Agro-residue reinforced high-density polyethylene composites: Fiber characterization and analysis of composite properties

Abstract The main objective of this research was to study the potential of agro-residues such as wheat straw, cornstalk and corncob as reinforcements for thermoplastics as an alternative to wood fibers. High-density polyethylene (HDPE) composites were prepared with a high content of agro-residues (65 wt.%). Surface chemistry of agro-residues was studied in comparison with wood flour with a view to evaluate its importance in determining the end-use properties of the composites. Surface chemistry showed a more carbon rich surface for wheat straw compared to cornstalk, corncob and wood flour. Thermal degradation characteristics of the fibers were studied to investigate the feasibility of these fibers to the processing point of view. The results showed that the agro-residues starts decomposition as low as 200 °C indicating that they can be processed with thermoplastics having a melt temperature less than 200 °C. Mechanical properties and water absorption properties of the composites were studied to evaluate the viability of these fibers as reinforcements in HDPE. Wheat straw filled HDPE composites exhibited superior mechanical properties compared to cornstalk, corncob and even wood flour filled HDPE, where as cornstalk showed comparable mechanical properties to that of wood flour–HDPE composite. All the composites exhibited a high uptake of water due to the high amount of filler present and incorporation of compatibilizer decreased the water uptake of the composites. It was observed that irrespective of the presence of compatibilizers, flexural properties of the composites were decreased considerably after water absorption.

[1]  J. Balatinecz,et al.  X-ray photoelectron spectroscopy of maleated polypropylene treated wood fibers in a high-intensity thermokinetic mixer , 1999, Wood Science and Technology.

[2]  S. Stanzl-Tschegg,et al.  Surface analysis of different wood species using X-ray photoelectron spectroscopy (XPS) , 2001 .

[3]  P. Hornsby,et al.  Preparation and properties of polypropylene composites reinforced with wheat and flax straw fibres: Part II Analysis of composite microstructure and mechanical properties , 1997 .

[4]  J. Balatinecz,et al.  X-ray photoelectron spectroscopy study of silane-treated newsprint-fibers , 1999, Wood Science and Technology.

[5]  S. Chavan,et al.  Effect of maleic anhydride treatment on steam and water absorption of wood polymer composites prepared from wheat straw, cane bagasse, and teak wood sawdust using Novolac as matrix , 2000 .

[6]  E. Martuscelli,et al.  Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and wheat straw fibre composites: thermal, mechanical properties and biodegradation behaviour , 2000 .

[7]  S. Kaliaguine,et al.  ESCA study of the solid residues of supercritical extraction of Populus tremuloïdes in methanol , 1987 .

[8]  M Sain,et al.  Preparation and characterization of wheat straw fibers for reinforcing application in injection molded thermoplastic composites. , 2006, Bioresource technology.

[9]  G. Han,et al.  Upgrading of urea formaldehyde-bonded reed and wheat straw particleboards using silane coupling agents , 1998, Journal of Wood Science.

[10]  H. Paulapuro,et al.  Surface chemical composition of some non-wood pulps , 2002 .

[11]  M. Ansell,et al.  Straw-reinforced polyester composites , 1983 .

[12]  R. Rowell,et al.  Paper and Composites from Agro-Based Resources , 1996 .

[13]  X. Sun,et al.  Strawboard from vapor phase acetylation of wheat straw , 2000 .

[14]  P. Hornsby,et al.  Preparation and properties of polypropylene composites reinforced with wheat and flax straw fibres: Part I Fibre characterization , 1997 .

[15]  A. Grigoriou.  Straw-wood composites bonded with various adhesive systems , 2000, Wood Science and Technology.

[16]  N. Shiraishi,et al.  Composites of wood and polypropylenes IV. , 1990 .

[17]  D. Gray,et al.  surface analysis of paper and wood fibres by ESCA (electron spectroscopy for chemical analysis). i. application to cellulose and lignin , 1978 .

[18]  Mohini Sain,et al.  Interface Modification and Mechanical Properties of Natural Fiber-Polyolefin Composite Products , 2005 .

[19]  D. Hon.  ESCA study of oxidized wood surfaces , 1984 .

[20]  J. Balatinecz,et al.  Effects of Wood Fiber Surface Chemistry on the Mechanical Properties of Wood Fiber-Polypropylene Composites , 1997 .

[21]  X. Sun,et al.  Low density particleboard from wheat straw and corn pith , 2002 .