What should be recycled: An integrated model for product recycling desirability

This research was focused on developing a new scientific approach for prioritising recycling of end-of-life products in a circular economy. To date, product complexity based on the mixture of materials has been used as a predictor of what gets recycled. While the separation of materials that make up a product has been modelled as a measure of product complexity, this does not taken into account the benefits and considerations in recycling products. In this paper, a new agenda and approach to prioritise the recycling of products was developed based on a recycling desirability index. The material mixing complexity measure was inverted into a simplicity index and then extended by modelling the security index for the mix of materials and the technological readiness level of recycling technologies. The extended model is proposed as an integrated measure of the desirability of recycling end-of-life products. From this analysis, an apparent recycling desirability boundary, enabling products to be prioritised for recycling, was developed. This model and analysis can be used as an information source in developing policies and product recycling priorities.

[1]  Kurt Gerdes,et al.  Technology Readiness Assessment of Department of Energy Waste Processing Facilities , 2007 .

[2]  Robert Rosen,et al.  The NASA technology push towards future space mission systems , 1989 .

[3]  Gregory A. Keoleian,et al.  Optimal household refrigerator replacement policy for life cycle energy, greenhouse gas emissions, and cost , 2006 .

[4]  Michael Todosow,et al.  Technology readiness levels for advanced nuclear fuels and materials development , 2017 .

[5]  H. Wenzel,et al.  Reviewing resource criticality assessment from a dynamic and technology specific perspective: using the case of direct-drive wind turbines , 2016 .

[6]  Brian Sauser,et al.  System development planning using readiness levels in a cost of development minimization model , 2010 .

[7]  Bülent Sezen,et al.  Effects of Green Manufacturing and Eco-innovation on Sustainability Performance☆ , 2013 .

[8]  T.G. Gutowski,et al.  Mixing entropy and product recycling , 2005, Proceedings of the 2005 IEEE International Symposium on Electronics and the Environment, 2005..

[9]  Hamidreza Bakhtiary-Davijany,et al.  On Methods for Maturity Assessment of CO2 Capture Technologies , 2013 .

[10]  Olga Battaïa,et al.  A decision support system to manage the quality of End-of-Life products in disassembly systems , 2016 .

[11]  Dimitri N. Mavris,et al.  Characterization of Technology Integration Based on Technology Readiness Levels , 2014 .

[12]  Patrik Raheb,et al.  Development of a configurable system that evaluates the materials criticality at a corporate level , 2015 .

[13]  Sami Kara,et al.  Toward integrated product and process life cycle planning—An environmental perspective , 2012 .

[14]  Joe Alper,et al.  Technologies to Enable Autonomous Detection for BioWatch: Ensuring Timely and Accurate Information for Public Health Officials : Workshop Summary , 2014 .

[15]  Masaru Nakano,et al.  Towards a Circular Economy for End-of-Life Vehicles: A Comparative Study UK – Japan☆ , 2015 .

[16]  Yuya Kajikawa,et al.  Multi-level perspectives with technology readiness measures for aviation innovation , 2012, Sustainability Science.

[17]  Timothy G Gutowski,et al.  What gets recycled: an information theory based model for product recycling. , 2007, Environmental science & technology.

[18]  Ashutosh Tiwari,et al.  Technology readiness level assessment of composites recycling technologies , 2016 .

[19]  Jeremy Straub,et al.  In search of technology readiness level (TRL) 10 , 2015 .

[20]  P. Mativenga,et al.  Resource Efficiency and Composite Waste in UK Supply Chain , 2015 .