Film-Cooling Performance of a Turbine Vane Suction Side: The Showerhead Effect on Film-Cooling Hole Placement for Cylindrical and Fan-Shaped Holes
暂无分享,去创建一个
Hossein Nadali Najafabadi | Esa Utriainen | Matts Karlsson | Mats Kinell | M. Karlsson | E. Utriainen | Mats Kinell
[1] Jane E. Sargison,et al. A Converging Slot-Hole Film-Cooling Geometry—Part 2: Transonic Nozzle Guide Vane Heat Transfer and Loss , 2002 .
[2] Ronald Scott Bunker,et al. A review of shaped hole turbine film-cooling technology , 2005 .
[3] Richard J Goldstein,et al. Film Cooling With Injection Through Holes: Adiabatic Wall Temperatures Downstream of a Circular Hole , 1968 .
[4] W. Colban,et al. Heat Transfer and Film-Cooling Measurements on a Stator Vane With Fan-Shaped Cooling Holes , 2005 .
[5] Richard J. Anthony,et al. Showerhead Film Cooling Performance of a Turbine Vane at High Freestream Turbulence in a Transonic Cascade , 2012 .
[6] Gary D. Lock,et al. The application of thin-film technology to measure turbine-vane heat transfer and effectiveness in a film-cooled, engine-simulated environment , 1998 .
[7] David G. Bogard,et al. Adiabatic and Overall Effectiveness for the Showerhead Film Cooling of a Turbine Vane , 2012 .
[8] J. Sellers. Gaseous Film Cooling with Multiple Injection Stations , 1963 .
[9] Han Je-Chin,et al. Reynolds number effect on leading edge film effectiveness and heat transfer coefficient , 1993 .
[10] A. Bölcs,et al. The Transient Liquid Crystal Technique Employed for Sub- and Transonic Heat Transfer and Film Cooling Measurements in a Linear Cascade , 1998 .
[11] Ricardo Martinez-Botas,et al. Film cooling characteristics of a single round hole at various streamwise angles in a crossflow: Part I effectiveness , 2003 .
[12] R. J. Goldstein,et al. ADIABATIC WALL TEMPERATURE AND HEAT TRANSFER DOWNSTREAM OF INJECTION THROUGH TWO ROWS OF HOLES. , 1977 .
[13] A. Bölcs,et al. Investigation of Detailed Film Cooling Effectiveness and Heat Transfer Distributions on a Gas Turbine Airfoil , 1999 .
[14] H. Schlichting. Boundary Layer Theory , 1955 .
[15] R. Moffat. Using Uncertainty Analysis in the Planning of an Experiment , 1985 .
[16] Srinath V. Ekkad,et al. Effect of Trench Width and Depth on Film Cooling From Cylindrical Holes Embedded in Trenches , 2009 .
[17] Joon-Sik Lee,et al. Flow visualization and film cooling effectiveness measurements around shaped holes with compound angle orientations , 2002 .