Application of computational fluid dynamics to fixed bed adsorption calculations: Effect of hydrodynamics at laboratory and industrial scale

A numerical model has been developed to simulate the adsorption of chemical species inside different geometries of columns filled with solid adsorbent particles. In this model hydrodynamics, mass transfer and adsorption equilibrium are accounted for. It has been applied at two different scales: at the laboratory scale in order to estimate the impact of the near wall channelling effect inside small columns, and at the industrial scale in order to calculate the equivalent axial dispersion induced by pipes or beams that can be found inside very large adsorption towers. For both applications, hydrodynamics were found to have a strong impact on the adsorption efficiency. These examples demonstrate how the use of computational fluid dynamics proves to be very relevant for process design and scale-up of adsorption columns.

[1]  M. Michael Yovanovich,et al.  NUMERICAL STUDY OF FORCED FLOW IN A BACK-STEP CHANNEL THROUGH POROUS LAYER , 2000 .

[2]  D. Vortmeyer,et al.  Measured and modeled superficial flow profiles in packed beds with liquid flow , 1998 .

[3]  Evangelos Tsotsas,et al.  A simple and coherent set of coefficients for modelling of heat and mass transport with and without chemical reaction in tubes filled with spheres , 2000 .

[4]  F. Zuiderweg,et al.  Longitudinal diffusion and resistance to mass transfer as causes of nonideality in chromatography , 1995 .

[5]  A. Rodrigues,et al.  Tracer experiments in fixed beds: effects of flow maldistribution on the estimation of transport kinetic parameters , 1994 .

[6]  On the Modeling of Flow in Packed Bed Systems , 2004 .

[7]  R. Grigg,et al.  A Criterion for Non-Darcy Flow in Porous Media , 2006 .

[8]  J. Delgado.  A critical review of dispersion in packed beds , 2006 .

[9]  S. Ergun.  Fluid flow through packed columns , 1952 .

[10]  D. Nield.  The limitations of the Brinkman-Forchheimer equation in modeling flow in a saturated porous medium and at an interface , 1991 .

[11]  J. M. Smith,et al.  Mass transfer in packed beds , 1955 .

[12]  G. Eigenberger,et al.  Fluid flow through catalyst filled tubes , 1997 .

[13]  F. López-Isunza,et al.  Hydrodynamic Models for Packed Beds with Low Tube-to-Particle Diameter Ratio , 2008 .

[14]  C. Ching,et al.  Computational fluid dynamics simulation of the adsorption separation of three components in high performance liquid chromatography , 2002 .

[15]  Paul Zulli,et al.  Simulation of Turbulent Flow in a Packed Bed , 2006 .

[16]  J. Schuster,et al.  Evaluation of steady flow profiles in rectangular and circular packed beds by a variational method , 1983 .

[17]  Sung Jin Kim,et al.  On the limitations of the Brinkman-Forchheimer-extended Darcy equation , 1995 .

[18]  J. Smith,et al.  Axial dispersion in packed beds with large wall effect , 1986 .

[19]  P. Moulin,et al.  Biodegradation of High Phenol Concentration in a Membrane Bioreactor , 2008 .

[20]  G. Froment,et al.  A simulation model accounting for structural radial nonuniformities in fixed bed reactors , 1988 .

[21]  E. A. Foumeny,et al.  Estimation of dispersion coefficients in packed beds , 1992 .

[22]  C. L. Tien,et al.  Boundary and inertia effects on convective mass transfer in porous media , 1982 .

[23]  Douglas M. Ruthven,et al.  Principles of Adsorption and Adsorption Processes , 1984 .

[24]  James J. Carberry,et al.  Axial dispersion of mass in flow through fixed beds , 1958 .