Structure and properties of a composite material obtained by thermal explosion in a mixture of Ni + Al + Cr2O3

[1]  R. Jeanloz,et al.  Yield strength of Ni–Al–Cr superalloy under pressure , 2016 .

[2]  Fen Wang,et al.  Microstructures and mechanical properties of (Ti,Cr)Al/Al2O3 composites fabricated by reactive hot pressing from Ti, Al and Cr2O3 , 2013 .

[3]  C. Yeh,et al.  Combustion synthesis of Cr–Al and Cr–Si intermetallics with Al2O3 additions from Cr2O3–Al and Cr2O3–Al–Si reaction systems , 2013 .

[4]  A. Drozdov,et al.  Composite materials with an intermetallic matrix based on nickel and titanium monoaluminides hardened by oxide particles or fibers , 2011 .

[5]  X. Sun,et al.  Mechanism of the oxidation and degradation of the aluminide coating on the nickel-base single-crystal superalloy DD32M , 2010 .

[6]  L. Kommel,et al.  Multiphase Forming in Lightweight Composites during SHS Reaction , 2008 .

[7]  Fu-hui Wang,et al.  The oxidation behavior of Ti–46.5Al–5Nb at 900 °C , 2007 .

[8]  J. Lapin,et al.  Microstructural stability of a cast Ti–45.2Al–2W–0.6Si–0.7B alloy at temperatures 973–1073K , 2006 .

[9]  K. Mccarty,et al.  Surface and interface segregation in β-NiAl with and without Pt addition , 2006 .

[10]  Pan Ye,et al.  Combustion Synthesis and Densification of Cr-Al(Cr)2O3 Cermets , 2005 .

[11]  D. Clarke,et al.  On the rumpling mechanism in nickel-aluminide coatings , 2004 .

[12]  O. Skachkov.  Heat-resistant structural-grade powder alloys , 2004 .

[13]  Sujit Roy,et al.  A study of self-propagating high-temperature synthesis of NiAl in thermal explosion mode , 2002 .

[14]  Y. Tamarin.  Protective Coatings for Turbine Blades , 2002 .

[15]  G. F. Chen,et al.  Predicting the oxide formation of Ni-Cr-Al alloys with nano-sized grain , 2000 .