Seismic retrofitting of RC joints using steel cage and haunch with bolted steel plate

[1]  H. Tajmir Riahi,et al.  Seismic performance of reinforced concrete beam-column joints strengthened with NSM steel bars and NSM CFRP strips , 2022, Structures.

[2]  M. Saghafi,et al.  Experimental investigation of grooving method in seismic retrofit of beam-column external joints without seismic details using CFRP sheets , 2021, Structures.

[3]  Kequan Yu,et al.  Seismic retrofit of large-scale interior RC beam-column-slab joints after standard fire using steel haunch system , 2021, Engineering Structures.

[4]  Xin Liu,et al.  Seismic performance of RC beam-column-slab joints strengthened with steel haunch system , 2021, Journal of Building Engineering.

[5]  E. N. Farsangi,et al.  Strengthening of RC beam-column joints using steel plate with shear connectors: Experimental investigation , 2021, Structures.

[6]  Xin Liu,et al.  Seismic performance of post-fire reinforced concrete beam-column joints strengthened with steel haunch system , 2021 .

[7]  A. Abouelezz,et al.  Different techniques of steel jacketing for retrofitting of different types of concrete beams after elevated temperature exposure , 2020 .

[8]  H. Akbarzadeh Bengar,et al.  Performance of an innovative anchorage system for strengthening RC beams in adjacency of columns with FRP laminates , 2020 .

[9]  M. Saghafi,et al.  The effect of high-performance fiber-reinforced cementitious composites on the lateral behavior of reinforced concrete frames without seismic details , 2020 .

[10]  Bashir Alam,et al.  Haunch retrofitting technique for seismic upgrading deficient RC frames , 2019, Bulletin of Earthquake Engineering.

[11]  Emad Gad,et al.  Seismic retrofit of exterior RC beam-column joint using diagonal haunch , 2018, Engineering Structures.

[12]  Srinivas Voggu,et al.  Strut-Relieved Single Steel Haunch Bracing System for Mitigating Seismic Damage of Gravity Load Designed Structures , 2018, Journal of Structural Engineering.

[13]  Bin Wang,et al.  Seismic Retrofitting of Non-Seismically Designed RC Beam-Column Joints using Buckling-Restrained Haunches: Design and Analysis , 2018 .

[14]  Tarek H. Almusallam,et al.  Strengthening of precast RC beam-column connections for progressive collapse mitigation using bolted steel plates , 2018 .

[15]  Saptarshi Sasmal,et al.  Novel non-invasive seismic upgradation strategies for gravity load designed exterior beam-column joints , 2018 .

[16]  Asad Esmaeily,et al.  Seismic retrofit of external concrete beam-column joints reinforced by plain bars using steel angles prestressed by cross ties , 2017 .

[17]  Lei Wang,et al.  Shear performance of bolted side-plated reinforced concrete beams , 2017 .

[18]  Ngoc-Hieu Dinh,et al.  Experimental Study on Structural Performance of RC Exterior Beam-Column Joints Retrofitted by Steel Jacketing and Haunch Element under Cyclic Loading Simulating Earthquake Excitation , 2017 .

[19]  Sassan Eshghi,et al.  A combination of GFRP sheets and steel cage for seismic strengthening of shear-deficient corner RC beam-column joints , 2017 .

[20]  Saptarshi Sasmal,et al.  Evaluation of performance of non‐invasive upgrade strategy for beam–column sub‐assemblages of poorly designed structures under seismic type loading , 2016 .

[21]  Alireza Goudarzi,et al.  Seismic Rehabilitation of Exterior RC Beam-Column Joints Using Steel Plates, Angles, and Posttensioning Rods , 2016 .

[22]  Ö. Yurdakul,et al.  Strengthening of substandard reinforced concrete beam-column joints by external post-tension rods , 2016 .

[23]  Abdollah Hosseini,et al.  Seismic retrofit of external RC beam–column joints by joint enlargement using prestressed steel angles , 2014 .

[24]  J. Ingham,et al.  Rehabilitation of earthquake damaged external RC beam‐column joints by joint enlargement using prestressed steel angles , 2014 .

[25]  Joaquín G. Ruiz-Pinilla,et al.  Experimental tests on retrofitted RC beam-column joints underdesigned to seismic loads. General approach , 2014 .

[26]  Ray Kai Leung Su,et al.  Optimization of partial interaction in bolted side-plated reinforced concrete beams , 2014 .

[27]  Jack P. Moehle,et al.  Shaking table tests on reinforced concrete frames without seismic detailing , 2013 .

[28]  Sabahattin Aykaç,et al.  Strengthening and Repair of Reinforced Concrete Beams Using External Steel Plates , 2013 .

[29]  Ray Kai Leung Su,et al.  Experimental Study of Moderately Reinforced Concrete Beams Strengthened with Bolted-Side Steel Plates , 2013 .

[30]  Ali Kheyroddin,et al.  Cyclic performance of retrofitted reinforced concrete beam–column joints using steel prop , 2012 .

[31]  Scott T Smith,et al.  Effects of bolt–plate arrangements on steel plate strengthened reinforced concrete beams , 2010 .

[32]  J.Y.R. Yen,et al.  Steel plates rehabilitated RC beam–column joints subjected to vertical cyclic loads , 2010 .

[33]  Aly Marei Said,et al.  Rehabilitation of RC frame joints using local steel bracing , 2008 .

[34]  Stefano Pampanin,et al.  Development and validation of a metallic haunch seismic retrofit solution for existing under‐designed RC frame buildings , 2006 .

[35]  D. Oehlers,et al.  Moment Redistribution in FRP and Steel-Plated Reinforced Concrete Beams , 2006 .

[36]  N. K. Subedi,et al.  External steel plate systems for the shear strengthening of reinforced concrete beams , 2001 .

[37]  Hiroshi Mutsuyoshi,et al.  Shear strengthening of reinforced concrete beams using steel plates bonded on beam web: experiments and analysis , 2000 .

[38]  Chia-Ming Uang,et al.  SEISMIC REHABILITATION DESIGN OF STEEL MOMENT CONNECTION WITH WELDED HAUNCH , 2000 .