DC servomechanism parameter identification: a Closed Loop Input Error approach.

This paper presents a Closed Loop Input Error (CLIE) approach for on-line parametric estimation of a continuous-time model of a DC servomechanism functioning in closed loop. A standard Proportional Derivative (PD) position controller stabilizes the loop without requiring knowledge on the servomechanism parameters. The analysis of the identification algorithm takes into account the control law employed for closing the loop. The model contains four parameters that depend on the servo inertia, viscous, and Coulomb friction as well as on a constant disturbance. Lyapunov stability theory permits assessing boundedness of the signals associated to the identification algorithm. Experiments on a laboratory prototype allows evaluating the performance of the approach.

[1]  Karl Johan Åström,et al.  PID Controllers: Theory, Design, and Tuning , 1995 .

[2]  Kok Kiong Tan,et al.  Automatic Tuning of Two-Degree-of-Freedom Control for D.C. Servo Motor Systems , 2000, Intell. Autom. Soft Comput..

[3]  Chyun-Chau Fuh,et al.  Adaptive parameter identification of servo control systems with noise and high-frequency uncertainties , 2007 .

[4]  Petros A. Ioannou,et al.  Robust Adaptive Control , 2012 .

[5]  Kok Kiong Tan,et al.  Friction modeling and adaptive compensation using a relay feedback approach , 2001, IEEE Trans. Ind. Electron..

[6]  S. Sastry,et al.  Adaptive Control: Stability, Convergence and Robustness , 1989 .

[7]  Javier Moreno,et al.  On Motor Velocity Control by Using Only Position Measurements: Two Case Studies , 2002 .

[8]  Ioan Doré Landau,et al.  Identification in closed loop: a powerful design tool (better design models, simpler controllers) , 2001 .

[9]  Shinichi Kobayashi,et al.  Dynamic model based auto-tuning digital servo driver , 1995, IEEE Trans. Ind. Electron..

[10]  O. Nelles.  Nonlinear System Identification , 2001 .

[11]  R.D. Lorenz,et al.  Design principles and implementation of acceleration feedback to improve performance of DC drives , 1990, Conference Record of the 1990 IEEE Industry Applications Society Annual Meeting.

[12]  Stefan Preitl,et al.  PI and PID controllers tuning for integral-type servo systems to ensure robust stability and controller robustness , 2006 .

[13]  E J Adam,et al.  Identification and robust control of an experimental servo motor. , 2002, ISA transactions.

[14]  Lennart Ljung,et al.  Closed-loop identification revisited , 1999, Autom..

[15]  Ioan Doré Landau,et al.  An output error recursive algorithm for unbiased identification in closed loop , 1996, Autom..

[16]  Aurelio Piazzi,et al.  A servo control system design using dynamic inversion , 2002 .

[17]  Javier Moreno-Valenzuela,et al.  Learning PID structures in an introductory course of automatic control , 2001, IEEE Trans. Educ..

[18]  Xuedong Chen,et al.  A fast method for online closed-loop system identification , 2006 .

[19]  Petre Stoica,et al.  Decentralized Control , 2018, The Control Systems Handbook.

[20]  Kok Kiong Tan,et al.  Automatic Friction Identification and Compensation with a Self-Adapting Dual Relay , 2003, Intell. Autom. Soft Comput..

[21]  Ser Yong Lim,et al.  Iterative learning control of permanent magnet linear motor with relay automatic tuning , 2000 .

[22]  T. Sato,et al.  Auto-tuning of two-degree-of-freedom motor control for high-accuracy trajectory motion , 1996 .

[23]  Alina Voda,et al.  Analysis of a two-relay system configuration with application to Coulomb friction identification , 1999, Autom..