Flow and heat transfer performances of helical baffle heat exchangers with different baffle configurations

Abstract The flow and heat transfer performances of four helical baffle heat exchangers were numerically simulated. The exchangers exhibited an approximate spiral pitch and different configurations, i.e., a trisection circumferential overlap baffle scheme with a baffle incline angle of 20° (20°TCO), a quadrant circumferential overlap baffle scheme with a baffle incline angle of 18° (18°QCO), a quadrant end-to-end baffle scheme with a baffle incline angle of 18° (18°QEE), and a continuous helical baffle scheme with a baffle helical angle of 18.4° (18.4°CH). Velocity vectors superimposed pressure nephogram for meridian slice M1, transverse slices f and f1, and superimposed velocity nephogram for unfolded concentric combination slices CS2 and CS3 are presented. The heat transfer enhancement mechanisms of secondary flow were analyzed. Curves describing the local average heat fluxes of heat transfer tubes T1–T9 within a 60° sector region and those of concentric heat transfer tube layers N1–N4 are presented. The results show that the 20°TCO scheme possesses the best market application value for its highest shell-side heat transfer factor j o and average comprehensive index ( j o / f o ). The 18.4°CH scheme performs difficulty in manufacturing with continuous helical baffle but exhibits the worse performances in terms of j o and ( j o / f o ).

[1]  Song-Charng Kong,et al.  BIOTC: An open-source CFD code for simulating biomass fast pyrolysis , 2014, Comput. Phys. Commun..

[2]  Pan Chu,et al.  Design and optimization of heat exchangers with helical baffles , 2008 .

[3]  Jing Xu,et al.  Second-Law Thermodynamic Comparison and Maximal Velocity Ratio Design of Shell-and-Tube Heat Exchangers With Continuous Helical Baffles , 2010 .

[4]  Huang Yanping,et al.  Experimental Study of Heat Transfer and Flow Resistance Characteristics for Shell-and-Tube Heat Exchangers with Continuous Helical Baffles , 2006 .

[5]  Min Zeng,et al.  Numerical Studies and Experimental Validation on Combined Parallel Multiple Shell-pass Shell-and-tube Heat Exchangers with Continuous Helical Baffles , 2010 .

[6]  Petr Stehlík,et al.  Helical Baffles in Shell-and-Tube Heat Exchangers, Part I: Experimental Verification , 1996 .

[7]  J. Lutcha,et al.  Performance improvement of tubular heat exchangers by helical baffles , 1990 .

[8]  Yaping Chen,et al.  Numerical simulation on flow field in circumferential overlap trisection helical baffle heat exchanger , 2013 .

[9]  M. R. Jafari Nasr,et al.  Fluid flow analysis and extension of rapid design algorithm for helical baffle heat exchangers , 2008 .

[10]  Bin Li,et al.  Experimental performance comparison of shell-side heat transfer for shell-and-tube heat exchangers with middle-overlapped helical baffles and segmental baffles , 2009 .

[11]  Yaping Chen,et al.  Numerical simulation of heat transfer and flow of cooling air in triangular wavy fin channels , 2014 .

[12]  Min Zeng,et al.  Numerical investigation on combined multiple shell-pass shell-and-tube heat exchanger with continuous helical baffles , 2009 .

[13]  Wen-Quan Tao,et al.  3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles – Part I: Numerical model and results of whole heat exchanger with middle-overlapped helical baffles , 2009 .

[14]  Jin-Ping Wang,et al.  Experimental performance comparison of shell-and-tube oil coolers with overlapped helical baffles and segmental baffles , 2013 .

[15]  Farhad Nemati Taher,et al.  Tube bundle replacement for segmental and helical shell and tube heat exchangers: Performance comparison and fouling investigation on the shell side , 2013 .

[16]  Chen Wang,et al.  Experimental Studies on Thermal Performance and Flow Resistance of Heat Exchangers with Helical Baffles , 2009 .

[17]  Song-Charng Kong,et al.  Development of a generalized numerical framework for simulating biomass fast pyrolysis in fluidize , 2013 .

[18]  Farhad Nemati Taher,et al.  Baffle space impact on the performance of helical baffle shell and tube heat exchangers , 2012 .

[19]  Gongnan Xie,et al.  An experimental study of shell-and-tube heat exchangers with continuous helical baffles , 2007 .

[20]  Malcolm J. Andrews,et al.  Three-Dimensional Modeling of a Helixchanger® Heat Exchanger Using CFD , 2005 .

[21]  Luhong Zhang,et al.  Numerical investigation of helical baffles heat exchanger with different Prandtl number fluids , 2013 .

[22]  Wen-Quan Tao,et al.  3D numerical simulation on shell-and-tube heat exchangers with middle-overlapped helical baffles and continuous baffles – Part II: Simulation results of periodic model and comparison between continuous and noncontinuous helical baffles , 2009 .

[23]  Petr Stehlík,et al.  Different Strategies to Improve Industrial Heat Exchange , 2002 .

[24]  E. Paterson,et al.  OpenFOAM for computational fluid dynamics , 2014 .