Grafting thermoresponsive polymers onto honeycomb structured porous films using the RAFT process

Honeycomb structured porous polymer films were grafted with a thermo-responsive polymer poly(N-isopropylacrylamide) (PNIPAAm) using reversible addition fragmentation chain transfer polymerization (RAFT) under γ-irradiation in the presence of an additional RAFT agent (S,S-bis(α,α′-dimethyl-α″-acetic acid)trithiocarbonate) in solution. The honeycomb structured porous films were successfully prepared from different RAFT group containing polymers (a polystyrene comb and a random copolymer composed of styrene and 2-hydroxyethylmethacrylate PS-ran-PHEMA synthesized in the presence of trithiocarbonates) and from PS-ran-PHEMA obtained viafree radical polymerization as a control experiment. Atomic force microscopy (AFM), confocal fluorescent microscopy and contact angle measurements confirm the presence of PNIPAAm chains on RAFT containing polymers while grafted chains were absent in films without any thiocarbonylthio functionality. Microscopy studies (AFM and confocal fluorescent) reveal the presence of PNIPAAm chains primarily inside the pores, clogging the pores in the hydrated state. AFM studies in conjunction with wettability studies confirm the influence of the NIPAAm/RAFT agent ratio in solution with the contact angle decreasing with increasing molecular weight of the attached PNIPAAm chain. The PNIPAAm grafted films were employed to study the cell attachment of fibroblast cells showing that increasing hydrophilicity is beneficial for honeycomb structured porous films to enhance the interaction between the surface and the cells.

[1]  Masatsugu Shimomura,et al.  Honeycomb Films of Biodegradable Polymers for Tissue Engineering , 2002 .

[2]  U. Bunz,et al.  Facile Microstructuring of Organic Semiconducting Polymers by the Breath Figure Method: Hexagonally Ordered Bubble Arrays in Rigid Rod‐Polymers , 2004 .

[3]  P. Braun,et al.  Patterned poly(N-isopropylacrylamide) brushes on silica surfaces by microcontact printing followed by surface-initiated polymerization. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[4]  M. Yamaga,et al.  Effect of honeycomb-patterned structure on chondrocyte behavior in vitro , 2008 .

[5]  T. Fukuda,et al.  Mechanism and kinetics of RAFT-mediated graft polymerization of styrene on a solid surface. 1. Experimental evidence of surface radical migration , 2001 .

[6]  Sébastien Perrier,et al.  Graft Polymerization: Grafting Poly(styrene) from Cellulose via Reversible Addition−Fragmentation Chain Transfer (RAFT) Polymerization , 2005 .

[7]  W. Saltzman,et al.  Topographical control of human neutrophil motility on micropatterned materials with various surface chemistry. , 2002, Biomaterials.

[8]  L. Connal Flexible Honeycomb Films , 2007 .

[9]  H. Yabu,et al.  Preparation of Honeycomb-Patterned Polyimide Films by Self-Organization , 2003 .

[10]  A. Fane,et al.  Porous Polymer Films and Honeycomb Structures Made by the Self‐Organization of Well‐Defined Macromolecular Structures Created by Living Radical Polymerization Techniques , 2001 .

[11]  Xiaolong Zhu,et al.  Effects of topography and composition of titanium surface oxides on osteoblast responses. , 2004, Biomaterials.

[12]  Robert L. Clark,et al.  Micro-cantilevers with end-grafted stimulus-responsive polymer brushes for actuation and sensing , 2006 .

[13]  Wilhelm Pfleging,et al.  Laser-assisted modification of polystyrene surfaces for cell culture applications , 2007 .

[14]  Masaru Tanaka,et al.  Control of hepatocyte adhesion and function on self-organized honeycomb-patterned polymer film , 2006 .

[15]  Yuliang Yang,et al.  Controlled Chain Branching by RAFT-Based Radical Polymerization , 2003 .

[16]  S. Perrier,et al.  Synthesis of natural-synthetic hybrid materials from cellulose via the RAFT process. , 2007, Soft matter.

[17]  Jayachandran N. Kizhakkedathu,et al.  Synthesis of well-defined environmentally responsive polymer brushes by aqueous ATRP , 2004 .

[18]  C. Barner‐Kowollik,et al.  Polystyrene comb polymers built on cellulose or poly(styrene-co-2-hydroxyethylmethacrylate) backbones as substrates for the preparation of structured honeycomb films , 2005 .

[19]  Bernard François,et al.  Self-organized honeycomb morphology of star-polymer polystyrene films , 1994, Nature.

[20]  Kyle N. Plunkett,et al.  PNIPAM chain collapse depends on the molecular weight and grafting density. , 2006, Langmuir : the ACS journal of surfaces and colloids.

[21]  H. Jiang,et al.  Synthesis of Gold Nanoparticles Grafted with a Thermoresponsive Polymer by Surface-Induced Reversible-Addition-Fragmentation Chain-Transfer Polymerization , 2003 .

[22]  B. Kasemo,et al.  Response of rat osteoblast-like cells to microstructured model surfaces in vitro. , 2003, Biomaterials.

[23]  M. Urban,et al.  Modification of Gold Surfaces With Water-Soluble (Co)polymers Prepared Via Aqueous Reversible Addition-Fragmentation Chain Transfer (RAFT) Polymerization , 2003 .

[24]  S. Perrier,et al.  RAFT Graft Polymerization of 2-(Dimethylaminoethyl) Methacrylate onto Cellulose Fibre , 2006 .

[25]  Masatsugu Shimomura,et al.  Superhydrophobic and lipophobic properties of self-organized honeycomb and pincushion structures. , 2005, Langmuir : the ACS journal of surfaces and colloids.

[26]  S. Perrier,et al.  Synthesis of Well-Defined Homopolymer and Diblock Copolymer Grafted onto Silica Particles by Z-Supported RAFT Polymerization , 2006 .

[27]  J. Quinn,et al.  Facile synthesis of comb, star, and graft polymers via reversible addition–fragmentation chain transfer (RAFT) polymerization , 2002 .

[28]  Thomas J Webster,et al.  Nano-structured polymers enhance bladder smooth muscle cell function. , 2003, Biomaterials.

[29]  Leonie Barner,et al.  RAFT Polymerization of N‐Isopropylacrylamide and Acrylic Acid under γ‐Irradiation in Aqueous Media , 2006 .

[30]  Masaru Tanaka,et al.  Effect of pore size of honeycomb films on the morphology, adhesion and cytoskeletal organization of cardiac myocytes , 2008 .

[31]  C. Barner‐Kowollik,et al.  Honeycomb structured porous films from amphiphilic block copolymers prepared via RAFT polymerization , 2007 .

[32]  W. Brittain,et al.  Synthesis and Characterization of Stimuli-Responsive Semifluorinated Polymer Brushes Prepared by Atom Transfer Radical Polymerization , 2004 .

[33]  C. Pan,et al.  The Coil-to-Globule-to-Brush Transition of Linear Thermally Sensitive Poly(N-isopropylacrylamide) Chains Grafted on a Spherical Microgel , 2002 .

[34]  M. Ulbricht,et al.  Permeability and electrokinetic characterization of poly(ethylene terephthalate) capillary pore membranes with grafted temperature-responsive polymers. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[35]  Thomas P. Davis,et al.  Formation of honeycomb-structured, porous films via breath figures with different polymer architectures , 2006 .

[36]  Martina H. Stenzel,et al.  Formation of Regular Honeycomb-Patterned Porous Film by Self-Organization , 2002 .

[37]  Nilhan Kayaman‐Apohan,et al.  Preparation, characterization, and drug‐release properties of poly(N‐isopropylacrylamide) microspheres having poly(itaconic acid) graft chains , 2005 .

[38]  Leonie Barner,et al.  Synthesis of core‐shell poly(divinylbenzene) microspheres via reversible addition fragmentation chain transfer graft polymerization of styrene , 2004 .

[39]  C. Barner‐Kowollik,et al.  Water-assisted formation of honeycomb structured porous films , 2006 .

[40]  M. Ulbricht,et al.  Controlled pore functionalization of poly(ethylene terephthalate) track-etched membranes via surface-initiated atom transfer radical polymerization. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[41]  H. Busscher,et al.  Plasma-treated polystyrene surfaces: model surfaces for studying cell-biomaterial interactions. , 2004, Biomaterials.

[42]  A. Curtis,et al.  Rapid fibroblast adhesion to 27nm high polymer demixed nano-topography. , 2004, Biomaterials.

[43]  Ting Xu,et al.  Hierarchical nanoparticle assemblies formed by decorating breath figures , 2004, Nature materials.

[44]  B. Benicewicz,et al.  Synthesis of well-defined polymer brushes grafted onto silica nanoparticles via surface reversible addition-fragmentation chain transfer polymerization , 2005 .

[45]  William J. Brittain,et al.  Synthesis of Polymer Brushes on Silicate Substrates via Reversible Addition Fragmentation Chain Transfer Technique , 2002 .

[46]  C. Barner‐Kowollik,et al.  A simple approach to micro-patterned surfaces by breath figures with internal structure using thermoresponsive amphiphilic block copolymers , 2005 .

[47]  Leonie Barner,et al.  Verification of Controlled Grafting of Styrene from Cellulose via Radiation-Induced RAFT Polymerization , 2007 .

[48]  A. Kishida,et al.  Fabrication of High-Density Polymer Brush on Polymer Substrate by Surface-Initiated Living Radical Polymerization , 2005 .

[49]  Stephan Herminghaus,et al.  How plants keep dry: a physicist's point of view. , 2004, Langmuir : the ACS journal of surfaces and colloids.

[50]  M. Shimomura,et al.  Water-Assisted Formation of Micrometer-Size Honeycomb Patterns of Polymers , 2000 .

[51]  R. Pelton,et al.  Temperature-Dependent Contact Angles of Water on Poly(N-isopropylacrylamide) Gels , 1995 .

[52]  K. Neoh,et al.  Functionalization of Hydrogen-Terminated Silicon with Polybetaine Brushes via Surface-Initiated Reversible Addition−Fragmentation Chain-Transfer (RAFT) Polymerization , 2004 .

[53]  K. Neoh,et al.  Functionalization of Hydrogen-Terminated Si(100) Substrate by Surface-Initiated RAFT Polymerization of 4-Vinylbenzyl Chloride and Subsequent Derivatization for Photoinduced Metallization , 2004 .

[54]  Masaru Tanaka,et al.  Control of neural stem cell differentiation on honeycomb films , 2008 .

[55]  William J. Brittain,et al.  Polymer brushes––surface immobilized polymers , 2004 .

[56]  Moon Suk Kim,et al.  Correlation of proliferation, morphology and biological responses of fibroblasts on LDPE with different surface wettability , 2007, Journal of biomaterials science. Polymer edition.

[57]  T. Okano,et al.  Mechanism of cell detachment from temperature-modulated, hydrophilic-hydrophobic polymer surfaces. , 1995, Biomaterials.

[58]  Shin-Ichiro Nishimura,et al.  Honeycomb-patterned thin films of amphiphilic polymers as cell culture substrates , 1999 .

[59]  C. Barner‐Kowollik,et al.  Nano- and micro-engineering of ordered porous blue-light-emitting films by templating well-defined organic polymers around condensing water droplets. , 2003, Angewandte Chemie.

[60]  J. Lai,et al.  Functional Polymers from Novel Carboxyl-Terminated Trithiocarbonates as Highly Efficient RAFT Agents , 2002 .

[61]  O. Pitois,et al.  Formation of ordered micro-porous membranes , 1999 .

[62]  A S G Curtis,et al.  Fibroblast reaction to island topography: changes in cytoskeleton and morphology with time. , 2003, Biomaterials.

[63]  Y. Nishiura,et al.  Micropatterns Based on Deformation of a Viscoelastic Honeycomb Mesh , 2003 .