Design and validation of a universal 6D seam-tracking system in robotic welding using arc sensing

This paper presents the design and validation of a novel and universal 6D seam-tracking system that reduces the need for accurate robot trajectory programming and geometrical databases in robotic arc welding. Such sensor-driven motion control together with adaptive control of the welding process is the foundation for increased flexibility and autonomous behavior of robotic and manufacturing systems. The system is able to follow any 3D spline seam in space with a moderate radius of curvature by real-time correction of the position and orientation of the welding torch, using the through-arc sensing method. The 6D seam-tracking system was developed in the Flexible Unified Simulation Environment (FUSE), integrating software prototyping with mechanical virtual prototyping, based on physical experiments. The validation experiments showed that this system was both robust and reliable, and is able to manage a radius of curvature less than 200 mm.

[1]  W. Doggett,et al.  An architecture for real-time interpretation and visualization of structural sensor data in a laboratory environment , 2000, 19th DASC. 19th Digital Avionics Systems Conference. Proceedings (Cat. No.00CH37126).

[2]  B. Allotta,et al.  Model-based constrained motion. b. Introducing on-line identification and observation of the motion constraints , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[3]  Mike Wilson.  Vision systems in the automotive industry , 1999 .

[4]  Peter I. Corke,et al.  A robotics toolbox for MATLAB , 1996, IEEE Robotics Autom. Mag..

[5]  B. Allotta,et al.  Model-based constrained motion. a. Modeling, specification and control , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[6]  Joan Batlle,et al.  A distributed environment for virtual and/or real experiments for underwater robots , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[7]  M.A.A. Arroyo Leon,et al.  An artificial neural network on a field programmable gate array as a virtual sensor , 1999 .

[8]  Mikael Fridenfalk,et al.  The Unified Simulation Environment-Envision Telerobotics and Matlab Merged into One Application , .

[9]  Asok Ray,et al.  An integrated system for intelligent seam tracking in robotic welding. II. Design and implementation , 1990, Proceedings., IEEE International Conference on Robotics and Automation.

[10]  H. B. Smartt,et al.  Design of a Robotic Welding System , 2006 .

[11]  G. Hailu,et al.  Improving tracking behavior with virtual sensors in the loop , 2001, 2001 IEEE Aerospace Conference Proceedings (Cat. No.01TH8542).

[12]  Gunnar Bolmsjö,et al.  Design and validation of a sensor guided control system for robot welding in shipbuilding , 2002 .

[13]  Gunnar Bolmsjö,et al.  Design and validation of a sensor guided robot control system for welding in shipbuilding , 2002 .

[14]  M. Oosterom,et al.  Virtual sensor for fault detection and isolation in flight control systems - fuzzy modeling approach , 2000, Proceedings of the 39th IEEE Conference on Decision and Control (Cat. No.00CH37187).

[15]  Simon Haykin,et al.  Neural networks for sensor fusion in remote sensing , 1999, IJCNN'99. International Joint Conference on Neural Networks. Proceedings (Cat. No.99CH36339).

[16]  Asok Ray,et al.  An integrated system for intelligent seam tracking in robotic welding. Conceptual and analytical development , 1990, Proceedings., IEEE International Conference on Robotics and Automation.