The impact of mining solutions/liquors on geosynthetics

Mine owners and operators are presented today with a diverse range of geosynthetic products which all appear to provide similar benefits. Key factors in selecting geosynthetics for use in the mining industry include construction and operational durability issues such as slope stability, puncture resistance and resistance to weathering; but also their chemical resistance when they come into contact with the extreme liquors present on many mining operations and processes. The long-term performance of the geosynthetic depends largely on the type of polymer used in the manufacture, or in the case of geosynthetic clay liners (GCLs), also on the mineralogy and chemical make of the bentonite present in the GCL. This paper provides a guide to the characteristics of the leachates/liquors likely to be generated for a given mining process and the likely effect it will have on the performance of a given geosynthetic. 2009 Elsevier Ltd. All rights reserved.

[1]  G. Józefaciuk,et al.  Effect of Acid Treatment and Alkali Treatment on Nanopore Properties of Selected Minerals , 2006 .

[2]  Abdelmalek Bouazza,et al.  Bentonite clay keeps pollutants at bay. , 2009 .

[3]  L. Laloui,et al.  Temperature Effects on Volume Change and Hydraulic Properties of Geosynthetic Clay Liners , 2008 .

[4]  Abbas Majdi,et al.  Adequate drainage system design for heap leaching structures. , 2007, Journal of Hazardous Materials.

[5]  C. Benson,et al.  Effect of Acidic Mine Drainage on the Mechanical and Hydraulic Properties of Three Geosynthetics , 2005 .

[6]  M. Hendry,et al.  Investigation of acidic dissolution of mixed clays between pH 1.0 and −3.0 using Si and Al X-ray absorption near edge structure , 2009 .

[7]  J. McCartney,et al.  Significance of unsaturated behaviour of geotextiles in earthen structures , 2006 .

[8]  R. Rowe,et al.  Ageing of HDPE geomembrane exposed to air, water and leachate at different temperatures , 2009 .

[9]  Abdelmalek Bouazza,et al.  Effect of wet-dry cycles and cation exchange on gas permeability of geosynthetic clay liners , 2006 .

[10]  J. Kodikara,et al.  Analytical modelling of gas leakage rate through a geosynthetic clay liner–geomembrane composite liner due to a circular defect in the geomembrane , 2008 .

[11]  M. Raven,et al.  Mineralogy of a bentonite from Miles, Queensland, Australia and characterisation of its acid activation products , 2002 .

[12]  R. Rowe,et al.  Metal retention in geosynthetic clay liners following permeation by different mining solutions , 2007 .

[14]  Andy Fourie,et al.  Dewatering of mine tailings using electrokinetic geosynthetics , 2007 .

[15]  D. G. Grubb,et al.  Comparison of the Durability of Geotextiles in an Alkaline Mine Tailings Environment , 2001 .

[17]  C. Benson,et al.  Effect of acidic mine drainage on the polymer properties of an HDPE geomembrane , 2004 .

[18]  J. F. Lupo,et al.  Geosynthetic design and construction approaches in the mining industry , 2007 .

[19]  A. Bouazza,et al.  Bentonite transformations in strongly alkaline solutions , 2010 .

[20]  Neil Dixon,et al.  Validation of a numerical modelling technique for multilayered geosynthetic landfill lining systems , 2008 .

[21]  Craig H. Benson,et al.  Evaluating the hydraulic conductivity of GCLs permeated with non-standard liquids , 2000 .

[22]  R. Brachman,et al.  Barrier Systems for Waste Disposal Facilities , 2004 .

[23]  A. Bouazza,et al.  Oxygen diffusion through partially hydrated geosynthetic clay liners , 2007 .

[24]  I. Fleming,et al.  Evaluation of a geosynthetic capillary barrier , 2006 .

[25]  T. Katsumi,et al.  Long-term barrier performance of modified bentonite materials against sodium and calcium permeant solutions , 2008 .

[26]  Abdelmalek Bouazza,et al.  Geosynthetic clay liners , 2002 .

[27]  Abdelmalek Bouazza,et al.  Investigation of the effects and degree of calcium exchange on the Atterberg limits and swelling of geosynthetic clay liners when subjected to wet–dry cycles , 2007 .

[28]  C. Benson,et al.  Contributions of advective and diffusive oxygen transport through multilayer composite caps over mine waste. , 2004, Journal of contaminant hydrology.

[29]  D. G. Grubb,et al.  High Altitude Exposure Testing of Geotextiles in the Peruvian Andes , 1999 .

[30]  R. Rowe.  Long-term performance of contaminant barrier systems , 2005 .

[31]  Dominique Guyonnet,et al.  Performance-based indicators for controlling geosynthetic clay liners in landfill applications , 2009 .

[32]  M. Aubertin,et al.  Evaluation of diffusive gas flux through covers with a GCL , 2000 .

[33]  P. Newman,et al.  The disposal of tailings and minewater sludge using geotextile dewatering techniques , 2004 .

[34]  Richard Thiel,et al.  State of the practice review of heap leach pad design issues , 2004 .

[35]  A. Bouazza,et al.  Liner design for waste disposal sites , 1998 .

[36]  C. Benson,et al.  Hydraulic conductivity of two geosynthetic clay liners permeated with a hyperalkaline solution , 2010 .