Bioinks in 3D Bioprinting , 2016, International journal of molecular sciences.

[204]  R. Mülhaupt,et al.  Polymers for 3D Printing and Customized Additive Manufacturing , 2017, Chemical reviews.

[205]  Robert J. Wood,et al.  A 3D-printed, functionally graded soft robot powered by combustion , 2015, Science.

[206]  Konrad Wegener,et al.  Materials perspective of polymers for additive manufacturing with selective laser sintering , 2014 .

[207]  David Espalin,et al.  Multi-material, multi-technology FDM: exploring build process variations , 2014 .

[208]  G. Lauder,et al.  Biomimetic shark skin: design, fabrication and hydrodynamic function , 2014, Journal of Experimental Biology.

[209]  Honglei Guo,et al.  Oppositely Charged Polyelectrolytes Form Tough, Self‐Healing, and Rebuildable Hydrogels , 2015, Advanced materials.

[210]  Howard A Stone,et al.  Viscoplastic Matrix Materials for Embedded 3D Printing. , 2018, ACS applied materials & interfaces.

[211]  Yong Huang,et al.  Evaluation of bioink printability for bioprinting applications , 2018, Applied Physics Reviews.

[212]  Yong He,et al.  Synchronous 3D Bioprinting of Large‐Scale Cell‐Laden Constructs with Nutrient Networks , 2019, Advanced healthcare materials.

[213]  Sourabh K. Saha,et al.  Scalable submicrometer additive manufacturing , 2019, Science.

[214]  M. Panhuis,et al.  An overview of the suitability of hydrogel-forming polymers for extrusion-based 3D-printing. , 2015, Journal of materials chemistry. B.

[215]  Insang You,et al.  Material approaches to stretchable strain sensors. , 2015, Chemphyschem : a European journal of chemical physics and physical chemistry.

[216]  Charlie C. L. Wang,et al.  Towards Behavior Design of a 3D-Printed Soft Robotic Hand , 2017 .

[217]  Les A. Piegl,et al.  Ten challenges in 3D printing , 2015, Engineering with Computers.

[218]  Gideon Levy,et al.  Influence of the particle size distribution on surface quality and mechanical properties in AM steel parts , 2011 .

[219]  Daniel M. Vogt,et al.  Capacitive Soft Strain Sensors via Multicore–Shell Fiber Printing , 2015, Advanced materials.

[220]  D. Hwang,et al.  Inkjet–Spray Hybrid Printing for 3D Freeform Fabrication of Multilayered Hydrogel Structures , 2018, Advanced healthcare materials.

[221]  Randall M. Erb,et al.  Designing bioinspired composite reinforcement architectures via 3D magnetic printing , 2015, Nature Communications.

[222]  A. Khademhosseini,et al.  Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels. , 2015, Biomaterials.

[223]  A. Woolley,et al.  Custom 3D printer and resin for 18 μm × 20 μm microfluidic flow channels. , 2017, Lab on a chip.

[224]  M. Edirisinghe,et al.  Electric-field driven jetting from dielectric liquids , 2004 .

[225]  R. Advíncula,et al.  Mechanically Robust, Ultraelastic Hierarchical Foam with Tunable Properties via 3D Printing , 2018 .

[226]  H. Sirringhaus,et al.  High-Resolution Ink-Jet Printing of All-Polymer Transistor Circuits , 2000, Science.

[227]  Jianzhong Fu,et al.  Bioprinting of Cell‐Laden Microfiber: Can It Become a Standard Product? , 2019, Advanced healthcare materials.

[228]  Nadim S Hmeidat,et al.  High-strength epoxy nanocomposites for 3D printing , 2018 .

[229]  Jianzhong Fu,et al.  Interfacial bonding during multi-material fused deposition modeling (FDM) process due to inter-molecular diffusion , 2018, Materials & Design.

[230]  Bagrat Grigoryan,et al.  Multivascular networks and functional intravascular topologies within biocompatible hydrogels , 2019, Science.

[231]  Fei Gao,et al.  3D-Printed High Strength Bioactive Supramolecular Polymer/Clay Nanocomposite Hydrogel Scaffold for Bone Regeneration. , 2017, ACS biomaterials science & engineering.

[232]  J. R. Raney,et al.  Hybrid 3D Printing of Soft Electronics , 2017, Advanced materials.

[233]  R. Leask,et al.  Design of a 3D printer head for additive manufacturing of sugar glass for tissue engineering applications , 2017 .

[234]  R. Hague,et al.  A new photocrosslinkable polycaprolactone-based ink for three-dimensional inkjet printing. , 2017, Journal of biomedical materials research. Part B, Applied biomaterials.

[235]  Xuanhe Zhao,et al.  A New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks , 2018, Advanced materials.

[236]  Z. Suo,et al.  Bonding dissimilar polymer networks in various manufacturing processes , 2018, Nature Communications.

[237]  Christian M. Siket,et al.  Instant tough bonding of hydrogels for soft machines and electronics , 2017, Science Advances.

[238]  Yu Jun Tan,et al.  A strategy for strong interface bonding by 3D bioprinting of oppositely charged κ-carrageenan and gelatin hydrogels. , 2018, Carbohydrate polymers.

[239]  D. Poulikakos,et al.  Direct printing of nanostructures by electrostatic autofocussing of ink nanodroplets , 2012, Nature Communications.

[240]  Hwa-Yaw Tam,et al.  Rapid 3D Patterning of Poly(acrylic acid) Ionic Hydrogel for Miniature pH Sensors , 2016, Advanced materials.

[241]  Ph. Niedermann,et al.  A novel thick photoresist for microsystem technology , 2003 .

[242]  André R Studart,et al.  Composites Reinforced in Three Dimensions by Using Low Magnetic Fields , 2012, Science.

[243]  Xueyi Wan,et al.  Rapid 3D bioprinting of decellularized extracellular matrix with regionally varied mechanical properties and biomimetic microarchitecture. , 2018, Biomaterials.

[244]  Shabir Hassan,et al.  Aqueous Two‐Phase Emulsion Bioink‐Enabled 3D Bioprinting of Porous Hydrogels , 2018, Advanced materials.

[245]  Jianzhong Fu,et al.  Self-monitoring continuous carbon fiber reinforced thermoplastic based on dual-material three-dimensional printing integration process , 2018, Carbon.

[246]  Wei Gao,et al.  Wearable and flexible electronics for continuous molecular monitoring. , 2019, Chemical Society reviews.

[247]  Qifa Zhou,et al.  Electrically assisted 3D printing of nacre-inspired structures with self-sensing capability , 2019, Science Advances.

[248]  P. Jay,et al.  Influence of the Nozzle Shape on the Breakup Behavior of Continuous Ink Jets , 2018 .

[249]  Robert J. Strong,et al.  A review of melt extrusion additive manufacturing processes: I. Process design and modeling , 2014 .

[250]  Jianzhong Fu,et al.  3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels. , 2017, ACS biomaterials science & engineering.

[251]  Takeo Watanabe,et al.  Some aspects of nonisothermal crystallization of polymers. I. Relationship between crystallization temperature, crystallinity, and cooling conditions , 1972 .

[252]  YapHong Kai,et al.  High-Force Soft Printable Pneumatics for Soft Robotic Applications , 2016 .

[253]  Peng Huang,et al.  3D bioprinting scaffold using alginate/polyvinyl alcohol bioinks , 2017 .

[254]  Desheng Kong,et al.  Omnidirectional Printing of Soft Elastomer for Liquid-State Stretchable Electronics. , 2019, ACS applied materials & interfaces.

[255]  A. Jakus,et al.  3D-printing porosity: A new approach to creating elevated porosity materials and structures. , 2018, Acta biomaterialia.

[256]  Arnan Mitchell,et al.  Liquid metal enabled microfluidics. , 2017, Lab on a chip.

[257]  Martine Dubé,et al.  Three‐Dimensional Printing of Multifunctional Nanocomposites: Manufacturing Techniques and Applications , 2016, Advanced materials.

[258]  M. Kokabi,et al.  Nanoclay Enhanced the Mechanical Properties of Poly(Vinyl Alcohol) /Chitosan /Montmorillonite Nanocomposite Hydrogel as Wound Dressing☆ , 2015 .

[259]  P. G. Campbell,et al.  3D bioprinting of collagen to rebuild components of the human heart , 2019, Science.

[260]  C. Highley,et al.  Direct 3D Printing of Shear‐Thinning Hydrogels into Self‐Healing Hydrogels , 2015, Advanced materials.

[261]  Sung-Jin Park,et al.  Instrumented cardiac microphysiological devices via multi-material 3D printing , 2016, Nature materials.

[262]  G. Whitesides,et al.  Soft Lithography. , 1998, Angewandte Chemie.

[263]  A. Studart,et al.  Multimaterial magnetically assisted 3D printing of composite materials , 2015, Nature Communications.

[264]  J. A. Lewis.  Direct Ink Writing of 3D Functional Materials , 2006 .

[265]  Sohyun Kim,et al.  Additive manufacturing of hydrogel-based materials for next-generation implantable medical devices , 2017, Science Robotics.

[266]  Brendon M. Baker,et al.  Rapid casting of patterned vascular networks for perfusable engineered 3D tissues , 2012, Nature materials.

[267]  S. Kanagaraj,et al.  4D printed porous radiopaque shape memory polyurethane for endovascular embolization , 2018, Additive Manufacturing.

[268]  Yong He,et al.  Three-Dimensional Printed Wearable Sensors with Liquid Metals for Detecting the Pose of Snakelike Soft Robots. , 2018, ACS applied materials & interfaces.

[269]  M. Heckele,et al.  Review on micro molding of thermoplastic polymers , 2004 .

[270]  John Evans,et al.  Metering and dispensing of powder; the quest for new solid freeforming techniques , 2007 .

[271]  Jianzhong Fu,et al.  Fiber-Based Mini Tissue with Morphology-Controllable GelMA Microfibers. , 2018, Small.

[272]  John J. Vericella,et al.  Three‐Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness , 2014 .

[273]  Ludger Overmeyer,et al.  UV laser direct writing of 2D/3D structures using photo-curable polydimethylsiloxane (PDMS) , 2017 .

[274]  Jianzhong Fu,et al.  3D printing of complex GelMA-based scaffolds with nanoclay , 2019, Biofabrication.

[275]  A. Evans.  Perspective on the Development of High‐Toughness Ceramics , 1990 .

[276]  Andrew J Boydston,et al.  Multimaterial actinic spatial control 3D and 4D printing , 2019, Nature Communications.

[277]  Thomas J. Hinton,et al.  3D Printing PDMS Elastomer in a Hydrophilic Support Bath via Freeform Reversible Embedding , 2016, ACS biomaterials science & engineering.

[278]  Gaofeng Zheng,et al.  Fabrication of nanochannels via near-field electrospinning , 2012 .

[279]  P. McHugh,et al.  Dependence of mechanical properties of polyamide components on build parameters in the SLS process , 2007 .

[280]  Xuanhe Zhao,et al.  Design of stiff, tough and stretchy hydrogel composites via nanoscale hybrid crosslinking and macroscale fiber reinforcement. , 2014, Soft matter.

[281]  Selçuk Güçeri,et al.  Mechanical characterization of parts fabricated using fused deposition modeling , 2003 .

[282]  J. Lewis,et al.  Omnidirectional Printing of 3D Microvascular Networks , 2011, Advanced materials.

[283]  Walter Michaeli,et al.  Extrusion Dies for Plastics and Rubber , 2003 .

[284]  R. Mülhaupt,et al.  Acrylic Nanocomposite Resins for Use in Stereolithography and Structural Light Modulation Based Rapid Prototyping and Rapid Manufacturing Technologies , 2008 .

[285]  Bin Duan,et al.  Encapsulation and release of biomolecules from Ca-P/PHBV nanocomposite microspheres and three-dimensional scaffolds fabricated by selective laser sintering , 2010 .

[286]  Feng Zhou,et al.  Multimaterials 3D Printing for Free Assembly Manufacturing of Magnetic Driving Soft Actuator , 2017 .

[287]  Yayue Pan,et al.  Multi-material Additive Manufacturing of Functional Soft Robot , 2019, Procedia Manufacturing.

[288]  Piyush R. Thakre,et al.  Three‐Dimensional Microvascular Fiber‐Reinforced Composites , 2011, Advanced materials.

[289]  Dishit P. Parekh,et al.  3D Printing by Multiphase Silicone/Water Capillary Inks , 2017, Advanced materials.

[290]  M. Buehler,et al.  Modeling and additive manufacturing of bio-inspired composites with tunable fracture mechanical properties. , 2014, Soft matter.

[291]  Jeffrey W Stansbury,et al.  3D printing with polymers: Challenges among expanding options and opportunities. , 2016, Dental materials : official publication of the Academy of Dental Materials.

[292]  Rigoberto C. Advincula,et al.  3D Printed Multifunctional, Hyperelastic Silicone Rubber Foam , 2019, Advanced Functional Materials.

[293]  Ali Khademhosseini,et al.  Functionalization, preparation and use of cell-laden gelatin methacryloyl–based hydrogels as modular tissue culture platforms , 2016, Nature Protocols.

[294]  Elisabetta A. Matsumoto,et al.  Biomimetic 4D printing. , 2016, Nature materials.

[295]  Tingting Zhao,et al.  Superstretchable and Processable Silicone Elastomers by Digital Light Processing 3D Printing. , 2019, ACS applied materials & interfaces.

[296]  C. Bettinger,et al.  Photoreconfigurable polymers for biomedical applications: chemistry and macromolecular engineering. , 2014, Biomacromolecules.

[297]  Brian Derby,et al.  Inkjet printing ceramics: from drops to solid , 2011 .

[298]  Howon Lee,et al.  Soft Robotic Manipulation and Locomotion with a 3D Printed Electroactive Hydrogel. , 2018, ACS applied materials & interfaces.

[299]  Qifa Zhou,et al.  3D‐Printed Biomimetic Super‐Hydrophobic Structure for Microdroplet Manipulation and Oil/Water Separation , 2018, Advanced materials.

[300]  Malcolm Xing,et al.  Skin‐Inspired Multifunctional Autonomic‐Intrinsic Conductive Self‐Healing Hydrogels with Pressure Sensitivity, Stretchability, and 3D Printability , 2017, Advanced materials.

[301]  S. KruegerPaul,et al.  Additive Manufacturing with Ultraviolet Curable Silicones Containing Carbon Black , 2018 .

[302]  Xuanhe Zhao,et al.  Designing toughness and strength for soft materials , 2017, Proceedings of the National Academy of Sciences.

[303]  Jun Fu,et al.  Tough nanocomposite double network hydrogels reinforced with clay nanorods through covalent bonding and reversible chain adsorption. , 2014, Journal of materials chemistry. B.

[304]  Howon Lee,et al.  Programming magnetic anisotropy in polymeric microactuators. , 2011, Nature materials.

[305]  Yu Jun Tan,et al.  Three-Dimensional Bioprinting of Oppositely Charged Hydrogels with Super Strong Interface Bonding. , 2018, ACS applied materials & interfaces.

[306]  Xiaofeng Cui,et al.  Improved properties of bone and cartilage tissue from 3D inkjet-bioprinted human mesenchymal stem cells by simultaneous deposition and photocrosslinking in PEG-GelMA , 2015, Biotechnology Letters.

[307]  Jos Malda,et al.  Reinforcement of hydrogels using three-dimensionally printed microfibres , 2015, Nature Communications.

[308]  T. Hirth,et al.  Chemical tailoring of gelatin to adjust its chemical and physical properties for functional bioprinting. , 2013, Journal of materials chemistry. B.

[309]  Manfred Hofmann,et al.  3D Printing Gets a Boost and Opportunities with Polymer Materials. , 2014, ACS macro letters.

[310]  M. Layani,et al.  3D Printing of Shape Memory Polymers for Flexible Electronic Devices , 2016, Advanced materials.