Tailoring Electrolyte Solvation to Push the Capacity Limit of Layered Oxide Cathodes via Polarized Ferroelectric Polymers

[1]  Weifeng Wei,et al.  Regulating Oxygen Covalent Electron Localization to Enhance Anionic Redox Reversibility of Lithium-rich Layered Oxide Cathodes , 2022, Energy Storage Materials.

[2]  Y. Liu,et al.  Improved High-Potential Property of Ni-Rich LiNi0.8Co0.1Mn0.1O2 with a Garnet Ceramic LLZTO Surface Modification in Li-Ion Batteries , 2021, ACS Applied Energy Materials.

[3]  D. Shu,et al.  Dual-Functional Tungsten Boosted Lithium-Ion Diffusion and Structural Integrity of LiNi0.8Co0.1Mn0.1O2 Cathodes for High Performance Lithium-Ion Batteries , 2021, ACS Sustainable Chemistry & Engineering.

[4]  Xiaobo Ji,et al.  Anchoring Interfacial Nickel Cations by Tunable Coordinative Structure for Highly Stabilized Nickel-Rich Layered Oxide Cathodes , 2021, Nano Energy.

[5]  Xueping Gao,et al.  Elucidating the Effect of the Dopant Ionic Radius on the Structure and Electrochemical Performance of Ni-Rich Layered Oxides for Lithium-Ion Batteries. , 2021, ACS applied materials & interfaces.

[6]  P. Notten,et al.  A Review of Degradation Mechanisms and Recent Achievements for Ni‐Rich Cathode‐Based Li‐Ion Batteries , 2021, Advanced Energy Materials.

[7]  Yunhui Huang,et al.  Tailoring electrolyte to enable high-rate and super-stable Ni-rich NCM cathode materials for Li-ion batteries , 2021 .

[8]  Qingyu Li,et al.  Stabilizing reaction interface in Ni-rich layered oxides cathode for high-performance lithium-ion batteries at a high cutoff voltage , 2021, Chemical Engineering Journal.

[9]  Hong Dong,et al.  Adjusting the solvation structure with tris(trimethylsilyl)borate additive to improve the performance of LNCM half cells , 2021, Journal of Energy Chemistry.

[10]  Qiaobao Zhang,et al.  LiPO2F2 electrolyte additive for high-performance Li-rich cathode material , 2021 .

[11]  Hongcai Gao,et al.  Achieving a bifunctional conformal coating on nickel-rich cathode LiNi0.8Co0.1Mn0.1O2 with half-cyclized polyacrylonitrile , 2021 .

[12]  M. Deschamps,et al.  Extending insertion electrochemistry to soluble layered halides with superconcentrated electrolytes , 2021, Nature Materials.

[13]  Weifeng Wei,et al.  Heteroepitaxial interface of layered cathode materials for lithium ion batteries , 2021 .

[14]  K. Amine,et al.  Development of cathode-electrolyte-interphase for safer lithium batteries , 2021 .

[15]  Yong Yang,et al.  Stabilizing Ni-Rich LiNi0.83Co0.12Mn0.05O2 with Cyclopentyl Isocyanate as a Novel Electrolyte Additive. , 2021, ACS applied materials & interfaces.

[16]  Seong‐Hyeon Hong,et al.  New Insight into Microstructure Engineering of Ni‐Rich Layered Oxide Cathode for High Performance Lithium Ion Batteries , 2021, Advanced Functional Materials.

[17]  Jing Li,et al.  An effective doping strategy to improve the cyclic stability and rate capability of Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode , 2020 .

[18]  Yan‐Bing He,et al.  In-situ construction of hierarchical cathode electrolyte interphase for high performance LiNi0.8Co0.1Mn0.1O2/Li metal battery , 2020 .

[19]  Hyunchul Kim,et al.  Stabilizing effects of Al-doping on Ni-rich LiNi0.80Co0.15Mn0.05O2 cathode for Li rechargeable batteries , 2020 .

[20]  Qingyu Li,et al.  Stable surface construction of the Ni-rich LiNi0.8Mn0.1Co0.1O2 cathode material for high performance lithium-ion batteries , 2020, Journal of Materials Chemistry A.

[21]  M. Wohlfahrt‐Mehrens,et al.  Influence of the Electrolyte Salt Concentration on the Rate Capability of Ultra‐Thick NCM 622 Electrodes , 2020, Batteries & Supercaps.

[22]  She-huang Wu,et al.  Enhanced performance of a Ni-rich LiNi0.8Co0.1Mn0.1O2 cathode material formed through Taylor flow synthesis and surface modification with Li2MoO4 , 2020 .

[23]  Kyeongjae Cho,et al.  Surface-Dependent Stress-Corrosion Cracking in Ni-Rich Layered Oxide Cathodes , 2020, Acta Materialia.

[24]  Weishan Li,et al.  Constructing a Low Impedance Interface on High-voltage LiNi0.8Co0.1Mn0.1O2 Cathode by 2,4,6-Triphenyl Boroxine as Film-forming Electrolyte Additive for Li-ion Batteries. , 2020, ACS applied materials & interfaces.

[25]  J. Bernholc,et al.  Chirality-induced relaxor properties in ferroelectric polymers , 2020, Nature Materials.

[26]  H. Ma,et al.  Electrolyte-Additive-Driven Interfacial Engineering for High-Capacity Electrodes in Lithium-Ion Batteries: Promise and Challenges , 2020 .

[27]  Jason A. Weeks,et al.  Beyond Doping and Coating: Prospective Strategies for Stable High-Capacity Layered Ni-Rich Cathodes , 2020 .

[28]  Yong Yang,et al.  Construction of a Stable LiNi0.8Co0.1Mn0.1O2 (NCM811) Cathode Interface by a Multifunctional Organosilicon Electrolyte Additive , 2020 .

[29]  Ling Huang,et al.  A special enabler for boosting cyclic life and rate capability of LiNi0.8Co0.1Mn0.1O2: Green and simple additive , 2019, Nano Energy.

[30]  Zonghai Chen,et al.  Building ultraconformal protective layers on both secondary and primary particles of layered lithium transition metal oxide cathodes , 2019, Nature Energy.

[31]  C. Yoon,et al.  Degradation Mechanism of Ni-Enriched NCA Cathode for Lithium Batteries: Are Microcracks Really Critical? , 2019, ACS Energy Letters.

[32]  Venkat R. Subramanian,et al.  Pathways for practical high-energy long-cycling lithium metal batteries , 2019, Nature Energy.

[33]  Min‐Sik Park,et al.  Facile Mn Surface Doping of Ni-Rich Layered Cathode Materials for Lithium Ion Batteries. , 2018, ACS applied materials & interfaces.

[34]  Wangda Li,et al.  Extending the Service Life of High‐Ni Layered Oxides by Tuning the Electrode–Electrolyte Interphase , 2018, Advanced Energy Materials.

[35]  Ji‐Guang Zhang,et al.  Tailoring grain boundary structures and chemistry of Ni-rich layered cathodes for enhanced cycle stability of lithium-ion batteries , 2018, Nature Energy.

[36]  Jun Lu,et al.  30 Years of Lithium‐Ion Batteries , 2018, Advanced materials.

[37]  P. Albertus,et al.  Status and challenges in enabling the lithium metal electrode for high-energy and low-cost rechargeable batteries , 2017, Nature Energy.

[38]  Muklesur Rahman,et al.  Pure β-phase formation in polyvinylidene fluoride (PVDF)-carbon nanotube composites , 2017 .

[39]  Jaephil Cho,et al.  Significance of ferroelectric polarization in poly (vinylidene difluoride) binder for high-rate Li-ion diffusion , 2017 .

[40]  G. Cui,et al.  Surface and Interface Issues in Spinel LiNi0.5Mn1.5O4: Insights into a Potential Cathode Material for High Energy Density Lithium Ion Batteries , 2016 .

[41]  M. Cantoni,et al.  Negative-pressure-induced enhancement in a freestanding ferroelectric. , 2015, Nature materials.

[42]  Seung Min Kim,et al.  Investigating the Reversibility of Structural Modifications of LixNiyMnzCo1–y–zO2 Cathode Materials during Initial Charge/Discharge, at Multiple Length Scales , 2015 .

[43]  S. Evoy,et al.  A review of piezoelectric polymers as functional materials for electromechanical transducers , 2014 .

[44]  D. Roy Mahapatra,et al.  Characterization of a large-area PVDF thin film for electro-mechanical and ultrasonic sensing applications , 2010 .

[45]  S. Lanceros‐Méndez,et al.  Influence of the β-phase content and degree of crystallinity on the piezo- and ferroelectric properties of poly(vinylidene fluoride) , 2010 .

[46]  Jun-ichi Yamaki,et al.  Decomposition reaction of LiPF6-based electrolytes for lithium ion cells , 2006 .

[47]  M. Trieloff,et al.  Structure and thermal history of the H-chondrite parent asteroid revealed by thermochronometry , 2003, Nature.

[48]  R. Gregorio,et al.  Effect of crystalline phase, orientation and temperature on the dielectric properties of poly (vinylidene fluoride) (PVDF) , 1999 .

[49]  Yang Wang,et al.  Improvement of electrochemical reversibility of the Ni-Rich cathode material by gallium doping , 2020 .

[50]  N. Wu,et al.  High Polarity Poly(vinylidene difluoride) Thin Coating for Dendrite‐Free and High‐Performance Lithium Metal Anodes , 2018 .

[51]  Q. Qu,et al.  Improved Li-ion diffusion and stability of a LiNi0.5Mn1.5O4 cathode through in situ co-doping with dual-metal cations and incorporation of a superionic conductor , 2017 .