Dynamic mechanical analysis of randomly oriented intimately mixed short banana/sisal hybrid fibre reinforced polyester composites

Abstract The dynamic and static mechanical properties of randomly oriented intimately mixed short banana/sisal hybrid fibre reinforced polyester composites were determined. Dynamic properties such as the storage modulus (E′), damping behaviour (tan δ) and static mechanical properties such as tensile, flexural and impact properties were investigated as a function of total fibre volume fraction and the relative volume fraction of the two fibres. Keeping the relative volume fraction of banana and sisal (1:1), the volume fraction of the fibre was optimised. The storage modulus was found to increase with fibre volume fraction above glass transition temperature (Tg) of the matrix and maximum value was obtained at a volume fraction (Vf) of 0.40. The tan δ peak height was minimum and peak width was maximum at 0.40Vf. Tensile modulus and flexural strength were found to be the highest at 0.40 volume fraction, which indicates effective stress transfer between the fibre and matrix. A positive shift in Tg of polyester matrix at 0.40Vf also indicates better fibre/matrix interaction. Keeping the total fibre volume fraction, 0.40Vf, hybrid composites having different volume ratios of the fibres and unhybridised composites were prepared and analysed. Sisal/polyester composite showed maximum damping behaviour and highest impact strength as compared to banana/polyester as well as hybrid composites. However, maximum stress transfer between the fibre and matrix was obtained in composites having volume ratio of banana and sisal as 3:1,which has lowest tan δ value and highest E′ value at Tg. The tensile strength and flexural modulus were also the maximum and impact strength was the minimum at this volume ratio. Fractographic evaluations carried out under scanning electron microscope (SEM) confirm the quantitative characterisation obtained from static and dynamic mechanical analysis. The Arrhenius relationship has been used to calculate the activation energy of the glass transition of the polyester. The highest activation energy was found in hybrid composite with volume ratio of banana and sisal as 3:1. A master curve was constructed based on time–temperature superposition principle. Finally, the experimental results were compared with theoretical predictions.

[1]  Dimitrios N. Bikiaris,et al.  Mechanical Properties and Viscoelastic Behavior of Basalt Fiber-Reinforced Polypropylene , 1999 .

[2]  Z. Ishak,et al.  Modification of oil palm empty fruit bunches with maleic anhydride: The effect on the tensile and dimensional stability properties of empty fruit bunch/polypropylene composites , 2003 .

[3]  Zachariah Oommen,et al.  Dynamic mechanical analysis of banana fiber reinforced polyester composites , 2003 .

[4]  Sabu Thomas,et al.  Influence of interfacial adhesion on the mechanical properties and fracture behaviour of short sisal fibre reinforced polymer composites , 1996 .

[5]  Sabu Thomas,et al.  Short Banana Fiber Reinforced Polyester Composites: Mechanical, Failure and Aging Characteristics , 1997 .

[6]  Sergio Neves Monteiro,et al.  Analysis of the tensile strength of polyester/hybrid ramie–cotton fabric composites , 2004 .

[7]  Sabu Thomas,et al.  Influence of Short Glass Fiber Addition on the Mechanical Properties of Sisal Reinforced Low Density Polyethylene Composites , 1997 .

[8]  Zachariah Oommen,et al.  A comparison of the mechanical properties of phenol formaldehyde composites reinforced with banana fibres and glass fibres , 2002 .

[9]  D. F. Caulfield,et al.  Effect of compatibilizer on the structure-property relationships of kenaf-fiber/polypropylene composites , 2001 .

[10]  T. Hatakeyama,et al.  Crystallization of carbon fibre reinforced polypropylene , 1990 .

[11]  Kin Liao,et al.  Environmental effects on bamboo-glass/polypropylene hybrid composites , 2003 .

[12]  A. Błędzki,et al.  Dynamic Mechanical Properties of Natural Fiber-Reinforced Epoxy Foams , 2001 .

[13]  M. Rong,et al.  Self-reinforced melt processable composites of sisal , 2003 .

[14]  R. Gauvin,et al.  Application of dynamic mechanical analysis for the study of the interfacial region in carbon fiber/epoxy composite materials , 1993 .

[15]  P. S. Chua.  Dynamic mechanical analysis studies of the interphase , 1987 .

[16]  S. Keusch,et al.  Influence of surface treatment of glass fibres on the dynamic mechanical properties of epoxy resin composites , 1999 .

[17]  Xiao Hu,et al.  Hybrid effects on tensile properties of hybrid short-glass-fiber-and short-carbon-fiber-reinforced polypropylene composites , 2001 .

[18]  S. Monteiro,et al.  Aspects of alkali treatment of sponge gourd (Luffa cylindrica) fibers on the flexural properties of polyester matrix composites , 2003 .

[19]  J. Månson,et al.  A criterion for optimum adhesion applied to fibre reinforced composites , 1997 .

[20]  Kin Liao,et al.  Effects of environmental aging on the mechanical properties of bamboo–glass fiber reinforced polymer matrix hybrid composites , 2002 .

[21]  Sabu Thomas,et al.  Thermal and dynamic mechanical analysis of polystyrene composites reinforced with short sisal fibres , 2001 .

[22]  A. Macías,et al.  Viscoelastic properties of short carbon fiber thermoplastic (SBS) elastomer composites , 1995 .

[23]  Yan Li,et al.  Sisal fibre and its composites: a review of recent developments , 2000 .

[24]  Kristiina Oksman,et al.  Morphology and mechanical properties of unidirectional sisal-epoxy composites , 2002 .