A system mean void fraction model for predicting various transient phenomena associated with two-phase evaporating and condensing flows

The system mean void fraction model's principle virtue is its simplicity. The model converts the two-phase evaporating or condensing flow system into a type of lumped parameter system, generally yielding simple, closed form solutions in terms of the important system parameters. The particular applications of the model which are demonstrated in this paper are for a class of transient flow problems where complete vaporization or condensation takes place, and where the system mean void fraction can be considered to be time-invariant. This assumption uncouples the problem from the transient form of the momentum principle, an analytical simplification of considerable magnitude. The specific transients under consideration are caused by changes in the inlet flowrate. For evaporating flows, these transients are the effective liquid dry-out point, and the outlet flowrate of superheated vapor. For condensing flows, they are the effective point of complete condensation, and the outlet flowrate of subcooled liquid.

[1]  G. L. Wedekind,et al.  Theoretical Model of the Mixture-Vapor Transition Point Oscillations Associated With Two-Phase Evaporating Flow Instabilities , 1974 .

[2]  C. Rufer,et al.  Analysis of Two-Phase, One-Component Stratified Flow With Condensation , 1966 .

[3]  Owen C. Jones,et al.  The interrelation between void fraction fluctuations and flow patterns in two-phase flow , 1975 .

[4]  S. Zivi Estimation of Steady-State Steam Void-Fraction by Means of the Principle of Minimum Entropy Production , 1964 .

[5]  W. F. Stoecker,et al.  Theoretical Model for Predicting the Transient Response of the Mixture-Vapor Transition Point in Horizontal Evaporating Flow , 1968 .

[6]  S. Levy,et al.  Steam Slip—Theoretical Prediction From Momentum Model , 1960 .

[7]  Fred W. Staub,et al.  THE PROPAGATION AND THE WAVE FORM OF THE VAPOR VOLUMETRIC CONCENTRATION IN BOILING, FORCED CONVECTION SYSTEM UNDER OSCILLATORY CONDITIONS , 1966 .

[8]  G. Wallis One Dimensional Two-Phase Flow , 1969 .

[9]  G. Wedekind,et al.  An Experimental and Theoretical Investigation Into Thermally Governed Transient Flow Surges in Two-Phase Condensing Flow , 1977 .

[10]  G. L. Wedekind,et al.  An Experimental Investigation Into the Oscillatory Motion of the Mixture-Vapor Transition Point in Horizontal Evaporating Flow , 1971 .

[11]  J. Thome,et al.  Convective Boiling and Condensation , 1972 .

[12]  Richard T. Lahey,et al.  An Exact Solution for Flow Transients in Two-Phase Systems by the Method of Characteristics , 1973 .

[13]  H. Fujie A relation between steam quality and void fraction in two-phase flow , 1964 .

[14]  W. T. Hancox,et al.  A general technique for the prediction of void distributions in non-steady two-phase forced convection , 1971 .

[15]  St. Pierre,et al.  Frequency-Response Analysis of Steam Voids to Sinusoidal Power Modulation in a Thin-Walled Boiling Water Coolant Channel , 1965 .