Fractographical characterization of hot pressed and pressureless sintered SiAlON-doped ZrB2-SiC composites

[1]  Mehdi Shahedi Asl,et al.  Characteristics of multi-walled carbon nanotube toughened ZrB2–SiC ceramic composite prepared by hot pressing , 2016 .

[2]  Mehdi Shahedi Asl,et al.  Temperature dependence of microstructure evolution during hot pressing of ZrB2–30 vol.% SiC composites , 2016 .

[3]  Mehdi Shahedi Asl,et al.  Significance of hot pressing parameters and reinforcement size on sinterability and mechanical properties of ZrB2–25 vol% SiC UHTCs , 2015 .

[4]  Mehdi Shahedi Asl,et al.  Reactive hot pressing of ZrB2-based composites with changes in ZrO2/SiC ratio and sintering conditions. Part I: Densification behavior , 2015 .

[5]  Mehdi Shahedi Asl,et al.  Microstructural development and mechanical properties of hot pressed SiC reinforced TiB2 based composite , 2015 .

[6]  Mehdi Shahedi Asl,et al.  A Taguchi approach to the influence of hot pressing parameters and SiC content on the sinterability of ZrB2-based composites , 2015 .

[7]  Mehdi Shahedi Asl,et al.  Significance of hot pressing parameters and reinforcement size on densification behavior of ZrB2–25 vol% SiC UHTCs , 2015 .

[8]  Mehdi Shahedi Asl,et al.  Taguchi analysis on the effect of hot pressing parameters on density and hardness of zirconium diboride , 2015 .

[9]  Mehdi Shahedi Asl,et al.  Influence of graphite nano-flakes on densification and mechanical properties of hot-pressed ZrB2–SiC composite , 2015 .

[10]  Mehdi Shahedi Asl,et al.  Significance of hot pressing parameters on the microstructure and densification behavior of zirconium diboride , 2015 .

[11]  Mehdi Shahedi Asl,et al.  Characterization of hot-pressed graphene reinforced ZrB 2 –SiC composite , 2015 .

[12]  Mehdi Shahedi Asl,et al.  Hardness and toughness of hot pressed ZrB2–SiC composites consolidated under relatively low pressure , 2015 .

[13]  Mehdi Shahedi Asl,et al.  A fractographical approach to the sintering process in porous ZrB2–B4C binary composites , 2015 .

[14]  Mehdi Shahedi Asl,et al.  Fractographical assessment of densification mechanisms in hot pressed ZrB2-SiC composites , 2014 .

[15]  D. Fang,et al.  Microstructure and mechanical properties of ZrB2–SiC composites prepared by gelcasting and pressureless sintering , 2014 .

[16]  M. Fang,et al.  Effect of Silicon Addition on High-Temperature Solid Particle Erosion-Wear Behaviour of Mullite-SiC Composite Refractories Prepared by Nitriding Reactive , 2014 .

[17]  Yu-shi Ding,et al.  Fabrication of β-Sialon/ZrN/ZrON composites using fly ash and zircon , 2013 .

[18]  K. Ray,et al.  Effect of SiC content, additives and process parameters on densification and structure–property relations of pressureless sintered ZrB2–SiC composites , 2013 .

[19]  N. Glandut,et al.  Surface densification of porous ZrB2–39 mol.% SiC ceramic composites by a laser process , 2012 .

[20]  Jun Liang,et al.  Influence of Oxidation Healing for Cracks on the Strength of Hot‐Pressed ZrB2–SiC–AlN Ceramics , 2012 .

[21]  Yu-shi Ding,et al.  Effects of synthesis temperature and raw materials composition on preparation of β-Sialon based composites from fly ash , 2012 .

[22]  V. Medri,et al.  Pressureless sintered in situ toughened ZrB2–SiC platelets ceramics , 2011 .

[23]  Baolin Wang,et al.  Effect of BN grain size on microstructure and mechanical properties of the ZrB2–SiC–BN composites , 2011 .

[24]  Jiecai Han,et al.  Research on thermal shock resistance of ZrB2-SiC-AlN ceramics using an indentation-quench method , 2010 .

[25]  W. Zhang,et al.  Fabrication and properties of ZrB2-SiC-BN machinable ceramics , 2010 .

[26]  Min Guo,et al.  Thermodynamic study and syntheses of β-SiAlON ceramics , 2009 .

[27]  Yiguang Wang,et al.  Pressureless sintering ZrB2–SiC ceramics at low temperatures , 2009 .

[28]  Xinghong Zhang,et al.  Effect of graphite flake on microstructure as well as mechanical properties and thermal shock resistance of ZrB2―SiC matrix ultrahigh temperature ceramics , 2009 .

[29]  L. Jing,et al.  The influence of surface heat transfer conditions on thermal shock behavior of ZrB2–SiC–AlN ceramic composites , 2009 .

[30]  Jiecai Han,et al.  High temperature deformation of ZrB2–SiC–AlN ceramic composite , 2009 .

[31]  Guo‐Jun Zhang,et al.  Pressureless sintering mechanism and microstructure of ZrB2–SiC ceramics doped with boron , 2009 .

[32]  邹冀.  Formation of tough interlocking microstructure in ZrB2-SiC-based ultrahigh-temperature ceramics by pressureless sintering , 2009 .

[33]  Jiecai Han,et al.  Ablation resistance of ZrB2–SiC–AlN ceramic composites , 2009 .

[34]  Jun Liang,et al.  Mechanical properties and thermal shock behavior of hot-pressed ZrB2–SiC–AlN composites , 2009 .

[35]  S. Guo,et al.  Densification of ZrB2-based composites and their mechanical and physical properties: A review , 2009 .

[36]  Y. Yan,et al.  Pressureless sintering of ZrB2–SiC ceramics: the effect of B4C content , 2009 .

[37]  Gang Li,et al.  Effect of AlN as sintering aid on hot-pressed ZrB2–SiC ceramic composite , 2009 .

[38]  X. Hou,et al.  A Comparison of Oxidation Kinetics of O′-SiAlON and β-SiAlON Powders Synthesized from Bauxite , 2008 .

[39]  J. Zou,et al.  Pressureless densification of ZrB2–SiC composites with vanadium carbide , 2008 .

[40]  G. Hilmas,et al.  Pressureless Sintering of Zirconium Diboride: Particle Size and Additive Effects , 2008 .

[41]  G. Hilmas,et al.  Pressureless sintering of carbon-coated zirconium diboride powders , 2007 .

[42]  William G. Fahrenholtz,et al.  Refractory Diborides of Zirconium and Hafnium , 2007 .

[43]  Yaogang Li,et al.  Hot pressed ZrB2–SiC–C ultra high temperature ceramics with polycarbosilane as a precursor , 2007 .

[44]  G. Hilmas,et al.  Effect of hot pressing time and temperature on the microstructure and mechanical properties of ZrB2–SiC , 2007 .

[45]  G. Hilmas,et al.  Fabrication and properties of reactively hot pressed ZrB2–SiC ceramics , 2007 .

[46]  G. Hilmas,et al.  Low-Temperature Densification of Zirconium Diboride Ceramics by Reactive Hot Pressing , 2006 .

[47]  G. Hilmas,et al.  Pressureless Sintering of Zirconium Diboride , 2006 .

[48]  W. Fahrenholtz.  The ZrB2 Volatility Diagram , 2005 .

[49]  A. Bellosi,et al.  Development and characterization of metal-diboride-based composites toughened with ultra-fine SiC particulates , 2005 .

[50]  A. Bellosi,et al.  Efficacy of HfN as sintering aid in the manufacture of ultrahigh-temperature metal diborides-matrix ceramics , 2004 .

[51]  A. Bellosi,et al.  Beneficial Effects of AlN as Sintering Aid on Microstructure and Mechanical Properties of Hot‐pressed ZrB2 , 2003 .

[52]  A. Bellosi,et al.  Advances in microstructure and mechanical properties of zirconium diboride based ceramics , 2003 .

[53]  S. A. Suvorov,et al.  Thermodynamic Properties of β-Sialon , 2002 .

[54]  Alida Bellosi,et al.  Effect of the addition of silicon nitride on sintering behaviour and microstructure of zirconium diboride , 2002 .

[55]  Dale L. Perry,et al.  Handbook of Inorganic Compounds. , 1995 .

[56]  J. Moon,et al.  Elimination of large Pores During Gas‐Pressure Sintering of β′‐Sialon , 1989 .

[57]  H. Yokokawa,et al.  Reduction of Alumina: Effect of Silicon Compounds on Oxycarbide Behavior , 1982 .

[58]  T. Noda.  Graphitization of carbon under high pressure , 1968 .